LX1553IM

LX1553IM Datasheet

LX1552/3/4/5

Part	Datasheet
LX1553IM	LX1553IM (pdf)

Related Parts	Information
LX1554CM	LX1554CM
LX1552IM	LX1552IM
LX1554MY	LX1554MY
LX1554IM	LX1554IM
LX1554IDM	LX1554IDM
LX1554ID	LX1554ID
LX1552MY	LX1552MY
LX1552CPW	LX1552CPW
LX1554CDM	LX1554CDM
LX1554CD	LX1554CD
LX1552CM	LX1552CM
LX1552ID	LX1552ID
LX1552IDM	LX1552IDM
LX1552CDM	LX1552CDM
LX1554CPW	LX1554CPW
LX1555IDM	LX1555IDM
LX1555IM	LX1555IM
LX1555MY	LX1555MY
LX1555CPW	LX1555CPW
LX1553CM	LX1553CM
LX1553CPW	LX1553CPW
LX1553CD	LX1553CD
LX1555CM	LX1555CM
LX1553ID	LX1553ID
LX1553IDM	LX1553IDM
LX1553CDM	LX1553CDM
LX1555ID	LX1555ID
LX1555CD	LX1555CD
LX1553MY	LX1553MY
LX1555CDM	LX1555CDM

PDF Datasheet Preview
NOT RECOOBMSMOENLDEETDEFOPRRNOEDWUDECSTIGNS LX1552/3/4/5 ULTRA-LOW START-UP CURRENT, CURRENT-MODE PWM THE INFINITE POWER OF INNOVATION PRODUCTION DATA SHEET The LX155x family of ultra-low start-up current 250µA max , current mode control ICs offer new levels of energy efficiency for offline converter applications. They are ideally optimized for personal computer and CRT power supplies although they can be used in any number of off-line applications where energy efficiency is critical. Coupled with the fact that the LX155x series requires a minimal set of external components, the series offers an excellent value for cost conscious consumer applications. Optimizing energy efficiency, the LX155x series demonstrates a significant power reduction as compared with other similar off-line controllers. Table 1 compares the SG384x, UC384xA and the LX155x start-up resistor power dissipation. The LX155x offers an overall 4X reduction in power dissipation. Additionally, the precise oscillator discharge current gives the power supply designer considerable flexibility in optimizing system duty cycle consistency. The current mode architecture demonstrates improved load regulation, pulse by pulse current limiting and inherent protection of the power supply output switch. The LX155x includes a bandgap reference trimmed to 1%, an error amplifier, a current sense comparator internally clamped to 1V, a high current totem pole output stage for fast switching of power MOSFETs, and an externally programmable oscillator to set operating frequency and maximum duty cycle. The under voltage lock-out circuitry is designed to operate with as little as 250µA of supply current permitting very efficient bootstrap designs. IMPORTANT For the most current data, consult MICROSEMI’s website: KEY FEATURES - Ultra-Low Start-up Current 150µA Typical - Trimmed Oscillator Discharge Current ±2% Typical - Initial Oscillator Frequency Better Than ±4% - Output Pulldown During UVLO - Precision 2.5V Reference ±2 maximum - Current Sense Delay to Output 150ns Typical - Automatic Feed Forward Compensation - Pulse-by-Pulse Current Limiting - Enhanced Load response Characteristics - Under-Voltage Lockout with Hysteresis - Double Pulse Suppression - High Current Totem Pole Output ±1A Peak - 500KHz Operation PRODUCT HIGHLIGHT Typical Application of LX155x Using Its MicroPower Start-Up Feature AC INPUT I ST VCC LX1552 LX1554 Design Using Max. Start-up Current Specification IST Typical Start-up Resistor Value RST Max. Start-up Resistor Power Dissipation PR SG384x 1000µA 2.26W UC384xA 500µA 1.13W LX155x 250µA 0.56W Note Calculation is done for universal AC input specification of VACMIN = 90VRMS to VACMAX = 256VRMS using the following equation resistor current is selected to be 2 * IST VACMIN

PDF Datasheet Preview

NOT RECOOBMSMOENLDEETDEFOPRRNOEDWUDECSTIGNS

LX1552/3/4/5

ULTRA-LOW START-UP CURRENT, CURRENT-MODE PWM

THE INFINITE POWER OF INNOVATION

PRODUCTION DATA SHEET

The LX155x family of ultra-low start-up current 250µA max , current mode control ICs offer new levels of energy efficiency for offline converter applications. They are ideally optimized for personal computer and CRT power supplies although they can be used in any number of off-line applications where energy efficiency is critical. Coupled with the fact that the LX155x series requires a minimal set of external components, the series offers an excellent value for cost conscious consumer applications.

Optimizing energy efficiency, the LX155x series demonstrates a significant power reduction as compared with other similar off-line controllers. Table 1 compares the SG384x, UC384xA and the LX155x start-up resistor power dissipation. The LX155x offers an overall 4X reduction in power dissipation.

Additionally, the precise oscillator discharge current gives the power supply designer considerable flexibility in optimizing system duty cycle consistency.

The current mode architecture demonstrates improved load regulation, pulse by pulse current limiting and inherent protection of the power supply output switch. The LX155x includes a bandgap reference trimmed to 1%, an error amplifier, a current sense comparator internally clamped to 1V, a high current totem pole output stage for fast switching of power MOSFETs, and an externally programmable oscillator to set operating frequency and maximum duty cycle. The under voltage lock-out circuitry is designed to operate with as little as 250µA of supply current permitting very efficient bootstrap designs.

IMPORTANT For the most current data, consult MICROSEMI’s website:

KEY FEATURES
- Ultra-Low Start-up Current 150µA

Typical
- Trimmed Oscillator Discharge

Current ±2% Typical
- Initial Oscillator Frequency Better

Than ±4%
- Output Pulldown During UVLO - Precision 2.5V Reference ±2
maximum
- Current Sense Delay to Output
150ns Typical
- Automatic Feed Forward

Compensation
- Pulse-by-Pulse Current Limiting - Enhanced Load response

Characteristics
- Under-Voltage Lockout with

Hysteresis
- Double Pulse Suppression - High Current Totem Pole Output
±1A Peak
- 500KHz Operation

PRODUCT HIGHLIGHT

Typical Application of LX155x Using Its MicroPower Start-Up Feature

AC INPUT

I ST VCC

LX1552

LX1554

Design Using Max. Start-up Current Specification IST Typical Start-up Resistor Value RST Max. Start-up Resistor Power Dissipation PR

SG384x 1000µA 2.26W

UC384xA 500µA 1.13W

LX155x 250µA 0.56W

Note Calculation is done for universal AC input specification of VACMIN = 90VRMS to VACMAX = 256VRMS using the following equation resistor current is selected to be 2 * IST VACMIN

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LX1553IM Datasheet file may be downloaded here without warranties.

Datasheet ID: LX1553IM 649001