TDGL025

TDGL025 Datasheet

Part Number TDGL025 - chipKIT Cmod Development Board

Part	Datasheet
TDGL025	TDGL025 (pdf)

PDF Datasheet Preview
Part Number TDGL025 - chipKIT Cmod Development Board The chipKIT Cmod is a development board in the chipKIT Platform line of tools from Digilent. It combines a PIC32MX150F128D microcontroller with a convenient 600-mil, 40-pin DIP package and two Digilent Pmod connectors. This Cmod board is ideally suited for breadboards or other prototype circuit designs where the use of small surface mount packages is impractical. This little board takes advantage of the powerful PIC32MX150F128D microcontroller. which features a 32-bit MIPS processor core running at 40 MHz, 128K of flash memory, and 32K of SRAM data memory. The board provides everything you need to start developing embedded applications using any of the chipKITcompatible IDEs, but in addition, the chipKIT Cmod is also fully compatible with Microchip's X IDE. Note, however, that to develop embedded applications using MPLAB X, a separate device programmer/debugger, such as the Digilent chipKIT PGM TDGL015 or the Microchip PICkit 3 Programmer PG164130 is required. Features: • PIC32MX1xx • 128KB Flash • 32KB RAM • 50 MHz operating speed • PPS, two SPI, two I2C, and two UART connectors • 13 channel 10-bit ADC • 33 available I/O pins • 3.3V operating voltage • 13 analog inputs • Two 12-pin Pmod connectors • Convenient 600-mil 2x20-pin DIP package • Two user LEDs • Programmable with MPIDE • Also programmable with MPLAB IDE with the addition of the PICkit 3 in-system programmer/debugger 3/2/2016

PDF Datasheet Preview

Part Number TDGL025 - chipKIT Cmod Development Board

The chipKIT Cmod is a development board in the chipKIT Platform line of tools from Digilent. It combines a PIC32MX150F128D microcontroller with a convenient 600-mil, 40-pin DIP package and two Digilent Pmod connectors. This Cmod board is ideally suited for breadboards or other prototype circuit designs where the use of small surface mount packages is impractical. This little board takes advantage of the powerful PIC32MX150F128D microcontroller. which features a 32-bit MIPS processor core running at 40 MHz, 128K of flash memory, and 32K of SRAM data memory.

The board provides everything you need to start developing embedded applications using any of the chipKITcompatible IDEs, but in addition, the chipKIT Cmod is also fully compatible with Microchip's X IDE. Note, however, that to develop embedded applications using MPLAB X, a separate device programmer/debugger, such as the Digilent chipKIT PGM TDGL015 or the Microchip PICkit 3 Programmer PG164130 is required.

Features:
• PIC32MX1xx
• 128KB Flash
• 32KB RAM
• 50 MHz operating speed
• PPS, two SPI, two I2C, and two UART connectors
• 13 channel 10-bit ADC
• 33 available I/O pins
• 3.3V operating voltage
• 13 analog inputs
• Two 12-pin Pmod connectors
• Convenient 600-mil 2x20-pin DIP package
• Two user LEDs
• Programmable with MPIDE
• Also programmable with MPLAB IDE with the addition of the PICkit 3 in-system
programmer/debugger
3/2/2016

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TDGL025 Datasheet file may be downloaded here without warranties.

Datasheet ID: TDGL025 648232