LX8386-00IDD

LX8386-00IDD Datasheet

LX8386-xx/8386A-xx/8386B-xx

Part	Datasheet
LX8386-00IDD	LX8386-00IDD (pdf)

Related Parts	Information
LX8386A-33CDD	LX8386A-33CDD
LX8386B-33CDD	LX8386B-33CDD
LX8386B-00CP	LX8386B-00CP
LX8386B-00CDD	LX8386B-00CDD
LX8386A-33CP	LX8386A-33CP
LX8386B-33CP	LX8386B-33CP
LX8386A-00CDD	LX8386A-00CDD
LX8386-33IP	LX8386-33IP
LX8386-33IDD	LX8386-33IDD
LX8386-33CP	LX8386-33CP
LX8386-33CDD	LX8386-33CDD
LX8386-00IP	LX8386-00IP
LX8386A-00CP	LX8386A-00CP
LX8386-00CP	LX8386-00CP
LX8386-00CDD	LX8386-00CDD

PDF Datasheet Preview
# 8386 LX8386-xx/8386A-xx/8386B-xx 1.5A LOW DROPOUT POSITIVE REGULATORS DATASHEET The LX8386/86A/86B series ICs are positive regulators designed to provide 1.5A output current. These regulators yield higher efficiency than currently available devices with all internal circuitry designed to operate down to a 1V input-to-output differential. In this product, the dropout voltage is fully specified as a function of load current. Dropout is guaranteed at a maximum of 1.3V LX8386A/86B and 1.5V LX8386 at maximum output current, decreasing at lower load currents. On-chip trimming adjusts the reference voltage to 1% for the 8386B initial accuracy and 2% 1% for the 8386B over line, load and temperature. The LX8386/86A/86B series devices are pin-compatible with earlier 3terminal regulators, such as 117 series products. While a 10µF output capacitor is required on both input and output of these new devices, this capacitor is generally included in most regulator designs. The LX8386/86A/86B series quiescent current flows into the load, increasing efficiency. This feature contrasts with PNP regulators, where up to 10% of the output current is wasted as quiescent current. The LX8386-xxI is specified over the full industrial temperature range of -25°C to +125°C and the LX8386/86A/86B-xxC is specified over the commercial range of 0°C to +125°C. NOTE For current data & package dimensions, visit our web site: PRODUCT HIGHLIGHT 3.3V, 1.5A RE G U L AT O R 1500µF 6MV1500GX LX8386 3.3V at 1.5A 1500µF, 6.3V 6MV1500GX from Sanyo KEY FEATURES s Three-Terminal Adjustable or Fixed Output s Guaranteed <1.3V Headroom at 1.5A LX8386A/86B s Output Current of 1.5A Minimum s Operates Down to 1V Dropout p Line Regulation p Load Regulation s Evaluation Board Available: Request LXE9001 EVALUATION KIT A P L I C AT I O N S s High Efficiency Linear Regulators s Post Regulators For Switching Power Supplies s Battery Chargers s Constant Current Regulators s ASIC & Low Voltage IC Supplies s Memory Cards s Graphics & Sound Chipsets AVAILABLE O PTIONS PER PAR T # Part # Output Voltage LX8386/86A/86B-00 Adjustable LX8386/86A/86B-33 3.3V Other voltage options may be available Please contact factory for details. PACKAGE ORDER INFORMATION TA °C Max. Ref. Accuracy Max. Dropout Voltage Plastic 3-pin TO-220 Plastic 3-pin TO-263 Plastic T0-252 D-Pak 3-pin 1.5V LX8386-xxCP LX8386-xxCDD LX8386-xxCDT

PDF Datasheet Preview

# 8386

LX8386-xx/8386A-xx/8386B-xx
1.5A LOW DROPOUT POSITIVE REGULATORS DATASHEET

The LX8386/86A/86B series ICs are positive regulators designed to provide 1.5A output current. These regulators yield higher efficiency than currently available devices with all internal circuitry designed to operate down to a 1V input-to-output differential. In this product, the dropout voltage is fully specified as a function of load current. Dropout is guaranteed at a maximum of 1.3V LX8386A/86B and 1.5V LX8386 at maximum output current, decreasing at lower load currents. On-chip trimming adjusts the reference voltage to 1% for the 8386B initial accuracy and 2% 1% for the 8386B over line, load and temperature.

The LX8386/86A/86B series devices
are pin-compatible with earlier 3terminal regulators, such as 117 series products. While a 10µF output capacitor is required on both input and output of these new devices, this capacitor is generally included in most regulator designs.

The LX8386/86A/86B series quiescent current flows into the load, increasing efficiency. This feature contrasts with PNP regulators, where up to 10% of the output current is wasted as quiescent current. The LX8386-xxI is specified over the full industrial temperature range of -25°C to +125°C and the LX8386/86A/86B-xxC is specified over the commercial range of 0°C to +125°C.

NOTE For current data & package dimensions, visit our web site:

PRODUCT HIGHLIGHT
3.3V, 1.5A RE G U L AT O R
1500µF 6MV1500GX

LX8386
3.3V at 1.5A
1500µF, 6.3V 6MV1500GX from Sanyo

KEY FEATURES
s Three-Terminal Adjustable or Fixed Output
s Guaranteed <1.3V Headroom at 1.5A LX8386A/86B
s Output Current of 1.5A Minimum s Operates Down to 1V Dropout p Line Regulation p Load Regulation s Evaluation Board Available:

Request LXE9001 EVALUATION KIT

A P L I C AT I O N S
s High Efficiency Linear Regulators s Post Regulators For Switching Power

Supplies s Battery Chargers s Constant Current Regulators s ASIC & Low Voltage IC Supplies s Memory Cards s Graphics & Sound Chipsets

AVAILABLE O PTIONS PER PAR T #

Part #

Output Voltage

LX8386/86A/86B-00 Adjustable

LX8386/86A/86B-33
3.3V

Other voltage options may be available Please contact factory for details.

PACKAGE ORDER INFORMATION

TA °C

Max. Ref. Accuracy

Max. Dropout Voltage

Plastic 3-pin

TO-220

Plastic 3-pin

TO-263

Plastic T0-252 D-Pak 3-pin
1.5V

LX8386-xxCP

LX8386-xxCDD LX8386-xxCDT

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived LX8386-00IDD Datasheet file may be downloaded here without warranties.

Datasheet ID: LX8386-00IDD 648162