M29W320DB70ZE6F TR

M29W320DB70ZE6F TR Datasheet

M29W320DT M29W320DB

Part	Datasheet
M29W320DB70ZE6F TR	M29W320DB70ZE6F TR (pdf)

Related Parts	Information
M29W320DB90N6	M29W320DB90N6
M29W320DT70N6F TR	M29W320DT70N6F TR
M29W320DT70ZE6E	M29W320DT70ZE6E
M29W320DT70ZE6F TR	M29W320DT70ZE6F TR
M29W320DT90N6	M29W320DT90N6
M29W320DB70ZE6E	M29W320DB70ZE6E
M29W320DT70N6E	M29W320DT70N6E
M29W320DB70ZA6	M29W320DB70ZA6
M29W320DB70N6	M29W320DB70N6
M29W320DT70N3F TR	M29W320DT70N3F TR
M29W320DB70N3F TR	M29W320DB70N3F TR
M29W320DB80ZA3F TR	M29W320DB80ZA3F TR
M29W320DB7AZA6F TR	M29W320DB7AZA6F TR
M29W320DB7AN6F TR	M29W320DB7AN6F TR

PDF Datasheet Preview
M29W320DT M29W320DB 32 Mbit 4Mbx8 or 2Mbx16, Non-uniform Parameter Blocks, Boot Block , 3V Supply Flash memory Feature summary - Supply Voltage VCC = 2.7V to 3.6V for Program, Erase and Read VPP =12V for Fast Program optional - Access time 70, 80, and 90 ns - Programming time 10µs per Byte/Word typical - 67 memory blocks 1 Boot Block Top or Bottom Location 2 Parameter and 64 Main Blocks - Program/Erase controller Embedded Byte/Word Program algorithms - Erase Suspend and Resume modes Read and Program another Block during Erase Suspend - Unlock Bypass Program command Faster Production/Batch Programming - VPP/WP pin for Fast Program and Write Protect - Temporary Block Unprotection mode - Common Flash Interface 64 bit Security code - Low power consumption Standby and Automatic Standby - 100,000 Program/Erase cycles per block - Electronic Signature Manufacturer Code 0020h Top Device Code M29W320DT 22CAh Bottom Device Code M29W320DB 22CBh - RoHS packages available - Automotive Grade Parts Available TSOP48 N 12 x 20mm FBGA TFBGA48 ZE February 2010 1/56 Contents Contents M29W320DT, M29W320DB Summary description 6 Signal descriptions 12 Address Inputs A0-A20 12 Data Inputs/Outputs DQ0-DQ7 12 Data Inputs/Outputs DQ8-DQ14 12 Data Input/Output or Address Input 12 Chip Enable E 12 Output Enable G 12 Write Enable W 13 VPP/Write Protect VPP/WP 13 Reset/Block Temporary Unprotect RP 13 Ready/Busy Output RB 14 Byte/Word Organization Select BYTE 14 VCC Supply Voltage 14 VSS Ground 14 Bus operations 15 Bus Read 15 Bus Write 15 Output Disable 15 Standby 15 Automatic Standby 15 Special bus operations 16 Electronic Signature 16 4/56 M29W320DT, M29W320DB List of figures List of figures Figure Logic Diagram. 7 TSOP Connections 8 TFBGA48 Connections Top view through package 9 Block Addresses x8 10 Block Addresses x16 11 Data Polling Flowchart 27 Data Toggle Flowchart 28 AC Measurement I/O Waveform. 30 Read Mode AC Waveforms 33 Write AC Waveforms, Write Enable Controlled 34 Write AC Waveforms, Chip Enable Controlled 35 Reset/Block Temporary Unprotect AC Waveforms. 36 Accelerated Program Timing Waveforms 36 TSOP48 Lead Plastic Thin Small Outline, 12x20 Mm, Top View Package Outline 37 TFBGA48 6x8mm - 6x8 Ball Array, 0.8mm Pitch, Bottom View Package Outline 38 Programmer Equipment Block Protect Flowchart 50 Programmer Equipment Chip Unprotect Flowchart 51 In-System Equipment Block Protect Flowchart. 52 In-System Equipment Chip Unprotect Flowchart 53 5/56 Summary description Summary description M29W320DT, M29W320DB The M29W320D is a 32 Mbit 4Mb x8 or 2Mb x16 non-volatile memory that can be read, erased and reprogrammed. These operations can be performed using a single low voltage to 3.6V supply. On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM. The memory is divided into blocks that can be erased independently so it is possible to preserve valid data while old data is erased. Each block can be protected independently to prevent accidental Program or Erase commands from modifying the memory. Program and Erase commands are written to the Command Interface of the memory. An on-chip Program/Erase Controller simplifies the process of programming or erasing the memory by taking care of all of the special operations that are required to update the memory contents. The end of a program or erase operation can be detected and any error conditions identified. The command set required to control the memory is consistent with JEDEC standards. The blocks in the memory are asymmetrically arranged, see Figure 4 and Figure 5, Table 19 and Table The first or last 64 Kbytes have been divided into four additional blocks. The 16 Kbyte Boot Block can be used for small initialization code to start the microprocessor, the two 8 Kbyte Parameter Blocks can be used for parameter storage and the remaining 32 Kbyte is a small Main Block where the application may be stored. Chip Enable, Output Enable and Write Enable signals control the bus operation of the memory. They allow simple connection to most microprocessors, often without additional logic. The memory is offered in TSOP48 12 x 20mm , and TFBGA48 6x8mm, 0.8mm pitch packages. In order to meet environmental requirements, Numonyx offers the M29W320D in packages. ECOPACK packages are Lead-free. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. The memory is supplied with all the bits erased set to 6/56 M29W320DT, M29W320DB Figure Logic Diagram VCC VPP/WP Summary description 21 A0-A20 15 DQ0-DQ14 W E G RP BYTE M29W320DT M29W320DB AI90189B Table Signal Names A0-A20 Address Inputs DQ0-DQ7 Data Inputs/Outputs DQ8-DQ14 Data Inputs/Outputs Data Input/Output or Address Input Chip Enable Output Enable Write Enable Reset/Block Temporary Unprotect Ready/Busy Output BYTE Byte/Word Organization Select VCC VPP/WP VSS NC Table Ordering Information Scheme Example: M29W320DB Device Type Operating Voltage W = VCC = to 3.6V Device Function 320D = 32 Mbit x8/x16 , Non-Uniform Parameter Blocks, Boot Block Array Matrix T = Top Boot B = Bottom Boot Speed 7A = 70 ns device speed in conjuction with temperature range = 6 denotes Auto Grade °C to 85 °C parts 70 = 70 ns device speed in conjuction with temperature range = 6 denotes Industrial Grade °C to 85 °C parts temperature range = 3 denotes Auto Grade °C to 125 °C parts 80 = 80 ns device speed in conjuction with temperature range = 3 denotes Automotive Grade °C to 125 °C parts with extended VCC range min V 90 = 90 ns device speed in conjuction with temperature range = 6 denotes Industrial Grade °C to 85 °C parts Package N = TSOP48 12 x 20 mm ZE = TFBGA48 6 x 8mm, 0.8mm pitch ZA = TFBGA48 6 x 8mm, 0.8mm pitch Temperature Range 6 = Temperature range, to 85 °C 3 = Automotive temperature range, to 125 °C Option Blank = Standard Packing T = Tape & Reel Packing E = RoHS Package, Standard Packing F = RoHS Package, Tape & Reel Packing 7A N 6 E Devices are shipped from the factory with the memory content bits erased to For a list of available options Speed, Package, etc... or for further information on any aspect of this device, please contact the Numonyx Sales Office nearest to you. 39/56 Block Addresses Appendix A Block Addresses M29W320DT, M29W320DB Table Top Boot Block Addresses, M29W320DT Size # KByte/KWor Address Range x8 16/8 3FA000h-3FBFFFh 3F8000h-3F9FFFh 32/16 3F0000h-3F7FFFh Lead-free package options E and F added to Table 18 Ordering Information Scheme. TFBGA48 package added throughout document. 54/56 M29W320DT, M29W320DB Changes 13-Jun-2006 Document title modified. TFBGA63 package removed. ECOPACK text added. RB signal updated in Figure 12 Reset/Block Temporary Unprotect AC Waveforms. tPLYH updated in Table 15 Reset/Block Temporary Unprotect AC Characteristics. In Table 7 Status Register Bits, DQ7 changed to DQ7 for Program, Program during Erase Suspend and Program Error. 26-Mar-2008 Applied Numonyx branding. 27-May-2009 Added support for automotive grade as follows: Added automotive grade bullet to cover page; Added 7A column to Table Operating and AC Measurement Conditions and all AC Characteristics tables. Updated the order information table as follows: Added 7A, and other details to speed class options Added temperature range = 3 Automotive 22-Feb-2010 Added 80 ns device information to the following: cover page Ordering Information. Table Operating and AC Measurement Conditions Table Read AC Characteristics Table Write AC Characteristics, Write Enable Controlled Table Reset/Block Temporary Unprotect AC Characteristics In Table Operating and AC Measurement Conditions, changed the min voltage from to V for 70 ns device. 55/56 M29W320DT, M29W320DB Please Read Carefully INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH NUMONYX PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN NUMONYX'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NUMONYX ASSUMES NO LIABILITY WHATSOEVER, AND NUMONYX DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF NUMONYX PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Numonyx products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Numonyx may make changes to specifications and product descriptions at any time, without notice. Numonyx, B.V. may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Numonyx reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. Contact your local Numonyx sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an order number and are referenced in this document, or other Numonyx literature may be obtained by visiting Numonyx's website at Numonyx StrataFlash is a trademark or registered trademark of Numonyx or its subsidiaries in the United States and other countries. *Other names and brands may be claimed as the property of others. Copyright 2010, Numonyx, B.V., All Rights Reserved. 56/56

PDF Datasheet Preview

M29W320DT M29W320DB
32 Mbit 4Mbx8 or 2Mbx16, Non-uniform Parameter Blocks, Boot Block , 3V Supply Flash memory

Feature summary
- Supply Voltage VCC = 2.7V to 3.6V for Program, Erase and Read VPP =12V for Fast Program optional
- Access time 70, 80, and 90 ns - Programming time
10µs per Byte/Word typical - 67 memory blocks
1 Boot Block Top or Bottom Location 2 Parameter and 64 Main Blocks - Program/Erase controller Embedded Byte/Word Program algorithms - Erase Suspend and Resume modes Read and Program another Block during

Erase Suspend - Unlock Bypass Program command

Faster Production/Batch Programming - VPP/WP pin for Fast Program and Write Protect - Temporary Block Unprotection mode - Common Flash Interface
64 bit Security code - Low power consumption

Standby and Automatic Standby - 100,000 Program/Erase cycles per block - Electronic Signature

Manufacturer Code 0020h Top Device Code M29W320DT 22CAh Bottom Device Code M29W320DB 22CBh - RoHS packages available - Automotive Grade Parts Available

TSOP48 N 12 x 20mm

FBGA

TFBGA48 ZE

February 2010
1/56

Contents

Contents

M29W320DT, M29W320DB

Summary description 6

Signal descriptions 12

Address Inputs A0-A20 12

Data Inputs/Outputs DQ0-DQ7 12

Data Inputs/Outputs DQ8-DQ14 12

Data Input/Output or Address Input 12

Chip Enable E 12

Output Enable G 12

Write Enable W 13

VPP/Write Protect VPP/WP 13 Reset/Block Temporary Unprotect RP 13

Ready/Busy Output RB 14

Byte/Word Organization Select BYTE 14

VCC Supply Voltage 14 VSS Ground 14

Bus operations 15

Bus Read 15

Bus Write 15

Output Disable 15

Standby 15

Automatic Standby 15

Special bus operations 16

Electronic Signature 16
4/56

M29W320DT, M29W320DB

List of figures

List of figures

Figure

Logic Diagram. 7 TSOP Connections 8 TFBGA48 Connections Top view through package 9 Block Addresses x8 10 Block Addresses x16 11 Data Polling Flowchart 27 Data Toggle Flowchart 28 AC Measurement I/O Waveform. 30 Read Mode AC Waveforms 33 Write AC Waveforms, Write Enable Controlled 34 Write AC Waveforms, Chip Enable Controlled 35 Reset/Block Temporary Unprotect AC Waveforms. 36 Accelerated Program Timing Waveforms 36 TSOP48 Lead Plastic Thin Small Outline, 12x20 Mm, Top View Package Outline 37 TFBGA48 6x8mm - 6x8 Ball Array, 0.8mm Pitch, Bottom View Package Outline 38 Programmer Equipment Block Protect Flowchart 50 Programmer Equipment Chip Unprotect Flowchart 51 In-System Equipment Block Protect Flowchart. 52 In-System Equipment Chip Unprotect Flowchart 53
5/56

Summary description

Summary description

M29W320DT, M29W320DB

The M29W320D is a 32 Mbit 4Mb x8 or 2Mb x16 non-volatile memory that can be read, erased and reprogrammed. These operations can be performed using a single low voltage to 3.6V supply. On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM.

The memory is divided into blocks that can be erased independently so it is possible to preserve valid data while old data is erased. Each block can be protected independently to prevent accidental Program or Erase commands from modifying the memory. Program and Erase commands are written to the Command Interface of the memory. An on-chip Program/Erase Controller simplifies the process of programming or erasing the memory by taking care of all of the special operations that are required to update the memory contents. The end of a program or erase operation can be detected and any error conditions identified. The command set required to control the memory is consistent with JEDEC standards.

The blocks in the memory are asymmetrically arranged, see Figure 4 and Figure 5, Table 19 and Table The first or last 64 Kbytes have been divided into four additional blocks. The 16 Kbyte Boot Block can be used for small initialization code to start the microprocessor, the two 8 Kbyte Parameter Blocks can be used for parameter storage and the remaining 32 Kbyte is a small Main Block where the application may be stored.

Chip Enable, Output Enable and Write Enable signals control the bus operation of the memory. They allow simple connection to most microprocessors, often without additional logic.

The memory is offered in TSOP48 12 x 20mm , and TFBGA48 6x8mm, 0.8mm pitch packages. In order to meet environmental requirements, Numonyx offers the M29W320D in packages. ECOPACK packages are Lead-free. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label.

The memory is supplied with all the bits erased set to
6/56

M29W320DT, M29W320DB Figure Logic Diagram

VCC VPP/WP

Summary description
21 A0-A20
15 DQ0-DQ14

W E G RP BYTE

M29W320DT M29W320DB

AI90189B

Table Signal Names

A0-A20

Address Inputs

DQ0-DQ7

Data Inputs/Outputs

DQ8-DQ14

Data Inputs/Outputs

Data Input/Output or Address Input

Chip Enable

Output Enable

Write Enable

Reset/Block Temporary Unprotect

Ready/Busy Output

BYTE

Byte/Word Organization Select

VCC VPP/WP VSS NC
Table Ordering Information Scheme

Example:

M29W320DB

Device Type

Operating Voltage

W = VCC = to 3.6V Device Function
320D = 32 Mbit x8/x16 , Non-Uniform Parameter Blocks, Boot Block

Array Matrix

T = Top Boot

B = Bottom Boot

Speed
7A = 70 ns device speed in conjuction with temperature range = 6 denotes Auto Grade °C to 85 °C parts
70 = 70 ns device speed in conjuction with temperature range = 6 denotes Industrial Grade °C to 85 °C parts temperature range = 3 denotes Auto Grade °C to 125 °C parts
80 = 80 ns device speed in conjuction with temperature range = 3 denotes Automotive Grade °C to 125 °C parts with extended VCC range min V
90 = 90 ns device speed in conjuction with temperature range = 6 denotes Industrial Grade °C to 85 °C parts

Package

N = TSOP48 12 x 20 mm

ZE = TFBGA48 6 x 8mm, 0.8mm pitch

ZA = TFBGA48 6 x 8mm, 0.8mm pitch

Temperature Range
6 = Temperature range, to 85 °C
3 = Automotive temperature range, to 125 °C

Option

Blank = Standard Packing

T = Tape & Reel Packing

E = RoHS Package, Standard Packing

F = RoHS Package, Tape & Reel Packing
7A N 6 E

Devices are shipped from the factory with the memory content bits erased to

For a list of available options Speed, Package, etc... or for further information on any aspect of this device, please contact the Numonyx Sales Office nearest to you.
39/56

Block Addresses

Appendix A Block Addresses

M29W320DT, M29W320DB

Table Top Boot Block Addresses, M29W320DT

Size # KByte/KWor

Address Range x8
16/8
3FA000h-3FBFFFh 3F8000h-3F9FFFh
32/16
3F0000h-3F7FFFh
Lead-free package options E and F added to Table 18 Ordering

Information Scheme.

TFBGA48 package added throughout document.
54/56

M29W320DT, M29W320DB

Changes
13-Jun-2006

Document title modified.

TFBGA63 package removed. ECOPACK text added.

RB signal updated in Figure 12 Reset/Block Temporary Unprotect

AC Waveforms. tPLYH updated in Table 15 Reset/Block Temporary

Unprotect AC Characteristics.

In Table 7 Status Register Bits, DQ7 changed to DQ7 for Program, Program during Erase Suspend and Program Error.
26-Mar-2008

Applied Numonyx branding.
27-May-2009

Added support for automotive grade as follows:

Added automotive grade bullet to cover page;

Added 7A column to Table Operating and AC Measurement

Conditions and all AC Characteristics tables.

Updated the order information table as follows:

Added 7A, and other details to speed class options

Added temperature range = 3 Automotive
22-Feb-2010

Added 80 ns device information to the following:
cover page
Ordering Information.

Table Operating and AC Measurement Conditions

Table Read AC Characteristics

Table Write AC Characteristics, Write Enable Controlled

Table Reset/Block Temporary Unprotect AC Characteristics

In Table Operating and AC Measurement Conditions, changed the min voltage from to V for 70 ns device.
55/56

M29W320DT, M29W320DB

Please Read Carefully INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH NUMONYX PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN NUMONYX'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NUMONYX ASSUMES NO LIABILITY

WHATSOEVER, AND NUMONYX DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF NUMONYX PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

Numonyx products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.

Numonyx may make changes to specifications and product descriptions at any time, without notice. Numonyx, B.V. may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied,
by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Numonyx reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.

Contact your local Numonyx sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an order number and are referenced in this document, or other Numonyx literature may be obtained by
visiting Numonyx's website at Numonyx StrataFlash is a trademark or registered trademark of Numonyx or its subsidiaries in the United States and other countries.
*Other names and brands may be claimed as the property of others. Copyright 2010, Numonyx, B.V., All Rights Reserved.
56/56

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived M29W320DB70ZE6FTR Datasheet file may be downloaded here without warranties.

Datasheet ID: M29W320DB70ZE6FTR 648292