090-00218-006

090-00218-006 Datasheet

Part number 090-00218-001

Part	Datasheet
090-00218-006	090-00218-006 (pdf)

Related Parts	Information
090-00218-004	090-00218-004
090-00218-001	090-00218-001
090-00218-002	090-00218-002
090-00218-003	090-00218-003

PDF Datasheet Preview
Quantum SA.45s CSAC Chip Scale Atomic Clock DATASHEET Key Features • Power consumption <120 mW • Less than 17 cc volume, x • 10 MHz CMOS-compatible output • 1 PPS output and 1 PPS input for synchronization • RS-232 interface for monitoring and control • Short term stability Allan Deviation of TAU =1 sec Applications* • Underwater sensor systems • GPS receivers • Backpack radios • Anti-IED jamming systems • Autonomous sensor networks • Unmanned vehicles *The Chip Scale Atomic Clock is not tested, qualified, and rated for space applications. With an extremely low power consumption of <120 mW and a volume of <17 cc, the SA.45s Chip Scale Atomic Clock CSAC brings the accuracy and stability of an atomic clock to portable applications for the first time. The SA.45s provides 10 MHz and 1 PPS outputs at standard CMOS levels, with short-term stability Allan Deviation of 2.5E-10 TAU =1 sec, long-term aging of <9E-10/month, and maximum frequency change of 5E-10 over an operating temperature range of -10°C to +35°C. The SA.45s CSAC accepts a 1 PPS input that may be used to synchronize the unit’s 1 PPS output to an external reference clock with ±100 ns accuracy. The CSAC can also use the 1 PPS input to discipline its phase and frequency to within 1 ns and 1.0E-12, respectively. A standard CMOS-level RS-232 serial interface is built in to the SA.45s. This is used to control and calibrate the unit and also to provide a comprehensive set of status monitors. The interface is also used to set and read the CSAC’s internal timeof-day clock. Microsemi invented portable atomic timekeeping with QUANTUM , the first family of miniature and chip scale atomic clocks. Choose QUANTUM class for best-in-class stability, Size, Weight and Power consumption SWAP . Page 1 of 7 Quantum SA.45s CSAC Options to Meet a Wider Range of Applications The standard SA.45s CSAC option 001 provides an output frequency of 10MHz. However, other output frequencies are available option 003 provides MHz, and option 004 provides MHz and option 006 provides a 5 MHz output. For other output frequencies please contact Microsemi for details. The Chip Scale Atomic Clock is not tested, qualified, and rated for space applications. Mechanical Interface DATASHEET PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12 I.D. Tune N/A N/A BITE Tx Rx Vcc GND 1 PPS IN 1 PPS OUT N/A 10 MHz OUT Bottom View Page 2 of 7 Quantum SA.45s CSAC Option 001 Part number 090-00218-001 Specifications All specifications at 25°C, Vcc =3.3V DC unless otherwise specified ELECTRICAL SPECIFICATIONS RF Output - Frequency: 10 MHz - Format: CMOS - Amplitude: 0V to Vcc - Load impedance:

PDF Datasheet Preview

Quantum SA.45s CSAC

Chip Scale Atomic Clock

DATASHEET

Key Features
• Power consumption <120 mW
• Less than 17 cc volume, x
• 10 MHz CMOS-compatible output
• 1 PPS output and 1 PPS input for
synchronization
• RS-232 interface for monitoring and
control
• Short term stability Allan Deviation of

TAU =1 sec

Applications*
• Underwater sensor systems
• GPS receivers
• Backpack radios
• Anti-IED jamming systems
• Autonomous sensor networks
• Unmanned vehicles
*The Chip Scale Atomic Clock is not tested, qualified, and rated for space applications.

With an extremely low power consumption of <120 mW and a volume of <17 cc, the SA.45s Chip Scale Atomic Clock CSAC brings the accuracy and stability of an atomic clock to portable applications for the first time.

The SA.45s provides 10 MHz and 1 PPS outputs at standard CMOS levels, with short-term stability Allan Deviation of 2.5E-10 TAU =1 sec, long-term aging of <9E-10/month, and maximum frequency change of 5E-10 over an operating temperature range of -10°C to +35°C.

The SA.45s CSAC accepts a 1 PPS input that may be used to synchronize the unit’s 1 PPS output to an external reference clock with ±100 ns accuracy. The CSAC can also use the 1 PPS input to discipline its phase and frequency to within 1 ns and 1.0E-12, respectively.

A standard CMOS-level RS-232 serial interface is built in to the SA.45s. This is used to control and calibrate the unit and also to provide a comprehensive set of status monitors. The interface is also used to set and read the CSAC’s internal timeof-day clock.

Microsemi invented portable atomic timekeeping with QUANTUM , the first family of miniature and chip scale atomic clocks.

Choose QUANTUM class for best-in-class stability, Size, Weight and Power consumption SWAP .

Page 1 of 7

Quantum SA.45s CSAC

Options to Meet a Wider Range of Applications The standard SA.45s CSAC option 001 provides an output frequency of 10MHz. However, other output frequencies are available option 003 provides MHz, and option 004 provides MHz and option 006 provides a 5 MHz output.

For other output frequencies please contact Microsemi for details.

The Chip Scale Atomic Clock is not tested, qualified, and rated for space applications.

Mechanical Interface

DATASHEET

PIN NO. 1 2 3 4 5 6 7 8 9 10 11 12

I.D. Tune N/A N/A BITE Tx Rx Vcc GND 1 PPS IN 1 PPS OUT N/A 10 MHz OUT

Bottom View

Page 2 of 7

Quantum SA.45s CSAC Option 001

Part number 090-00218-001

Specifications

All specifications at 25°C, Vcc =3.3V DC unless otherwise specified

ELECTRICAL SPECIFICATIONS

RF Output
- Frequency:
10 MHz
- Format:

CMOS
- Amplitude:
0V to Vcc
- Load impedance:

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 090-00218-006 Datasheet file may be downloaded here without warranties.

Datasheet ID: 090-00218-006 648179