DSPIC30F1010T-30I/SO

DSPIC30F1010T-30I/SO Datasheet

dsPIC30F1010/202X

Part	Datasheet
DSPIC30F1010T-30I/SO	DSPIC30F1010T-30I/SO (pdf)

Related Parts	Information
DSPIC30F1010T-30I/MM	DSPIC30F1010T-30I/MM
DM300023	DM300023

PDF Datasheet Preview
dsPIC30F1010/202X dsPIC30F1010/202X Family Silicon Errata and Data Sheet Clarification The dsPIC30F1010/202X family devices that you have received conform functionally to the current Device Data Sheet DS70178C , except for the anomalies described in this document. Note: Data Sheet clarifications and corrections start on Page 17, following the discussion of silicon issues. Using the appropriate interface, connect the device to the hardware debugger. Open an MPLAB IDE project. Configure the MPLAB IDE project for the appropriate device and hardware debugger. Based on the version of MPLAB IDE you are using, do one of the following: a For MPLAB IDE 8, select Programmer > Reconnect. b For MPLAB X IDE, select Window > Dashboard and click the Refresh Debug Tool Status icon Note: TABLE 1 SILICON DEVREV VALUES Device ID dsPIC30F1010 0x4040 dsPIC30F2020 0x4000 0x1000 0x1001 0x1002 0x1003 dsPIC30F2023 0x4030 2008-2013 Microchip Technology Inc. DS80000391B-page 1 dsPIC30F1010/202X TABLE 2 Module SILICON ISSUE SUMMARY Item Number Issue Summary PWM Dead Time If a value less than 0x0010 is written to the DTRx and ALTDTRx registers, either or both of the PWMxH and PWMxL outputs will not function. PWM Duty Cycle Duty cycle resolution is not ns over the X entire duty cycle range. PWM Trigger The PWM Special Event Trigger and PWM Individual Trigger do not function near the beginning of the PWM period.

PDF Datasheet Preview

dsPIC30F1010/202X
dsPIC30F1010/202X Family Silicon Errata and Data Sheet Clarification

The dsPIC30F1010/202X family devices that you have received conform functionally to the current Device Data Sheet DS70178C , except for the anomalies described in this document.

Note:

Data Sheet clarifications and corrections start on Page 17, following the discussion of silicon issues.

Using the appropriate interface, connect the device to the hardware debugger.

Open an MPLAB IDE project.

Configure the MPLAB IDE project for the appropriate device and hardware debugger.

Based on the version of MPLAB IDE you are using, do one of the following:
a For MPLAB IDE 8, select Programmer > Reconnect.
b For MPLAB X IDE, select Window > Dashboard and click the Refresh Debug Tool Status icon

Note:

TABLE 1 SILICON DEVREV VALUES

Device ID
dsPIC30F1010
0x4040
dsPIC30F2020
0x4000
0x1000
0x1001
0x1002
0x1003
dsPIC30F2023
0x4030
2008-2013 Microchip Technology Inc.

DS80000391B-page 1
dsPIC30F1010/202X

TABLE 2 Module

SILICON ISSUE SUMMARY

Item Number

Issue Summary

PWM Dead Time

If a value less than 0x0010 is written to
the DTRx and ALTDTRx registers, either
or both of the PWMxH and PWMxL
outputs will not function.

PWM Duty Cycle

Duty cycle resolution is not ns over the X
entire duty cycle range.

PWM Trigger

The PWM Special Event Trigger and PWM Individual Trigger do not function near the beginning of the PWM period.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DSPIC30F1010T-30I/SO Datasheet file may be downloaded here without warranties.

Datasheet ID: DSPIC30F1010T-30I/SO 648100