MPT-8

MPT-8 Datasheet

1N6356 thru 1N6372, e3 or MPT-5 thru MPT-45C, e3

Part	Datasheet
MPT-8	MPT-8 (pdf)

Related Parts	Information
1N6356	1N6356
1N6357	1N6357
MPT-5	MPT-5
MPT-8C	MPT-8C

PDF Datasheet Preview
SCOTTSDALE DIVISION 1N6356 thru 1N6372, e3 or MPT-5 thru MPT-45C, e3 1500 W LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR .COM APPEARANCE This Transient Voltage Suppressor TVS series for 1N6356 thru 1N6372 are JEDEC registered selections for both unidirectional and bidirectional devices. The 1N6356 thru 1N6364 are unidirectional and the 1N6365 thru 1N6372 are bi-directional where they all provide a very low specified clamping factor for minimal clamping voltages VC above their respective breakdown voltages VBR as specified herein. They are most often used in protecting sensitive components from inductive switching transients or induced secondary lightning effects as found in lower surge levels of IEC61000-4-5 They are also very successful in protecting airborne avionics and electrical systems. Since their response time is virtually instantaneous, they can also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. IMPORTANT For the most current data, consult MICROSEMI’s website: DO-13 DO-202AA APPLICATIONS / BENEFITS • Unidirectional and bidirectional TVS series for thru-hole mounting • Suppresses transients up to 1500 watts 10/1000 µs • tclamping 0 volts to V BR min Unidirectional Less than 100 pico seconds. Bidirectional Less than 5 nano seconds. • Working voltage VWM range 5 V to 45 V • Low clamping factor ratio of actual VC/VBR full rated power and 50% rated power • Hermetic sealed DO-13 metal package • Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, JANTXV, and JANS are also available by adding MQ, MX, MV, SP prefixes respectively to part numbers, e.g. MX1N6356, etc. • RoHS Compliant devices available by adding “e3” suffix • Surface mount equivalent packages also available as SMCJ6356 SMCJ6372 consult factory for other surface mount options • Plastic axial-leaded equivalents available in the 1N6373 1N6389 series see separate data sheet • Designed to protect Bipolar and MOS Microprocessor based systems. • Protection from switching transients and induced RF • ESD and EFT protection per IEC 61000-4-2 and -4-4 • Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance Class 1, 2 & 3 1N6356 to 1N6372 Class 4 1N6356 to 1N6362 • Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance Class 1 & 2 1N6356 to 1N6372 Class 3 1N6356 to 1N6362 Class 4 1N6356 to 1N6358 • Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance Class 2 1N6356 to 1N6361 Class 3 1N6356 to 1N6358 • Inherently radiation hard per Microsemi MicroNote 050 MAXIMUM RATINGS MECHANICAL AND PACKAGING • 1500 Watts for 10/1000 us with repetition rate of or less* at lead temperature TL 25oC See Figs. 1, 2, & 4 • Operating & Storage Temperatures -65o to +175oC • THERMAL RESISTANCE 50oC/W junction to lead at inches 10 mm from body or 110 oC/W junction to ambient when mounted on FR4 PC board with 4 mm2 copper pads 1 oz and track width 1 mm, length 25 mm • DC Power Dissipation* 1 Watt at TL < +125oC 3/8” or 10 mm from body also see Figure 5 • Forward surge current 200 Amps for 8.3ms half-sine wave at TA = +25oC for unidirectional only 1N6356-6364 • Solder Temperatures 260 o C for 10 s maximum • CASE DO-13 DO-202AA , welded, hermetically sealed metal and glass • FINISH All external metal surfaces are Tin-Lead or RoHS Compliant annealed matte-Tin plating solderable per MIL-STD-750 method 2026 • POLARITY Cathode connected to case and polarity indicated by diode symbol • MARKING Part number and polarity diode symbol • WEIGHT grams. Approx • TAPE & REEL option Standard per EIA-296 add “TR” suffix to part number • See package dimension on last page

PDF Datasheet Preview

SCOTTSDALE DIVISION
1N6356 thru 1N6372, e3 or MPT-5 thru MPT-45C, e3
1500 W LOW CLAMPING FACTOR TRANSIENT VOLTAGE SUPPRESSOR
.COM

APPEARANCE

This Transient Voltage Suppressor TVS series for 1N6356 thru 1N6372 are JEDEC registered selections for both unidirectional and bidirectional devices. The 1N6356 thru 1N6364 are unidirectional and the 1N6365 thru 1N6372 are bi-directional where they all provide a very low specified clamping factor for minimal clamping voltages VC above their respective breakdown voltages VBR as specified herein. They are most often used in protecting sensitive components from inductive switching transients or induced secondary lightning effects as found in lower surge levels of IEC61000-4-5 They are also very successful in protecting airborne avionics and electrical systems. Since their response time is virtually instantaneous, they can also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4.

IMPORTANT For the most current data, consult MICROSEMI’s website:

DO-13 DO-202AA

APPLICATIONS / BENEFITS
• Unidirectional and bidirectional TVS series for thru-hole mounting
• Suppresses transients up to 1500 watts 10/1000 µs
• tclamping 0 volts to V BR min Unidirectional Less than 100 pico seconds. Bidirectional Less than 5 nano seconds.
• Working voltage VWM range 5 V to 45 V
• Low clamping factor ratio of actual VC/VBR full rated power and 50% rated power
• Hermetic sealed DO-13 metal package
• Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, JANTXV, and JANS are also available by adding MQ, MX, MV, SP prefixes respectively to part numbers, e.g. MX1N6356, etc.
• RoHS Compliant devices available by adding “e3” suffix
• Surface mount equivalent packages also available as SMCJ6356 SMCJ6372 consult factory for other surface mount options
• Plastic axial-leaded equivalents available in the 1N6373 1N6389 series see separate data sheet
• Designed to protect Bipolar and MOS Microprocessor based systems.
• Protection from switching transients and induced RF
• ESD and EFT protection per IEC 61000-4-2 and -4-4
• Secondary lightning protection per IEC61000-4-5 with
42 Ohms source impedance Class 1, 2 & 3 1N6356 to 1N6372 Class 4 1N6356 to 1N6362
• Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance Class 1 & 2 1N6356 to 1N6372 Class 3 1N6356 to 1N6362 Class 4 1N6356 to 1N6358
• Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance Class 2 1N6356 to 1N6361 Class 3 1N6356 to 1N6358
• Inherently radiation hard per Microsemi MicroNote 050

MAXIMUM RATINGS

MECHANICAL AND PACKAGING
• 1500 Watts for 10/1000 us with repetition rate of or less* at lead temperature TL 25oC See Figs. 1, 2, & 4
• Operating & Storage Temperatures -65o to +175oC
• THERMAL RESISTANCE 50oC/W junction to lead at
inches 10 mm from body or 110 oC/W junction to ambient when mounted on FR4 PC board with 4 mm2 copper pads 1 oz and track width 1 mm, length 25 mm
• DC Power Dissipation* 1 Watt at TL < +125oC 3/8” or 10
mm from body also see Figure 5
• Forward surge current 200 Amps for 8.3ms half-sine wave at TA = +25oC for unidirectional only 1N6356-6364
• Solder Temperatures 260 o C for 10 s maximum
• CASE DO-13 DO-202AA , welded, hermetically sealed metal and glass
• FINISH All external metal surfaces are Tin-Lead or RoHS Compliant annealed matte-Tin plating solderable per MIL-STD-750 method 2026
• POLARITY Cathode connected to case and polarity indicated by diode symbol
• MARKING Part number and polarity diode symbol
• WEIGHT grams. Approx
• TAPE & REEL option Standard per EIA-296 add “TR” suffix to part number
• See package dimension on last page

More datasheets: XE164KM48F80LAAFXUMA1 | SAF-XE164HM-24F80L AA | ICS83947AYILN | 1731120058 | 76650-0095 | MDM-21SH027P | DDMC-36C4P-J-K87 | 1N6356 | 1N6357 | MPT-5

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MPT-8 Datasheet file may be downloaded here without warranties.

Datasheet ID: MPT-8 648567