SST25VF016B-75-4I-S2AF-T

SST25VF016B-75-4I-S2AF-T Datasheet

SST25VF016B

Part	Datasheet
SST25VF016B-75-4I-S2AF-T	SST25VF016B-75-4I-S2AF-T (pdf)

Related Parts	Information
SST25VF016B-75-4I-QAF	SST25VF016B-75-4I-QAF
SST25VF016B-75-4I-S2AF	SST25VF016B-75-4I-S2AF
SST25VF016B-75-4I-QAF-T	SST25VF016B-75-4I-QAF-T

PDF Datasheet Preview
A Microchip Technology Company 16 Mbit SPI Serial Flash SST25VF016B Data Sheet SST's 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25VF016B devices are enhanced with improved operating frequency and lower power consumption. SST25VF016B SPI serial flash memories are manufactured with SST's proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. • Single Voltage Read and Write Operations 2.7-3.6V • Serial Interface Architecture SPI Compatible Mode 0 and Mode 3 • High Speed Clock Frequency Up to 80 MHz • Superior Reliability Endurance 100,000 Cycles typical Greater than 100 years Data Retention • Low Power Consumption Active Read Current 10 mA typical Standby Current 5 µA typical • Flexible Erase Capability Uniform 4 KByte sectors Uniform 32 KByte overlay blocks Uniform 64 KByte overlay blocks • Fast Erase and Byte-Program Chip-Erase Time 35 ms typical Sector-/Block-Erase Time 18 ms typical Byte-Program Time 7 µs typical • Auto Address Increment AAI Programming Decrease total chip programming time over Byte-Program operations • End-of-Write Detection Software polling the BUSY bit in Status Register Busy Status readout on SO pin in AAI Mode • Hold Pin HOLD# Suspends a serial sequence to the memory without deselecting the device • Write Protection WP# Enables/Disables the Lock-Down function of the status register • Software Write Protection Write protection through Block-Protection bits in status register • Temperature Range Commercial 0°C to +70°C Industrial -40°C to +85°C • Packages Available 8-lead SOIC 200 mils 8-contact WSON 6mm x 5mm • All devices are RoHS compliant 2011 Silicon Storage Technology, Inc. DS25044A 08/11 A Microchip Technology Company 16 Mbit SPI Serial Flash SST25VF016B Product Description Data Sheet SST’s 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25VF016B devices are enhanced with improved operating frequency and even lower power consumption than the original SST25VFxxxA devices. SST25VF016B SPI serial flash memories are manufactured with SST’s proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. The SST25VF016B devices significantly improve performance and reliability, while lowering power consumption. The devices write Program or Erase with a single power supply of 2.7-3.6V for SST25VF016B. The total energy consumed is a function of the applied voltage, current, and time of application. Since for any given voltage range, the SuperFlash technology uses less current to program and has a shorter erase time, the total energy consumed during any Erase or Program operation is less than alternative flash memory technologies. The SST25VF016B device is offered in both 8-lead SOIC 200 mils and 8-contact WSON 6mm x 5mm packages. See Figure 2 for pin assignments. 2011 Silicon Storage Technology, Inc. DS25044A 08/11 A Microchip Technology Company Block Diagram 16 Mbit SPI Serial Flash SST25VF016B Data Sheet Address Buffers and Latches Product Ordering Information 16 Mbit SPI Serial Flash SST25VF016B Data Sheet SST 25 VF 016B - 50 - 4C - S2AF XX XXXX - XX - XX - XXXX Environmental Attribute F1 = non-Pb / non-Sn contact lead finish Nickel plating with Gold top outer layer Package Modifier A = 8 leads or contacts Package Type S2 = SOIC 200 mil body width Q = WSON Temperature Range C = Commercial = 0°C to +70°C I = Industrial = -40°C to +85°C Minimum Endurance 4 = 10,000 cycles Operating Frequency 50 = 50 MHz 75 = 75 MHz 80MHz Device Density 016 = 16 Mbit Voltage V = 2.7-3.6V Product Series 25 = Serial Peripheral Interface flash memory Environmental suffix “F” denotes non-Pb/non-SN solder. SST non-Pb/non-Sn solder devices are “RoHS Compliant”. Valid combinations for SST25VF016B SST25VF016B-50-4C-S2AF SST25VF016B-50-4C-QAF SST25VF016B-50-4I-S2AF SST25VF016B-50-4I-QAF SST25VF016B-75-4I-S2AF SST25VF016B-75-4I-QAF Note:Valid combinations are those products in mass production or will be in mass production. Consult your SST sales representative to confirm availability of valid combinations and to determine availability of new combinations. 2011 Silicon Storage Technology, Inc. DS25044A 08/11 A Microchip Technology Company Packaging Diagrams Pin #1 Identifier TOP VIEW 16 Mbit SPI Serial Flash SST25VF016B Data Sheet SIDE VIEW Note All linear dimensions are in millimeters max/min . Coplanarity mm Maximum allowable mold flash is mm at the package ends and mm between leads. END VIEW 08-soic-EIAJ-S2A-3 Figure 28 8-lead Small Outline Integrated Circuit SOIC 200 mil body width 5.2mm x 8mm SST Package Code S2A 2011 Silicon Storage Technology, Inc. DS25044A 08/11 A Microchip Technology Company 16 Mbit SPI Serial Flash SST25VF016B Data Sheet Pin #1 Corner Date Apr 2005 Sep 2005 Jan 2006 Sep 2008 Jan 2011 Aug 2011 ISBN:978-1-61341-524-5 2011 Silicon Storage Technology, Microchip Technology Company. All rights reserved. SST, Silicon Storage Technology, the SST logo, SuperFlash, MTP, and FlashFlex are registered trademarks of Silicon Storage Technology, Inc. MPF, SQI, Serial Quad I/O, and Z-Scale are trademarks of Silicon Storage Technology, Inc. All other trademarks and registered trademarks mentioned herein are the property of their respective owners. Specifications are subject to change without notice. Refer to for the most recent documentation. For the most current package drawings, please see the Packaging Specification located at Memory sizes denote raw storage capacity actual usable capacity may be less. SST makes no warranty for the use of its products other than those expressly contained in the Standard Terms and Conditions of Sale. For sales office locations and information, please see Silicon Storage Technology, Inc. A Microchip Technology Company 2011 Silicon Storage Technology, Inc. DS25044A 08/11

PDF Datasheet Preview

A Microchip Technology Company
16 Mbit SPI Serial Flash

SST25VF016B

Data Sheet

SST's 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25VF016B devices are enhanced with improved operating frequency and lower power consumption. SST25VF016B SPI serial flash memories are manufactured with SST's proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.
• Single Voltage Read and Write Operations 2.7-3.6V
• Serial Interface Architecture SPI Compatible Mode 0 and Mode 3
• High Speed Clock Frequency Up to 80 MHz
• Superior Reliability Endurance 100,000 Cycles typical Greater than 100 years Data Retention
• Low Power Consumption Active Read Current 10 mA typical Standby Current 5 µA typical
• Flexible Erase Capability Uniform 4 KByte sectors Uniform 32 KByte overlay blocks Uniform 64 KByte overlay blocks
• Fast Erase and Byte-Program Chip-Erase Time 35 ms typical Sector-/Block-Erase Time 18 ms typical Byte-Program Time 7 µs typical
• Auto Address Increment AAI Programming Decrease total chip programming time over Byte-Program operations
• End-of-Write Detection Software polling the BUSY bit in Status Register Busy Status readout on SO pin in AAI Mode
• Hold Pin HOLD# Suspends a serial sequence to the memory without deselecting the device
• Write Protection WP# Enables/Disables the Lock-Down function of the status register
• Software Write Protection Write protection through Block-Protection bits in status register
• Temperature Range Commercial 0°C to +70°C Industrial -40°C to +85°C
• Packages Available 8-lead SOIC 200 mils 8-contact WSON 6mm x 5mm
• All devices are RoHS compliant
2011 Silicon Storage Technology, Inc.

DS25044A
08/11

A Microchip Technology Company
16 Mbit SPI Serial Flash

SST25VF016B

Product Description

Data Sheet

SST’s 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25VF016B devices are enhanced with improved operating frequency and even lower power consumption than the original SST25VFxxxA devices. SST25VF016B SPI serial flash memories are manufactured with SST’s proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.

The SST25VF016B devices significantly improve performance and reliability, while lowering power consumption. The devices write Program or Erase with a single power supply of 2.7-3.6V for SST25VF016B. The total energy consumed is a function of the applied voltage, current, and time of application. Since for any given voltage range, the SuperFlash technology uses less current to program and has a shorter erase time, the total energy consumed during any Erase or Program operation is less than alternative flash memory technologies.

The SST25VF016B device is offered in both 8-lead SOIC 200 mils and 8-contact WSON 6mm x 5mm packages. See Figure 2 for pin assignments.
2011 Silicon Storage Technology, Inc.

DS25044A
08/11

A Microchip Technology Company

Block Diagram
16 Mbit SPI Serial Flash

SST25VF016B

Data Sheet

Address Buffers
and Latches
Product Ordering Information
16 Mbit SPI Serial Flash

SST25VF016B

Data Sheet

SST 25 VF 016B - 50 - 4C - S2AF XX XXXX - XX - XX - XXXX

Environmental Attribute F1 = non-Pb / non-Sn contact lead finish Nickel plating with Gold top outer layer

Package Modifier A = 8 leads or contacts

Package Type S2 = SOIC 200 mil body width Q = WSON

Temperature Range C = Commercial = 0°C to +70°C I = Industrial = -40°C to +85°C

Minimum Endurance 4 = 10,000 cycles

Operating Frequency 50 = 50 MHz 75 = 75 MHz 80MHz

Device Density 016 = 16 Mbit

Voltage V = 2.7-3.6V

Product Series 25 = Serial Peripheral Interface flash memory

Environmental suffix “F” denotes non-Pb/non-SN solder. SST non-Pb/non-Sn solder devices are “RoHS Compliant”.

Valid combinations for SST25VF016B

SST25VF016B-50-4C-S2AF SST25VF016B-50-4C-QAF SST25VF016B-50-4I-S2AF SST25VF016B-50-4I-QAF SST25VF016B-75-4I-S2AF SST25VF016B-75-4I-QAF

Note:Valid combinations are those products in mass production or will be in mass production. Consult your SST sales representative to confirm availability of valid combinations and to determine availability of new combinations.
2011 Silicon Storage Technology, Inc.

DS25044A
08/11

A Microchip Technology Company

Packaging Diagrams

Pin #1 Identifier

TOP VIEW
16 Mbit SPI Serial Flash

SST25VF016B

Data Sheet

SIDE VIEW

Note All linear dimensions are in millimeters max/min . Coplanarity mm Maximum allowable mold flash is mm at the package ends and mm between leads.

END VIEW
08-soic-EIAJ-S2A-3

Figure 28 8-lead Small Outline Integrated Circuit SOIC 200 mil body width 5.2mm x 8mm SST Package Code S2A
2011 Silicon Storage Technology, Inc.

DS25044A
08/11

A Microchip Technology Company
16 Mbit SPI Serial Flash

SST25VF016B

Data Sheet

Pin #1 Corner
Date Apr 2005 Sep 2005 Jan 2006 Sep 2008

Jan 2011

Aug 2011

ISBN:978-1-61341-524-5 2011 Silicon Storage Technology, Microchip Technology Company. All rights reserved.

SST, Silicon Storage Technology, the SST logo, SuperFlash, MTP, and FlashFlex are registered trademarks of Silicon Storage Technology, Inc. MPF, SQI, Serial Quad I/O, and Z-Scale are trademarks of Silicon Storage Technology, Inc. All other trademarks and registered trademarks mentioned herein are the property of their respective owners. Specifications are subject to change without notice. Refer to for the most recent documentation. For the most current package drawings, please see the Packaging Specification located at Memory sizes denote raw storage capacity actual usable capacity may be less. SST makes no warranty for the use of its products other than those expressly contained in the Standard Terms and Conditions of Sale. For sales office locations and information, please see

Silicon Storage Technology, Inc. A Microchip Technology Company
2011 Silicon Storage Technology, Inc.

DS25044A
08/11

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SST25VF016B-75-4I-S2AF-T Datasheet file may be downloaded here without warranties.

Datasheet ID: SST25VF016B-75-4I-S2AF-T 648206