LX8816-04CDF

LX8816-04CDF Datasheet

LX8816

Part	Datasheet
LX8816-04CDF	LX8816-04CDF (pdf)

PDF Datasheet Preview
LX8816 Dual Channel 1A Low Dropout Regulator PRODUCTION DATA SHEET .COM The LX8816 is a dual channel enabling precise output voltages, positive-voltage linear regulator. This typically ±1% of it’s specified value, dual regulator has one fixed output while the BiPolar output transistor has a coupled with an adjustable output. low dropout voltage even at full output Each channel features low-dropout current VDO < 1.2V typ. 1A . and high accuracy. Thermal and Short Circuit Current The LX8816 provides designers Protection are integrated on-chip and with a flexible power management operate independently for each regulator solution, minimal printed circuit board output. area and shorter design cycles. The LX8816 regulator is stable with a Each channel can supply up to one low-value output capacitor, typically amp independently with a regulator 2.2µF on the outputs, allowing designers design optimized for system efficiency flexibility in external component by consuming minimal ground current selection. and directing quiescent current to the Microsemi’s-PAK package enables load. maximum power dissipation and ease of The LX8816 features on-chip assembly using surface mount trimming of the internal voltage technology. IMPORTANT For the most current data, consult MICROSEMI’s website: KEY FEATURES Two Independent Regulated Outputs Accurate Output Voltages Typical Dropout of 1.2V at 1A and 1.1V at 500mA Independent Thermal and Current Limit Protection Low Profile 5 Lead SMT Power Package Low Tolerance Load Regulation Wide DC Supply Voltage of 4.3V to 10V Loop Stability Independent of Output Capacitor Type APPLICATIONS/BENEFITS 5V to 3.3V / ADJ Regulators Hard Disk Drives, CD-ROMs ADSL and Cable Modems Battery Charging Circuits Instrumentation PC Peripherals APPLICATION CIRCUITS VIN = 5V 22µF LX8816-04

PDF Datasheet Preview

LX8816

Dual Channel 1A Low Dropout Regulator

PRODUCTION DATA SHEET
.COM

The LX8816 is a dual channel enabling precise output voltages,
positive-voltage linear regulator. This typically ±1% of it’s specified value,
dual regulator has one fixed output while the BiPolar output transistor has a
coupled with an adjustable output. low dropout voltage even at full output

Each channel features low-dropout current VDO < 1.2V typ. 1A .
and high accuracy.

Thermal and Short Circuit Current

The LX8816 provides designers Protection are integrated on-chip and
with a flexible power management operate independently for each regulator
solution, minimal printed circuit board output.
area and shorter design cycles.

The LX8816 regulator is stable with a

Each channel can supply up to one low-value output capacitor, typically
amp independently with a regulator 2.2µF on the outputs, allowing designers
design optimized for system efficiency flexibility in external component
by consuming minimal ground current selection.
and directing quiescent current to the Microsemi’s-PAK package enables
load.
maximum power dissipation and ease of

The LX8816 features on-chip assembly using surface mount
trimming of the internal voltage
technology.

IMPORTANT For the most current data, consult MICROSEMI’s website:

KEY FEATURES

Two Independent Regulated Outputs

Accurate Output Voltages Typical Dropout of 1.2V at 1A
and 1.1V at 500mA Independent Thermal and

Current Limit Protection Low Profile 5 Lead SMT Power

Package Low Tolerance Load Regulation Wide DC Supply Voltage of 4.3V
to 10V Loop Stability Independent of

Output Capacitor Type

APPLICATIONS/BENEFITS
5V to 3.3V / ADJ Regulators Hard Disk Drives, CD-ROMs ADSL and Cable Modems Battery Charging Circuits Instrumentation PC Peripherals

APPLICATION CIRCUITS

VIN = 5V
22µF

LX8816-04

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LX8816-04CDF Datasheet file may be downloaded here without warranties.

Datasheet ID: LX8816-04CDF 648170