CDLL4614

CDLL4614 Datasheet

CDLL4614 thru CDLL4627

Part	Datasheet
CDLL4614	CDLL4614 (pdf)

Related Parts	Information
CDLL4626	CDLL4626
CDLL4627	CDLL4627
CDLL4621	CDLL4621
CDLL4623	CDLL4623
CDLL4616	CDLL4616
CDLL4615	CDLL4615
CDLL4619	CDLL4619
CDLL4622	CDLL4622
CDLL4617	CDLL4617
CDLL4620	CDLL4620
CDLL4625	CDLL4625
CDLL4624	CDLL4624
CDLL4618	CDLL4618

PDF Datasheet Preview
• 1N4614UR-1 THRU 1N4627UR-1 AVAILABLE IN JAN, JANTX, JANTXV AND JANS PER MIL-PRF-19500/435 • LEADLESS PACKAGE FOR SURFACE MOUNT • LOW CURRENT OPERATION AT 250 µA • METALLURGICALLY BONDED 1N4614UR-1 thru 1N4627UR-1 and CDLL4614 thru CDLL4627 MAXIMUM RATINGS Operating Temperatures -65°C to +175°C DC Power Dissipation 500mW TEC = +125°C Power Derating 10 mW / °C above TEC = +125°C Forward Voltage 200 mA Volts maximum ELECTRICAL CHARACTERISTICS 25°C, unless otherwise CDI TYPE NUMBER CDLL4614 CDLL4615 CDLL4616 CDLL4617 CDLL4618 CDLL4619 CDLL4620 CDLL4621 CDLL4622 CDLL4623 CDLL4624 CDLL4625 CDLL4626 CDLL4627 NOMINAL ZENER VOLTAGE V Note 1 VOLTS ZENER TEST CURRENT µA 250 MAXIMUM ZENER IMPEDANCE Z ZT Note 2 OHMS 1200 1250 1300 1400 1500 1600 1650 1700 1650 1600 1550 1500 1400 1200 VOLTS MAXIMUM DC ZENER CURRENT mA 120 110 100 95 90 87 85 83 80 77 75 70 65 61 NOTE 1 NOTE 2 The CDI type numbers shown above have a Zener voltage tolerance of Nominal Zener voltage is measured with the device junction in thermal equilibrium at an ambient temperature of 25°C + 3°C. "C" suffix denotes a + 2% tolerance and "D" suffix denotes a + 1% tolerance. Zener impedance is derived by superimposing on 1ZT A 60Hz rms a.c. current equal to 10% of IZT. MILLIMETERS INCHES DIM MIN MAX MIN MAX G1 REF. REF. MIN. MIN. FIGURE 1 DESIGN DATA

PDF Datasheet Preview

• 1N4614UR-1 THRU 1N4627UR-1 AVAILABLE IN JAN, JANTX, JANTXV AND JANS

PER MIL-PRF-19500/435
• LEADLESS PACKAGE FOR SURFACE MOUNT
• LOW CURRENT OPERATION AT 250 µA
• METALLURGICALLY BONDED
1N4614UR-1 thru
1N4627UR-1 and

CDLL4614 thru CDLL4627

MAXIMUM RATINGS

Operating Temperatures -65°C to +175°C DC Power Dissipation 500mW TEC = +125°C Power Derating 10 mW / °C above TEC = +125°C Forward Voltage 200 mA Volts maximum

ELECTRICAL CHARACTERISTICS 25°C, unless otherwise

CDI TYPE NUMBER

CDLL4614 CDLL4615 CDLL4616 CDLL4617 CDLL4618 CDLL4619 CDLL4620 CDLL4621 CDLL4622 CDLL4623 CDLL4624 CDLL4625 CDLL4626 CDLL4627

NOMINAL ZENER

VOLTAGE V

Note 1

VOLTS

ZENER TEST CURRENT
µA 250

MAXIMUM ZENER

IMPEDANCE Z ZT

Note 2

OHMS
1200 1250
1300 1400
1500 1600
1650 1700
1650 1600
1550 1500
1400 1200

VOLTS

MAXIMUM DC ZENER CURRENT
mA 120 110 100 95 90 87 85 83 80 77 75 70 65 61

NOTE 1 NOTE 2

The CDI type numbers shown above have a Zener voltage tolerance of Nominal Zener voltage is measured with the device junction in thermal equilibrium at an ambient temperature of 25°C + 3°C. "C" suffix denotes a + 2% tolerance and "D" suffix denotes a + 1% tolerance.

Zener impedance is derived by superimposing on 1ZT A 60Hz rms a.c. current equal to 10% of IZT.

MILLIMETERS INCHES

DIM MIN MAX MIN MAX

G1 REF. REF.

MIN. MIN.

FIGURE 1

DESIGN DATA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CDLL4614 Datasheet file may be downloaded here without warranties.

Datasheet ID: CDLL4614 648558