SST25PF080B-80-4C-SAE-T

SST25PF080B-80-4C-SAE-T Datasheet

Please use SST25VF080B

Part	Datasheet
SST25PF080B-80-4C-SAE-T	SST25PF080B-80-4C-SAE-T (pdf)

Related Parts	Information
SST25PF080B-80-4C-S2AE	SST25PF080B-80-4C-S2AE
SST25PF080B-80-4C-QAE-T	SST25PF080B-80-4C-QAE-T
SST25PF080B-80-4C-SAE	SST25PF080B-80-4C-SAE
SST25PF080B-80-4C-S2AE-T	SST25PF080B-80-4C-S2AE-T
SST25PF080B-80-4C-QAE	SST25PF080B-80-4C-QAE

PDF Datasheet Preview
Obsolete Device Please use SST25VF080B SST25PF080B 8 Mbit 2.3-3.6V SPI Serial Flash • Single Voltage Read and Write Operations - 2.3-3.6V • Serial Interface Architecture - SPI Compatible Mode 0 and Mode 3 • High Speed Clock Frequency - 80 MHz 2.7-3.6V - 50 MHz 2.3-2.7V • Superior Reliability - Endurance 100,000 Cycles typical - Greater than 100 years Data Retention • Low Power Consumption - Active Read Current 10 mA typical - Standby Current 5 uA typical • Flexible Erase Capability - Uniform 4 KByte sectors - Uniform 32 KByte overlay blocks - Uniform 64 KByte overlay blocks • Fast Erase and Byte-Program - Chip-Erase Time 35 ms typical - Sector-/Block-Erase Time 18 ms typical - Byte-Program Time 7 us typical • Auto Address Increment AAI Programming - Decrease total chip programming time over Byte-Program operations • End-of-Write Detection - Software polling the BUSY bit in Status Register - Busy Status readout on SO pin in AAI Mode • Hold Pin HOLD# - Suspends a serial sequence to the memory without deselecting the device • Write Protection WP# - Enables/Disables the Lock-Down function of the status register • Software Write Protection - Write protection through Block-Protection bits in status register • Temperature Range - Commercial 0°C to +70°C • Packages Available - 8-lead SOIC 150 mils - 8-lead SOIC 200 mils - 8-contact WSON 6mm x 5mm • All devices are RoHS compliant Product Description The 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25PF080B devices are enhanced with improved operating frequency and lower power consumption. SST25PF080B SPI serial flash memories are manufactured with proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. The SST25PF080B devices significantly improve performance and reliability, while lowering power consumption. The devices write Program or Erase with a single power supply of 2.3-3.6V for SST25PF080B. The total energy consumed is a function of the applied voltage, current, and time of application. Since for any given voltage range, the SuperFlash technology uses less current to program and has a shorter erase time, the total energy consumed during any Erase or Program operation is less than alternative flash memory technologies. The SST25PF080B device is offered in 8-lead SOIC 150 mils , 8-lead SOIC 200 mils , and 8-contact WSON 6mm x 5mm . See Figure 2-1 for pin assignments. 2014 Microchip Technology Inc. DS20005137B-page 1 SST25PF080B BLOCK DIAGRAM Address Buffers and Latches X - Decoder SuperFlash Memory Y - Decoder Control Logic I/O Buffers and Data Latches FIGURE 1-1: Serial Interface CE# SCK SI SO WP# HOLD# 25137 B1.0 FUNCTIONAL BLOCK DIAGRAM DS20005137B-page 2 2014 Microchip Technology Inc. • Business of Microchip Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives CUSTOMER CHANGE NOTIFICATION SERVICE CUSTOMER SUPPORT Users of Microchip products can receive assistance through several channels • Distributor or Representative • Local Sales Office • Field Application Engineer FAE • Technical Support • Development Systems Information Line Customers should contact their distributor, representative or field application engineer FAE for support. Local sales offices are also available to help customers. A listing of sales offices and locations is DS20005137B-page 30 2014 Microchip Technology Inc. Note the following details of the code protection feature on Microchip devices • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. Trademarks The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, PIC32 logo, rfPIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MTP, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries. Analog-for-the-Digital Age, Application Maestro, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE, rfLAB, Select Mode, SQI, Serial Quad I/O, Total Endurance, TSHARC, UniWinDriver, WiperLock, ZENA and Z-Scale are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. GestIC and ULPP are registered trademarks of Microchip Technology Germany II GmbH & Co. & KG, a subsidiary of Microchip Technology Inc., in other countries. All other trademarks mentioned herein are property of their respective companies. 2014, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. ISBN: Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its MCUs and DSCs, code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. 2014 Microchip Technology Inc. DS20005137B-page 31 Worldwide Sales and Service AMERICAS Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel 480-792-7200 Fax 480-792-7277 Technical Support Web Address: Atlanta Duluth, GA Tel 678-957-9614 Fax 678-957-1455 Boston Westborough, MA Tel 774-760-0087 Fax 774-760-0088 Chicago Itasca, IL Tel 630-285-0071 Fax 630-285-0075 Cleveland Independence, OH Tel 216-447-0464 Fax 216-447-0643 Dallas Addison, TX Tel 972-818-7423 Fax 972-818-2924 Detroit Farmington Hills, MI Tel 248-538-2250 Fax 248-538-2260 Indianapolis Noblesville, IN Tel 317-773-8323 Fax 317-773-5453 Los Angeles Mission Viejo, CA Tel 949-462-9523 Fax 949-462-9608 Santa Clara Santa Clara, CA Tel 408-961-6444 Fax 408-961-6445 Toronto Mississauga, Ontario, Canada Tel 905-673-0699 Fax 905-673-6509 ASIA/PACIFIC

PDF Datasheet Preview

Obsolete Device

Please use SST25VF080B

SST25PF080B
8 Mbit 2.3-3.6V SPI Serial Flash
• Single Voltage Read and Write Operations - 2.3-3.6V
• Serial Interface Architecture - SPI Compatible Mode 0 and Mode 3
• High Speed Clock Frequency - 80 MHz 2.7-3.6V - 50 MHz 2.3-2.7V
• Superior Reliability - Endurance 100,000 Cycles typical - Greater than 100 years Data Retention
• Low Power Consumption - Active Read Current 10 mA typical - Standby Current 5 uA typical
• Flexible Erase Capability - Uniform 4 KByte sectors - Uniform 32 KByte overlay blocks - Uniform 64 KByte overlay blocks
• Fast Erase and Byte-Program - Chip-Erase Time 35 ms typical - Sector-/Block-Erase Time 18 ms typical - Byte-Program Time 7 us typical
• Auto Address Increment AAI Programming - Decrease total chip programming time over Byte-Program operations
• End-of-Write Detection - Software polling the BUSY bit in Status Register - Busy Status readout on SO pin in AAI Mode
• Hold Pin HOLD# - Suspends a serial sequence to the memory without deselecting the device
• Write Protection WP# - Enables/Disables the Lock-Down function of the status register
• Software Write Protection - Write protection through Block-Protection bits in status register
• Temperature Range - Commercial 0°C to +70°C
• Packages Available - 8-lead SOIC 150 mils - 8-lead SOIC 200 mils - 8-contact WSON 6mm x 5mm
• All devices are RoHS compliant

Product Description

The 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. The SST25PF080B devices are enhanced with improved operating frequency and lower power consumption. SST25PF080B SPI serial flash memories are manufactured with proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.

The SST25PF080B devices significantly improve performance and reliability, while lowering power consumption. The devices write Program or Erase with a single power supply of 2.3-3.6V for SST25PF080B. The total energy consumed is a function of the applied voltage, current, and time of application. Since for any given voltage range, the SuperFlash technology uses less current to program and has a shorter erase time, the total energy consumed during any Erase or Program operation is less than alternative flash memory technologies.

The SST25PF080B device is offered in 8-lead SOIC 150 mils , 8-lead SOIC 200 mils , and 8-contact WSON 6mm x 5mm . See Figure 2-1 for pin assignments.
2014 Microchip Technology Inc.

DS20005137B-page 1

SST25PF080B

BLOCK DIAGRAM

Address Buffers
and Latches

X - Decoder

SuperFlash Memory

Y - Decoder

Control Logic

I/O Buffers and

Data Latches

FIGURE 1-1:

Serial Interface CE# SCK SI SO WP# HOLD#
25137 B1.0

FUNCTIONAL BLOCK DIAGRAM

DS20005137B-page 2
2014 Microchip Technology Inc.
• Business of Microchip Product selector and ordering guides, latest Microchip press releases, listing of seminars and events, listings of Microchip sales offices, distributors and factory representatives

CUSTOMER CHANGE NOTIFICATION SERVICE

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels
• Distributor or Representative
• Local Sales Office
• Field Application Engineer FAE
• Technical Support
• Development Systems Information Line Customers should contact their distributor, representative or field application engineer FAE for support. Local sales offices are also available to help customers. A listing of sales offices and locations is

DS20005137B-page 30
2014 Microchip Technology Inc.

Note the following details of the code protection feature on Microchip devices
• Microchip products meet the specification contained in their particular Microchip Data Sheet.
• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions.
• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
• Microchip is willing to work with the customer who is concerned about the integrity of their code.
• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.

Trademarks

The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, PIC32 logo, rfPIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.

FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MTP, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A.

Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries.

Analog-for-the-Digital Age, Application Maestro, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE, rfLAB, Select Mode, SQI, Serial Quad I/O, Total Endurance, TSHARC, UniWinDriver, WiperLock, ZENA and Z-Scale are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.

SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.

GestIC and ULPP are registered trademarks of Microchip Technology Germany II GmbH & Co. & KG, a subsidiary of Microchip Technology Inc., in other countries.

All other trademarks mentioned herein are property of their respective companies.
2014, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved.

Printed on recycled paper.

ISBN:

Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its MCUs and DSCs, code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified.
2014 Microchip Technology Inc.

DS20005137B-page 31

Worldwide Sales and Service

AMERICAS

Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel 480-792-7200 Fax 480-792-7277 Technical Support Web Address:

Atlanta Duluth, GA Tel 678-957-9614 Fax 678-957-1455

Boston Westborough, MA Tel 774-760-0087 Fax 774-760-0088

Chicago Itasca, IL Tel 630-285-0071 Fax 630-285-0075

Cleveland Independence, OH Tel 216-447-0464 Fax 216-447-0643

Dallas Addison, TX Tel 972-818-7423 Fax 972-818-2924

Detroit Farmington Hills, MI Tel 248-538-2250 Fax 248-538-2260

Indianapolis Noblesville, IN Tel 317-773-8323 Fax 317-773-5453

Los Angeles Mission Viejo, CA Tel 949-462-9523 Fax 949-462-9608

Santa Clara Santa Clara, CA Tel 408-961-6444 Fax 408-961-6445

Toronto Mississauga, Ontario, Canada Tel 905-673-0699 Fax 905-673-6509

ASIA/PACIFIC

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SST25PF080B-80-4C-SAE-T Datasheet file may be downloaded here without warranties.

Datasheet ID: SST25PF080B-80-4C-SAE-T 648205