NP5Q128A13ESFC0E

NP5Q128A13ESFC0E Datasheet

Part Number NP5Q128A13ESFC0E NP5Q128AE3ESFC0E

Part	Datasheet
NP5Q128A13ESFC0E	NP5Q128A13ESFC0E (pdf)

PDF Datasheet Preview
P5Q Serial Phase Change Memory PCM 128Mb P5Q Serial PCM Features • SPI bus compatible serial interface • Maximum clock frequency 66 MHz 0°C to +70°C 33 MHz to +85°C • 2.7V to 3.6V single supply voltage • Supports legacy SPI protocol and new quad I/O or dual I/O SPI protocol • Quad I/O frequency of 50 MHz, resulting in an equivalent clock frequency up to 200 MHz • Dual I/O frequency of 66 MHz, resulting in an equivalent clock frequency up to 132 MHz • Continuous READ of entire memory via single instruction Quad and dual output fast read Quad and dual input fast program • Uniform 128Kb sectors Flash emulation • WRITE operations 128Kb sectors ERASE emulated Legacy Flash PAGE PROGRAM Bit-alterable page WRITEs PAGE PROGRAM on all 1s PRESET WRITEs • Write protections protected area size defined by four nonvolatile bits BP0, BP1, BP2, and BP3 • JEDEC-standard two-byte signature DA18h • 128Mb density with SOIC16 package • More than 1,000,000 WRITE cycles • Phase change memory PCM Chalcogenide phase change storage element Bit-alterable WRITE operation Micron Technology, Inc., reserves the right to change products or specifications without notice. 2005 Micron Technology, Inc. All rights reserved. Products and specifications discussed herein are subject to change by Micron without notice. 128Mb P5Q Serial PCM Table of Contents Table of Contents Features Functional Description Product Features Signal Names Signal Descriptions Serial Data Input D/DQ0 Serial Data Output Q/DQ1 Serial Clock C Chip Select S# Hold#/DQ3 . Write Protect W#/DQ2 VCC Supply Voltage VSS Ground SPI Modes Operating Features PAGE PROGRAM DUAL INPUT FAST PROGRAM QUAD INPUT FAST PROGRAM SECTOR ERASE and BULK ERASE Polling During a WRITE, PROGRAM, or ERASE Cycle Active Power and Standby Power Status Register. Protocol-Related Protections. Hold Condition Memory Organization Instructions WRITE ENABLE WREN . WRITE DISABLE WRDI . READ IDENTIFICATION RDID READ STATUS REGISTER RDSR WRITE STATUS REGISTER WRSR Read Data Bytes READ Data Bytes at Higher Speed FAST_READ DUAL OUTPUT FAST READ DOFR QUAD OUTPUT FAST READ QOFR PAGE PROGRAM PP DUAL INPUT FAST PROGRAM DIFP QUAD INPUT FAST PROGRAM QIFP SECTOR ERASE SE BULK ERASE BE Power-Up and Power-Down. Initial Delivery State Maximum Ratings DC and AC Characteristics Operating Conditions Endurance Specifications. AC Measurement Conditions Capacitance DC Characteristics AC Characteristics Package Dimensions Micron Technology, Inc., reserves the right to change products or specifications without notice. 2005 Micron Technology, Inc. All rights reserved. 128Mb P5Q Serial PCM Table of Contents Ordering Information. Micron Technology, Inc., reserves the right to change products or specifications without notice. 2005 Micron Technology, Inc. All rights reserved. 128Mb P5Q Serial PCM List of Figures List of Figures Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 Figure 11 Figure 12 Figure 13 Figure 14 Figure 15 Figure 16 Figure 17 Figure 18 Figure 19 Figure 20 Figure 21 Figure 22 Figure 23 Figure 24 Figure 25 Figure 26: Logic Diagram SO16 Connections Bus Master and Memory Devices on the SPI Bus SPI Modes Supported Hold Condition Activation WRITE ENABLE WREN Instruction Sequence. WRITE DISABLE WRDI Instruction Sequence READ IDENTIFICATION RDID Instruction Sequence and Data-Out Sequence READ STATUS REGISTER RDSR Instruction Sequence and Data-Out Sequence WRITE STATUS REGISTER WRSR Instruction Sequence READ DATA BYTES READ Instruction Sequence and Data-Out Sequence FAST_READ Instruction Sequence and Data-Out Sequence25 DUAL OUTPUT FAST READ Instruction Sequence QUAD OUTPUT FAST READ Instruction Sequence PP Instruction Sequence DIFP Instruction Sequence. QIFP Instruction Sequence. SE Instruction Sequence BE Instruction Sequence. Power-Up Timing AC Measurement I/O Waveform. Serial Input Timing. Write Protect Setup and Hold Timing During WRSR when SRWD = 1 Hold Timing Output Timing. SO16 Wide 16-Lead Plastic Small-Outline, 300 Mils Body Width, Package Outline Micron Technology, Inc., reserves the right to change products or specifications without notice. 2005 Micron Technology, Inc. All rights reserved. 128Mb P5Q Serial PCM List of Tables List of Tables Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8 Table 9 Table 10 Table 11 Table 12 Table 13 Table 14 Table 15 Table 16 Table 17 Table 18: Signal Names Sizes of Protected Areas. Memory Organization of Super Page Regions Instruction Set READ IDENTIFICATION RDID Data-Out Sequence Status Register Format. Protection Modes Power-Up Timing and VWI Threshold Absolute Maximum Ratings Operating Conditions Endurance Specifications AC Measurement Conditions. Capacitance1. DC Characteristics AC Characteristics SO16 wide - 16-Lead Plastic Small-Outline, 300 Mils Body Width, Mechanical Data Active Line Item Ordering Table Micron Technology, Inc., reserves the right to change products or specifications without notice. 2005 Micron Technology, Inc. All rights reserved. 128Mb P5Q Serial PCM Functional Description Functional Description Unlike other proposed alternative memories, P5Q serial PCM technology uses a conventional CMOS process with the addition of a few additional layers to form the memory storage element. Overall, the basic memory manufacturing process used to make PCM is less complex than that of NAND, NOR, or DRAM. P5Q serial PCM combines the benefits of traditional floating gate Flash, both NOR-type and NAND-type, with some of the key attributes of RAM and EEPROM. Like NOR Flash and RAM technology, PCM offers fast random access times. Like NAND Flash, PCM has the ability to write moderately fast, and like RAM and EEPROM, PCM supports bit-alterable WRITEs overwrite . Unlike Flash, no separate erase step is required to change information from 0 to 1 and 1 to Unlike RAM, however, the technology is nonvolatile with data retention compared with NOR Flash. Product Features P5Q serial PCM devices have 128Mb 16Mb x 8Mb SPI phase change memory with advanced write protection mechanisms, accessed by a high-speed, SPI-compatible bus. The memory can be programmed from 1 to 64 bytes at a time using the PAGE PROGRAM, DUAL INPUT FAST PROGRAM, and QUAD INPUT FAST PROGRAM instructions. It’s organized as 128 sectors that are further divided into 1024 pages each 131,072 total pages . For compatibility with Flash memory devices, P5Q serial PCM supports SECTOR ERASE 128Kb sector and BULK ERASE instructions. In addition to BULK ERASE instructions, P5Q serial PCM supports four high-performance dual and quad input/output instructions that double or quadruple the transfer bandwidth for READ and PROGRAM operations. • DUAL OUTPUT FAST READ DOFR instructions read data up to 66 MHz using both DQ0 and DQ1 pins as outputs. • QUAD OUTPUT FAST READ QOFR instructions read data up to 50 MHz using DQ0, DQ1, DQ2 W# , and DQ3 HOLD# pins as outputs. • DUAL INPUT FAST PROGRAM DIFP instructions program data up to 66 MHz using both DQ0 and DQ1 pins as inputs. • QUAD INPUT FAST PROGRAM QIFP instructions program data up to 50 MHz using DQ0, DQ1, DQ2 W# , and DQ3 HOLD# pins as inputs. Micron Technology, Inc., reserves the right to change products or specifications without notice. 2005 Micron Technology, Inc. All rights reserved. 128Mb P5Q Serial PCM Product Features Figure 1: PCM P5Q serial PCM can be write protected by software using a mix of volatile and nonvolatile protection features, depending on application needs. The protection granularity is 128Kb sector granularity . Logic Diagram HOLD# Figure 2 SO16 Connections HOLD#/DQ3 1 VCC 2 DU 3 DU 4 DU 5 DU 6 S# 7 DQ1 8 16 C 15 DQ0 14 DU 13 DU 12 DU 11 DU 10 VSS 9 W#/DQ2 DU = Do not use. User must float these pins. See “Package Dimensions” on page 40 for package dimensions and how to identify pins. For SO8 package solutions, contact your Micron representative. Micron Technology, Inc., reserves the right to change products or specifications without notice. 2005 Micron Technology, Inc. All rights reserved. 128Mb P5Q Serial PCM Signal Names Signal Names Table 1 Signal Names Signal Name C D DQ0 Q DQ1 S# W# DQ2 HOLD# DQ3 VCC VSS Standard x1 Mode Dual Mode Quad Mode Function Serial clock Serial data input Serial data output Chip select Write protect Hold Direction Input 128Mb P5Q Serial PCM Ordering Information Ordering Information Table 18 Active Line Item Ordering Table Part Number NP5Q128A13ESFC0E NP5Q128AE3ESFC0E 3V, SOIC, Pb-free,10.34 x 16-lead 0oC to 70oC 3V, SOIC, Pb-free,10.34 x 16-lead to 85 oC Notes For SO8 packaging solutions, contact your Micron representative for details. 8000 S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel 208-368-3900 Customer Comment Line 800-932-4992 Micron and the Micron logo are trademarks of Micron Technology, Inc. All other trademarks are the property of their respective owners. This data sheet contains minimum and maximum limits specified over the power supply and temperature range set forth herein. Although considered final, these specifications are subject to change, as further product development and data characterization sometimes occur. Micron Technology, Inc., reserves the right to change products or specifications without notice. 2005 Micron Technology, Inc. All rights reserved.

PDF Datasheet Preview

P5Q Serial Phase Change Memory PCM
128Mb P5Q Serial PCM Features
• SPI bus compatible serial interface
• Maximum clock frequency
66 MHz 0°C to +70°C 33 MHz to +85°C
• 2.7V to 3.6V single supply voltage
• Supports legacy SPI protocol and new quad I/O or dual I/O SPI protocol
• Quad I/O frequency of 50 MHz, resulting in an equivalent clock frequency up to 200 MHz
• Dual I/O frequency of 66 MHz, resulting in an equivalent clock frequency up to 132 MHz
• Continuous READ of entire memory via single instruction Quad and dual output fast read Quad and dual input fast program
• Uniform 128Kb sectors Flash emulation
• WRITE operations 128Kb sectors ERASE emulated Legacy Flash PAGE PROGRAM Bit-alterable page WRITEs PAGE PROGRAM on all 1s PRESET WRITEs
• Write protections protected area size defined by four nonvolatile bits BP0, BP1, BP2, and BP3
• JEDEC-standard two-byte signature DA18h
• 128Mb density with SOIC16 package
• More than 1,000,000 WRITE cycles
• Phase change memory PCM Chalcogenide phase change storage element Bit-alterable WRITE operation

Micron Technology, Inc., reserves the right to change products or specifications without notice. 2005 Micron Technology, Inc. All rights reserved.

Products and specifications discussed herein are subject to change by Micron without notice.
128Mb P5Q Serial PCM Table of Contents

Table of Contents

Features Functional Description Product Features Signal Names Signal Descriptions

Serial Data Input D/DQ0 Serial Data Output Q/DQ1 Serial Clock C Chip Select S# Hold#/DQ3 . Write Protect W#/DQ2 VCC Supply Voltage VSS Ground SPI Modes Operating Features PAGE PROGRAM DUAL INPUT FAST PROGRAM QUAD INPUT FAST PROGRAM SECTOR ERASE and BULK ERASE Polling During a WRITE, PROGRAM, or ERASE Cycle Active Power and Standby Power Status Register. Protocol-Related Protections. Hold Condition Memory Organization Instructions WRITE ENABLE WREN . WRITE DISABLE WRDI . READ IDENTIFICATION RDID READ STATUS REGISTER RDSR WRITE STATUS REGISTER WRSR Read Data Bytes READ Data Bytes at Higher Speed FAST_READ DUAL OUTPUT FAST READ DOFR QUAD OUTPUT FAST READ QOFR PAGE PROGRAM PP DUAL INPUT FAST PROGRAM DIFP QUAD INPUT FAST PROGRAM QIFP SECTOR ERASE SE BULK ERASE BE Power-Up and Power-Down. Initial Delivery State Maximum Ratings DC and AC Characteristics Operating Conditions Endurance Specifications. AC Measurement Conditions Capacitance DC Characteristics AC Characteristics Package Dimensions

Micron Technology, Inc., reserves the right to change products or specifications without notice. 2005 Micron Technology, Inc. All rights reserved.
128Mb P5Q Serial PCM Table of Contents
Ordering Information.

Micron Technology, Inc., reserves the right to change products or specifications without notice. 2005 Micron Technology, Inc. All rights reserved.
128Mb P5Q Serial PCM List of Figures

List of Figures

Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 Figure 11 Figure 12 Figure 13 Figure 14 Figure 15 Figure 16 Figure 17 Figure 18 Figure 19 Figure 20 Figure 21 Figure 22 Figure 23 Figure 24 Figure 25 Figure 26:

Logic Diagram SO16 Connections Bus Master and Memory Devices on the SPI Bus SPI Modes Supported Hold Condition Activation WRITE ENABLE WREN Instruction Sequence. WRITE DISABLE WRDI Instruction Sequence READ IDENTIFICATION RDID Instruction Sequence and Data-Out Sequence READ STATUS REGISTER RDSR Instruction Sequence and Data-Out Sequence WRITE STATUS REGISTER WRSR Instruction Sequence READ DATA BYTES READ Instruction Sequence and Data-Out Sequence FAST_READ Instruction Sequence and Data-Out Sequence25 DUAL OUTPUT FAST READ Instruction Sequence QUAD OUTPUT FAST READ Instruction Sequence PP Instruction Sequence DIFP Instruction Sequence. QIFP Instruction Sequence. SE Instruction Sequence BE Instruction Sequence. Power-Up Timing AC Measurement I/O Waveform. Serial Input Timing. Write Protect Setup and Hold Timing During WRSR when SRWD = 1 Hold Timing Output Timing. SO16 Wide 16-Lead Plastic Small-Outline, 300 Mils Body Width, Package Outline

Micron Technology, Inc., reserves the right to change products or specifications without notice. 2005 Micron Technology, Inc. All rights reserved.
128Mb P5Q Serial PCM List of Tables

List of Tables

Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8 Table 9 Table 10 Table 11 Table 12 Table 13 Table 14 Table 15 Table 16 Table 17 Table 18:
Signal Names Sizes of Protected Areas. Memory Organization of Super Page Regions Instruction Set READ IDENTIFICATION RDID Data-Out Sequence Status Register Format. Protection Modes Power-Up Timing and VWI Threshold Absolute Maximum Ratings Operating Conditions Endurance Specifications AC Measurement Conditions. Capacitance1. DC Characteristics AC Characteristics SO16 wide - 16-Lead Plastic Small-Outline, 300 Mils Body Width, Mechanical Data Active Line Item Ordering Table

Micron Technology, Inc., reserves the right to change products or specifications without notice. 2005 Micron Technology, Inc. All rights reserved.
128Mb P5Q Serial PCM Functional Description

Functional Description

Unlike other proposed alternative memories, P5Q serial PCM technology uses a conventional CMOS process with the addition of a few additional layers to form the memory storage element. Overall, the basic memory manufacturing process used to make PCM is less complex than that of NAND, NOR, or DRAM.

P5Q serial PCM combines the benefits of traditional floating gate Flash, both NOR-type and NAND-type, with some of the key attributes of RAM and EEPROM. Like NOR Flash and RAM technology, PCM offers fast random access times. Like NAND Flash, PCM has the ability to write moderately fast, and like RAM and EEPROM, PCM supports bit-alterable WRITEs overwrite . Unlike Flash, no separate erase step is required to change information from 0 to 1 and 1 to Unlike RAM, however, the technology is nonvolatile with data retention compared with NOR Flash.

Product Features

P5Q serial PCM devices have 128Mb 16Mb x 8Mb SPI phase change memory with advanced write protection mechanisms, accessed by a high-speed, SPI-compatible bus. The memory can be programmed from 1 to 64 bytes at a time using the PAGE PROGRAM, DUAL INPUT FAST PROGRAM, and QUAD INPUT FAST PROGRAM instructions. It’s organized as 128 sectors that are further divided into 1024 pages each 131,072 total pages . For compatibility with Flash memory devices, P5Q serial PCM supports SECTOR ERASE 128Kb sector and BULK ERASE instructions.

In addition to BULK ERASE instructions, P5Q serial PCM supports four high-performance dual and quad input/output instructions that double or quadruple the transfer bandwidth for READ and PROGRAM operations.
• DUAL OUTPUT FAST READ DOFR instructions read data up to 66 MHz using both

DQ0 and DQ1 pins as outputs.
• QUAD OUTPUT FAST READ QOFR instructions read data up to 50 MHz using DQ0,

DQ1, DQ2 W# , and DQ3 HOLD# pins as outputs.
• DUAL INPUT FAST PROGRAM DIFP instructions program data up to 66 MHz using
both DQ0 and DQ1 pins as inputs.
• QUAD INPUT FAST PROGRAM QIFP instructions program data up to 50 MHz using

DQ0, DQ1, DQ2 W# , and DQ3 HOLD# pins as inputs.

Micron Technology, Inc., reserves the right to change products or specifications without notice. 2005 Micron Technology, Inc. All rights reserved.
128Mb P5Q Serial PCM Product Features

Figure 1:

PCM P5Q serial PCM can be write protected by software using a mix of volatile and nonvolatile protection features, depending on application needs. The protection granularity is 128Kb sector granularity .

Logic Diagram

HOLD#

Figure 2 SO16 Connections

HOLD#/DQ3 1 VCC 2 DU 3 DU 4 DU 5 DU 6 S# 7 DQ1 8
16 C 15 DQ0 14 DU 13 DU 12 DU 11 DU 10 VSS
9 W#/DQ2

DU = Do not use. User must float these pins. See “Package Dimensions” on page 40 for package dimensions and how to identify pins. For SO8 package solutions, contact your Micron representative.

Micron Technology, Inc., reserves the right to change products or specifications without notice. 2005 Micron Technology, Inc. All rights reserved.
128Mb P5Q Serial PCM Signal Names

Signal Names

Table 1 Signal Names

Signal Name

C D DQ0

Q DQ1

S# W# DQ2 HOLD# DQ3 VCC VSS

Standard x1 Mode

Dual Mode

Quad Mode

Function

Serial clock Serial data
input Serial data
output Chip select Write protect

Hold

Direction Input
128Mb P5Q Serial PCM Ordering Information
Ordering Information
Table 18 Active Line Item Ordering Table

Part Number NP5Q128A13ESFC0E NP5Q128AE3ESFC0E
3V, SOIC, Pb-free,10.34 x 16-lead 0oC to 70oC 3V, SOIC, Pb-free,10.34 x 16-lead to 85 oC

Notes For SO8 packaging solutions, contact your Micron representative for details.
8000 S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel 208-368-3900 Customer Comment Line 800-932-4992 Micron and the Micron logo are trademarks of Micron Technology, Inc. All other trademarks are the property of their respective owners. This data sheet contains minimum and maximum limits specified over the power supply and temperature range set forth herein. Although considered final, these specifications are subject to change, as further product development and data characterization sometimes occur.

Micron Technology, Inc., reserves the right to change products or specifications without notice. 2005 Micron Technology, Inc. All rights reserved.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived NP5Q128A13ESFC0E Datasheet file may be downloaded here without warranties.

Datasheet ID: NP5Q128A13ESFC0E 648544