M25PX80-VMN6P

M25PX80-VMN6P Datasheet

M25PX80 Serial Flash Embedded Memory Features

Part	Datasheet
M25PX80-VMN6P	M25PX80-VMN6P (pdf)

Related Parts	Information
M25PX80-VMP6TG TR	M25PX80-VMP6TG TR
M25PX80-VMN6TP TR	M25PX80-VMN6TP TR
M25PX80-VMW6TG TR	M25PX80-VMW6TG TR
M25PX80-VMN6TPBA TR	M25PX80-VMN6TPBA TR
M25PX80-VMN3TPB TR	M25PX80-VMN3TPB TR
M25PX80-VMP6G	M25PX80-VMP6G

PDF Datasheet Preview
M25PX80 Serial Flash Embedded Memory Features M25PX80 NOR Serial Flash Embedded Memory 8Mb, Dual I/O, 4KB Subsector Erase, 3V Serial Flash Memory with 75 MHz SPI Bus Interface • SPI bus compatible serial interface • 75 MHz maximum clock frequency • 2.3V to 3.6V single supply voltage • Dual input/output instructions resulting in an equivalent clock frequency of 150MHz Dual output fast read instruction Dual input fast program instruction • 8Mb flash memory Uniform 4KB subsectors Uniform 64KB sectors • Additional 64-byte user-lockable, one-time programmable OTP area • Erase capability Subsector 4KB granularity Sector 64KB granularity Bulk erase 8Mb in 8 s TYP • Write protections Software write protection applicable to every 64KB sector volatile lock bit Hardware write protection protected area size defined by non-volatile bits BP0, BP1, BP2 • Deep power down 5µA TYP • Electronic signature JEDEC standard 2-byte signature 7114h Unique ID code UID with 16-byte read-only space, available upon request • More than 100,000 write cycles per sector • More than 20 years data retention • Packages RoHS compliant VFQFPN8 MP 6mm x 5mm SO8W MW 208mils SO8N MN 150mils • Automotive grade parts available Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved. Products and specifications discussed herein are subject to change by Micron without notice. M25PX80 Serial Flash Embedded Memory Features Contents Functional Description 6 Signal Descriptions 8 Serial Peripheral Interface Modes 9 Operating Features 11 Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved. M25PX80 Serial Flash Embedded Memory Features Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved. M25PX80 Serial Flash Embedded Memory Features List of Figures Figure 1 Logic Diagram 6 Figure 2 Pin Connections VFQFPN, SO8N 7 Figure 3 Bus Master and Memory Devices on the SPI Bus 10 Figure 4 SPI Modes 10 Figure 5 Hold Condition Activation 14 Figure 6 Block Diagram 15 Figure 7 WRITE ENABLE Command Sequence 19 Figure 8 WRITE DISABLE Command Sequence 20 Figure 9 READ ID Command Sequence 21 Figure 10 READ STATUS REGISTER Command Sequence 22 Figure 11 STATUS REGISTER Format 22 Figure 12 WRITE STATUS REGISTER Command Sequence 24 Figure 13 READ DATA BYTES Command Sequence 26 Figure 14 READ DATA BYTES AT HIGHER SPEED Command Sequence 27 Figure 15 DUAL OUTPUT FAST READ Command Sequence 28 Figure 16 READ LOCK REGISTER Command Sequence 29 Figure 17 READ OTP Command Sequence 30 Figure 18 PAGE PROGRAM Command Sequence 31 Figure 19 DUAL INPUT FAST PROGRAM Command Sequence 32 Figure 20 PROGRAM OTP Command Sequence 33 Figure 21 How to Permanently Lock the OTP Bytes 34 Figure 22 WRITE to LOCK REGISTER Instruction Sequence 35 Figure 23 SUBSECTOR ERASE Command Sequence 36 Figure 24 SECTOR ERASE Command Sequence 37 Figure 25 BULK ERASE Command Sequence 38 Figure 26 DEEP POWER-DOWN Command Sequence 39 Figure 27 RELEASE from DEEP POWER-DOWN Command Sequence 40 Figure 28 Power-Up Timing 42 Figure 29 AC Measurement I/O Waveform 45 Figure 30 Serial Input Timing 49 Figure 31 Write Protect Setup and Hold during WRSR when SRWD=1 Timing 49 Figure 32 Hold Timing 50 Figure 33 Output Timing 50 Figure 34 VPPH Timing 51 Figure 35 VFQFPN8 MLP8 6mm x 5mm 52 Figure 36 SO8W 208 mils Body Width 53 Figure 37 SO8N 150 mils Body Width 54 Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved. M25PX80 Serial Flash Embedded Memory Features List of Tables Table 1 Signal Descriptions 8 Table 2 SPI Modes 9 Table 3 Software Protection Truth Table 13 Table 4 Sectors 0 to 16, Protected Area Sizes Upper Area Protection 13 Table 5 Sectors 0 to 16, Protected Area Sizes Lower Area Protection 13 Table 6 Sectors 15:0 16 Table 7 Command Set Codes 18 Table 8 READ ID :Data Out Sequence 21 Table 9 Status Register Protection Modes 25 Table 10 Lock Register Out 29 Table 11 Lock Register In 35 Table 12 Absolute Maximum Ratings 43 Table 13 Operating Conditions 43 Table 14 Data Retention and Endurance 43 Table 15 Power Up Timing Specifications 44 Table 16 DC Current Specifications 44 Table 17 DC Voltage Specifications 44 Table 18 AC Measurement Conditions 45 Table 19 Capacitance 45 Table 20 AC Specifications 75MHz 46 Table 21 AC Specifications 50 MHz 47 Table 22 Part Number Information Scheme 55 Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved. M25PX80 Serial Flash Embedded Memory Functional Description Functional Description The M25PX80 is an 8Mb 1Mb x 8 serial Flash memory device, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The device supports two high-performance dual input/output commands that double the transfer bandwidth for read and program operations: • DUAL OUTPUT FAST READ command reads data at up to 75MHz by using both pin DQ1 and pin DQ0 as outputs. • DUAL INPUT FAST PROGRAM command programs data at up to 75MHz by using both pin DQ1 and pin DQ0 as inputs. Note 75MHz operation is available only in VCC range 2.7V to 3.6V. The memory can be programmed 1 to 256 bytes at a time, using the PAGE PROGRAM command. It is organized as 16 sectors that are each further divided into 16 subsectors 256 subsectors in total . The memory can be erased a 4Kb subsector at a time, a 64Kb sector at a time, or as a whole. It can be write protected by software using a mix of volatile and non-volatile protection features, depending on the application needs. The protection granularity is of 64Kb sector granularity . Further features are available as additional security options. More information on these security features is available, upon completion of an NDA nondisclosure agreement , and are, therefore, not described in this datasheet. For more details of this option contact your nearest Micron sales office. Figure 1 Logic Diagram DQ0 C S# W#/VPP HOLD# Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved. Signal Name C DQ0 S# W#/VPP HOLD# VCC VSS M25PX80 Serial Flash Embedded Memory Functional Description Function Serial clock Serial data input Serves as output during DUAL OUTPUT FAST READ operation Serial data output Serves as input during DUAL INPUT FAST PROGRAM operation Chip select Write protect or enhanced program supply voltage Hold Supply voltage Ground Direction Input I/O Input Figure 2 Pin Connections VFQFPN, SO8N W#/VPP HOLD# There is an exposed central pad on the underside of the VFQFPN package. This is pulled internally to VSS, and must not be connected to any other voltage or signal line on the PCB. The Package Mechanical section provides information on package dimensiions and how to identify pin Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved. Signal Descriptions M25PX80 Serial Flash Embedded Memory Signal Descriptions Table 1 Signal Descriptions Signal DQ1 DQ0 C S# HOLD# W#/VPP VCC VSS M25PX80 Serial Flash Embedded Memory Device Ordering Information Device Ordering Information Micron Serial NOR Flash devices are available in different configurations and densities. Valid part numbers are at Micron’s part catalog and feature and specification comparisons are at Contact your sales representative for devices not found. For more information on how to identify products and top-side marking by the process identification letter, refer to technical note TN-12-24, Serial Flash Memory Device Marking for the M25P, M25PE, M25PX, and N25Q Product Families. Table 22 Part Number Information Scheme Part Number Category Device type Density Security features Operating voltage Package Grade Plating technology Lithography Automotive grade Category Details M25PX = Serial Flash memory, 4KB and 64KB erasable sectors, dual I/O 80 = 8Mb 1Mb x 8-bit = No extra security SO = OTP configurable ST = OTP configurable plus protection at power-up S = CFD programmed with UID V = VCC = 2.3V to 3.6V automotive parts available only in 2.7V to 3.6V MP = VFQFPN 6mm x 5mm MLP8 MW = SO8W 208 mils width MN = SO8N 150 mils width 6 = Industrial temperature range to 85°C. Device tested with standard test flow option A is not selected . Device tested with high reliability certified test flow, if automotive grade option A is selected. 3 = Automotive temperature range to 125°C. Device tested with high reliability certified test flow. P or G = RoHS compliant G is not available for automotive commercial product B = 110nm, Fab 2 diffusion plant Automotive only Blank = 110nm A = Automotive to 85°C device grade Device tested with high reliability certified test flow. Blank = Automotive to 125°C Notes 1 Secure options available upon customer request. Micron strongly recommends the use of the Automotive Grade devices AutoGrade 6 and Grade 3 for use in an automotive environment. The High Reliability Certified Flow HRCF is described in the quality note QNEE9801. Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved. • Added tPP = 0.9ms for parts having date-code 346 or higher. • Initial Micron release with rebrand 8000 S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel 208-368-3900 Customer Comment Line 800-932-4992 Micron and the Micron logo are trademarks of Micron Technology, Inc. All other trademarks are the property of their respective owners. This data sheet contains minimum and maximum limits specified over the power supply and temperature range set forth herein. Although considered final, these specifications are subject to change, as further product development and data characterization some- times occur. Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved.

PDF Datasheet Preview

M25PX80 Serial Flash Embedded Memory Features

M25PX80 NOR Serial Flash Embedded Memory
8Mb, Dual I/O, 4KB Subsector Erase, 3V Serial Flash Memory with 75 MHz SPI Bus Interface
• SPI bus compatible serial interface
• 75 MHz maximum clock frequency
• 2.3V to 3.6V single supply voltage
• Dual input/output instructions resulting in an
equivalent clock frequency of 150MHz Dual output fast read instruction Dual input fast program instruction
• 8Mb flash memory Uniform 4KB subsectors Uniform 64KB sectors
• Additional 64-byte user-lockable, one-time programmable OTP area
• Erase capability Subsector 4KB granularity Sector 64KB granularity Bulk erase 8Mb in 8 s TYP
• Write protections Software write protection applicable to every 64KB sector volatile lock bit Hardware write protection protected area size defined by non-volatile bits BP0, BP1, BP2
• Deep power down 5µA TYP
• Electronic signature

JEDEC standard 2-byte signature 7114h Unique ID code UID with 16-byte read-only
space, available upon request
• More than 100,000 write cycles per sector
• More than 20 years data retention
• Packages RoHS compliant

VFQFPN8 MP 6mm x 5mm SO8W MW 208mils SO8N MN 150mils
• Automotive grade parts available

Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved.

Products and specifications discussed herein are subject to change by Micron without notice.

M25PX80 Serial Flash Embedded Memory Features

Contents

Functional Description 6 Signal Descriptions 8 Serial Peripheral Interface Modes 9 Operating Features 11
Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved.

M25PX80 Serial Flash Embedded Memory Features

Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved.

M25PX80 Serial Flash Embedded Memory Features

List of Figures

Figure 1 Logic Diagram 6 Figure 2 Pin Connections VFQFPN, SO8N 7 Figure 3 Bus Master and Memory Devices on the SPI Bus 10 Figure 4 SPI Modes 10 Figure 5 Hold Condition Activation 14 Figure 6 Block Diagram 15 Figure 7 WRITE ENABLE Command Sequence 19 Figure 8 WRITE DISABLE Command Sequence 20 Figure 9 READ ID Command Sequence 21 Figure 10 READ STATUS REGISTER Command Sequence 22 Figure 11 STATUS REGISTER Format 22 Figure 12 WRITE STATUS REGISTER Command Sequence 24 Figure 13 READ DATA BYTES Command Sequence 26 Figure 14 READ DATA BYTES AT HIGHER SPEED Command Sequence 27 Figure 15 DUAL OUTPUT FAST READ Command Sequence 28 Figure 16 READ LOCK REGISTER Command Sequence 29 Figure 17 READ OTP Command Sequence 30 Figure 18 PAGE PROGRAM Command Sequence 31 Figure 19 DUAL INPUT FAST PROGRAM Command Sequence 32 Figure 20 PROGRAM OTP Command Sequence 33 Figure 21 How to Permanently Lock the OTP Bytes 34 Figure 22 WRITE to LOCK REGISTER Instruction Sequence 35 Figure 23 SUBSECTOR ERASE Command Sequence 36 Figure 24 SECTOR ERASE Command Sequence 37 Figure 25 BULK ERASE Command Sequence 38 Figure 26 DEEP POWER-DOWN Command Sequence 39 Figure 27 RELEASE from DEEP POWER-DOWN Command Sequence 40 Figure 28 Power-Up Timing 42 Figure 29 AC Measurement I/O Waveform 45 Figure 30 Serial Input Timing 49 Figure 31 Write Protect Setup and Hold during WRSR when SRWD=1 Timing 49 Figure 32 Hold Timing 50 Figure 33 Output Timing 50 Figure 34 VPPH Timing 51 Figure 35 VFQFPN8 MLP8 6mm x 5mm 52 Figure 36 SO8W 208 mils Body Width 53 Figure 37 SO8N 150 mils Body Width 54

Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved.

M25PX80 Serial Flash Embedded Memory Features

List of Tables

Table 1 Signal Descriptions 8 Table 2 SPI Modes 9 Table 3 Software Protection Truth Table 13 Table 4 Sectors 0 to 16, Protected Area Sizes Upper Area Protection 13 Table 5 Sectors 0 to 16, Protected Area Sizes Lower Area Protection 13 Table 6 Sectors 15:0 16 Table 7 Command Set Codes 18 Table 8 READ ID :Data Out Sequence 21 Table 9 Status Register Protection Modes 25 Table 10 Lock Register Out 29 Table 11 Lock Register In 35 Table 12 Absolute Maximum Ratings 43 Table 13 Operating Conditions 43 Table 14 Data Retention and Endurance 43 Table 15 Power Up Timing Specifications 44 Table 16 DC Current Specifications 44 Table 17 DC Voltage Specifications 44 Table 18 AC Measurement Conditions 45 Table 19 Capacitance 45 Table 20 AC Specifications 75MHz 46 Table 21 AC Specifications 50 MHz 47 Table 22 Part Number Information Scheme 55

Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved.

M25PX80 Serial Flash Embedded Memory Functional Description

Functional Description

The M25PX80 is an 8Mb 1Mb x 8 serial Flash memory device, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The device supports two high-performance dual input/output commands that double the transfer bandwidth for read and program operations:
• DUAL OUTPUT FAST READ command reads data at up to 75MHz by using both pin DQ1 and pin DQ0 as outputs.
• DUAL INPUT FAST PROGRAM command programs data at up to 75MHz by using both pin DQ1 and pin DQ0 as inputs.

Note 75MHz operation is available only in VCC range 2.7V to 3.6V.

The memory can be programmed 1 to 256 bytes at a time, using the PAGE PROGRAM command. It is organized as 16 sectors that are each further divided into 16 subsectors 256 subsectors in total .

The memory can be erased a 4Kb subsector at a time, a 64Kb sector at a time, or as a whole. It can be write protected by software using a mix of volatile and non-volatile protection features, depending on the application needs. The protection granularity is of 64Kb sector granularity .

Further features are available as additional security options. More information on these security features is available, upon completion of an NDA nondisclosure agreement , and are, therefore, not described in this datasheet. For more details of this option contact your nearest Micron sales office.

Figure 1 Logic Diagram

DQ0 C S#

W#/VPP HOLD#

Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved.

Signal Name C DQ0

S# W#/VPP HOLD# VCC VSS

M25PX80 Serial Flash Embedded Memory Functional Description

Function Serial clock Serial data input Serves as output during DUAL OUTPUT FAST READ operation Serial data output Serves as input during DUAL INPUT FAST PROGRAM operation Chip select Write protect or enhanced program supply voltage Hold Supply voltage Ground

Direction Input I/O

Input

Figure 2 Pin Connections VFQFPN, SO8N

W#/VPP

HOLD#

There is an exposed central pad on the underside of the VFQFPN package. This is pulled internally to VSS, and must not be connected to any other voltage or signal line on the PCB. The Package Mechanical section provides information on package dimensiions and how to identify pin

Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved.

Signal Descriptions

M25PX80 Serial Flash Embedded Memory Signal Descriptions

Table 1 Signal Descriptions

Signal DQ1 DQ0 C S#

HOLD# W#/VPP

VCC VSS
M25PX80 Serial Flash Embedded Memory Device Ordering Information
Device Ordering Information

Micron Serial NOR Flash devices are available in different configurations and densities. Valid part numbers are at Micron’s part catalog and feature and specification comparisons are at Contact your sales representative for devices not found. For more information on how to identify products and top-side marking by the process identification letter, refer to technical note TN-12-24, Serial Flash Memory Device Marking for the M25P, M25PE, M25PX, and N25Q Product Families.

Table 22 Part Number Information Scheme

Part Number Category

Device type Density Security features

Operating voltage Package

Grade

Plating technology Lithography Automotive grade

Category Details M25PX = Serial Flash memory, 4KB and 64KB erasable sectors, dual I/O 80 = 8Mb 1Mb x 8-bit = No extra security SO = OTP configurable ST = OTP configurable plus protection at power-up S = CFD programmed with UID V = VCC = 2.3V to 3.6V automotive parts available only in 2.7V to 3.6V MP = VFQFPN 6mm x 5mm MLP8 MW = SO8W 208 mils width MN = SO8N 150 mils width 6 = Industrial temperature range to 85°C. Device tested with standard test flow option A is not selected . Device tested with high reliability certified test flow, if automotive grade option A is selected. 3 = Automotive temperature range to 125°C. Device tested with high reliability certified test flow. P or G = RoHS compliant G is not available for automotive commercial product B = 110nm, Fab 2 diffusion plant Automotive only Blank = 110nm A = Automotive to 85°C device grade Device tested with high reliability certified test flow. Blank = Automotive to 125°C

Notes 1

Secure options available upon customer request.

Micron strongly recommends the use of the Automotive Grade devices AutoGrade 6 and Grade 3 for use in an automotive environment. The High Reliability Certified Flow HRCF is described in the quality note QNEE9801.

Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved.
• Added tPP = 0.9ms for parts having date-code 346 or higher.
• Initial Micron release with rebrand
8000 S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel 208-368-3900 Customer Comment Line 800-932-4992

Micron and the Micron logo are trademarks of Micron Technology, Inc. All other trademarks are the property of their respective owners.

This data sheet contains minimum and maximum limits specified over the power supply and temperature range set forth herein. Although considered final, these specifications are subject to change, as further product development and data characterization some-
times occur.

Micron Technology, Inc. reserves the right to change products or specifications without notice. 2013 Micron Technology, Inc. All rights reserved.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived M25PX80-VMN6P Datasheet file may be downloaded here without warranties.

Datasheet ID: M25PX80-VMN6P 648287