MTFDDAK256MAM-1K1

MTFDDAK256MAM-1K1 Datasheet

MTFDDAC128MAM-1Jx2, MTFDDAC256MAM-1Kx2, MTFDDAC512MAM-1Kx2, MTFDDAK128MAM-1Jx2, MTFDDAK256MAM-1Kx2, MTFDDAK512MAM-1Kx2

Part	Datasheet
MTFDDAK256MAM-1K1	MTFDDAK256MAM-1K1 (pdf)

Related Parts	Information
MTFDDAK128MAM-1J12	MTFDDAK128MAM-1J12
MTFDDAC128MAM-1J1	MTFDDAC128MAM-1J1
MTFDDAC256MAM-1K1	MTFDDAC256MAM-1K1
MTFDDAC512MAM-1K1	MTFDDAC512MAM-1K1
MTFDDAK128MAM-1J1	MTFDDAK128MAM-1J1
MTFDDAK256MAM-1K12	MTFDDAK256MAM-1K12
MTFDDAK512MAM-1K1	MTFDDAK512MAM-1K1
MTFDDAC256MAM-1K12	MTFDDAC256MAM-1K12
MTFDDAC128MAM-1J12	MTFDDAC128MAM-1J12

PDF Datasheet Preview
C400 2.5-Inch NAND Flash Self-Encrypting Drive SSD Features C400 2.5-Inch SATA NAND Flash SED SSD MTFDDAC128MAM-1Jx2, MTFDDAC256MAM-1Kx2, MTFDDAC512MAM-1Kx2, MTFDDAK128MAM-1Jx2, MTFDDAK256MAM-1Kx2, MTFDDAK512MAM-1Kx2 • 25nm MLC NAND Flash • RoHS-compliant package • SATA 6 Gb/s interface • TCG/Opal-compliant self-encrypting drive SED • FIPS-certified, hardware-based AES-256 encryption engine • ATA modes supported PIO mode 3, 4 Multiword DMA mode 0, 1, 2 Ultra DMA mode 0, 1, 2, 3, 4, 5 • Industry-standard, 512-byte sector size support • Hot-plug capable • Native command queuing support with 32-command slot support • ATA-8 ACS2 command set compliant • ATA security feature command set and password login support when TCG/Opal is not enabled • Secure erase data page command set fast and secure erase • TCG/Opal cryptographic erase, complete and secure in under 4 seconds • Self-monitoring, analysis, and reporting technology SMART command set • Performance1, 2 Sequential 128k READ up to 500 MB/s Sequential 128k WRITE up to 260 MB/s Random 4k READ up to 45,000 IOPS Random 4k WRITE up to 50,000 IOPS Vantage HDD test suite score up to 75,000 READ/WRITE latency 55µs TYP • Reliability MTBF million device hours3 Static and dynamic wear leveling Uncorrectable bit error rate UBER <1 sector per 1015 bits read • Low power consumption <280mW TYP4 • Endurance Total bytes written TBW 72TB • Capacity5 unformatted 128GB, 256GB, 512GB • Mechanical 9.5mm height SATA connector 5V ±10% 2.5-inch drive 100.5mm x 69.85mm x 9.5mm Weight 75g MAX • Mechanical 7.0mm height SATA connector 5V ±10% 2.5-inch drive 100.5mm x 69.85mm x 7.0mm Weight 73g MAX • Field-updateable firmware • Operating temperature Commercial 0°C to +70°C 6 Typical I/O performance numbers as measured using Iometer with a queue depth of 32 and write cache enabled. 4K transfers used for READ/WRITE latency values. The product achieves a mean time between failure MTBF based on population statistics not relevant to individual units. Active power measured during execution of 2007 with DIPM device-initiated power management enabled. 1GB = 1 billion bytes formatted capacity is less. Drive case temperature. Warranty Contact your Micron sales representative for further information regarding the product, including product warranties. Micron Technology, Inc. reserves the right to change products or specifications without notice. 2011 Micron Technology, Inc. All rights reserved. Products and specifications discussed herein are subject to change by Micron without notice. C400 2.5-Inch NAND Flash Self-Encrypting Drive SSD Features Part Numbering Information Micron’s RealSSD C400 SSD is available in different configurations and densities. Visit for a list of valid part numbers. Figure 1 Part Number Chart Micron Technology Product Family FD = Flash drive Drive Interface D = SATA Gb/s Drive Form Factor AC = 2.5-inch 9.5mm AK = 2.5-inch 7mm Drive Density 128 = 128GB 256 = 256GB 512 = 512GB NAND Flash Type M = MLC Product Family AM = C400 MT FD D AC xxx M AM - 1 K 1 x xx Production Status Blank = Production ES = Engineering sample Operating Temperature Range Blank = Commercial 0°C to +70°C Hardware Feature Set Blank = Null AA = Contact factory AB = Contact factory AC = Contact factory Security Feature Set Blank = Null 2 = Self-encrypting drive NAND Flash Component J = 32Gb, MLC, x8, 3.3V 25nm K = 64Gb, MLC, x8, 3.3V 25nm Sector Size 1 = 512-byte Micron Technology, Inc. reserves the right to change products or specifications without notice. 2011 Micron Technology, Inc. All rights reserved. C400 2.5-Inch NAND Flash Self-Encrypting Drive SSD General Description Micron’s RealSSD solid state drive SSD uses a single-chip controller with a SATA interface on the system side and n-channels of Micron NAND Flash internally. Packaged in an HDD replacement enclosure, the SSD integrates easily in existing storage infrastructures.

PDF Datasheet Preview

C400 2.5-Inch NAND Flash Self-Encrypting Drive SSD Features

C400 2.5-Inch SATA NAND Flash SED SSD

MTFDDAC128MAM-1Jx2, MTFDDAC256MAM-1Kx2, MTFDDAC512MAM-1Kx2, MTFDDAK128MAM-1Jx2, MTFDDAK256MAM-1Kx2, MTFDDAK512MAM-1Kx2
• 25nm MLC NAND Flash
• RoHS-compliant package
• SATA 6 Gb/s interface
• TCG/Opal-compliant self-encrypting drive SED
• FIPS-certified, hardware-based AES-256 encryption
engine
• ATA modes supported

PIO mode 3, 4 Multiword DMA mode 0, 1, 2 Ultra DMA mode 0, 1, 2, 3, 4, 5
• Industry-standard, 512-byte sector size support
• Hot-plug capable
• Native command queuing support with 32-command slot support
• ATA-8 ACS2 command set compliant
• ATA security feature command set and password login support when TCG/Opal is not enabled
• Secure erase data page command set fast and secure erase
• TCG/Opal cryptographic erase, complete and secure in under 4 seconds
• Self-monitoring, analysis, and reporting technology SMART command set
• Performance1, 2 Sequential 128k READ up to 500 MB/s Sequential 128k WRITE up to 260 MB/s Random 4k READ up to 45,000 IOPS Random 4k WRITE up to 50,000 IOPS Vantage HDD test suite score up to
75,000 READ/WRITE latency 55µs TYP
• Reliability MTBF million device hours3 Static and dynamic wear leveling Uncorrectable bit error rate UBER <1 sector per 1015 bits read
• Low power consumption <280mW TYP4
• Endurance Total bytes written TBW 72TB
• Capacity5 unformatted 128GB, 256GB, 512GB
• Mechanical 9.5mm height

SATA connector 5V ±10% 2.5-inch drive 100.5mm x 69.85mm x 9.5mm Weight 75g MAX
• Mechanical 7.0mm height SATA connector 5V ±10% 2.5-inch drive 100.5mm x 69.85mm x 7.0mm Weight 73g MAX
• Field-updateable firmware
• Operating temperature Commercial 0°C to +70°C 6

Typical I/O performance numbers as measured using Iometer with a queue depth of 32 and write cache enabled.
4K transfers used for READ/WRITE latency values.

The product achieves a mean time between failure MTBF based on population statistics not relevant to individual units.

Active power measured during execution of 2007 with DIPM device-initiated power management enabled.
1GB = 1 billion bytes formatted capacity is less.

Drive case temperature.

Warranty Contact your Micron sales representative for further information regarding the product, including product warranties.

Micron Technology, Inc. reserves the right to change products or specifications without notice. 2011 Micron Technology, Inc. All rights reserved.

Products and specifications discussed herein are subject to change by Micron without notice.

C400 2.5-Inch NAND Flash Self-Encrypting Drive SSD Features

Part Numbering Information

Micron’s RealSSD C400 SSD is available in different configurations and densities. Visit for a list of valid part numbers.

Figure 1 Part Number Chart

Micron Technology

Product Family FD = Flash drive

Drive Interface D = SATA Gb/s

Drive Form Factor AC = 2.5-inch 9.5mm AK = 2.5-inch 7mm

Drive Density 128 = 128GB 256 = 256GB 512 = 512GB

NAND Flash Type M = MLC

Product Family AM = C400

MT FD D AC xxx M AM - 1 K 1 x xx

Production Status Blank = Production ES = Engineering sample

Operating Temperature Range Blank = Commercial 0°C to +70°C

Hardware Feature Set Blank = Null AA = Contact factory AB = Contact factory AC = Contact factory

Security Feature Set Blank = Null 2 = Self-encrypting drive

NAND Flash Component J = 32Gb, MLC, x8, 3.3V 25nm K = 64Gb, MLC, x8, 3.3V 25nm

Sector Size 1 = 512-byte

Micron Technology, Inc. reserves the right to change products or specifications without notice. 2011 Micron Technology, Inc. All rights reserved.

C400 2.5-Inch NAND Flash Self-Encrypting Drive SSD General Description

Micron’s RealSSD solid state drive SSD uses a single-chip controller with a SATA interface on the system side and n-channels of Micron NAND Flash internally. Packaged in an HDD replacement enclosure, the SSD integrates easily in existing storage infrastructures.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MTFDDAK256MAM-1K1 Datasheet file may be downloaded here without warranties.

Datasheet ID: MTFDDAK256MAM-1K1 648524