AC244052

AC244052 Datasheet

PEP and Debug Header Help Required Debug Headers AC244051, AC244052, AC244061

Part	Datasheet
AC244052	AC244052 (pdf)

Related Parts	Information
AC244061	AC244061

PDF Datasheet Preview
PEP and Debug Header Help Required Debug Headers AC244051, AC244052, AC244061 AC244051, AC244052, AC244061 1/2 AC244051, AC244052, AC244061 Header Identification The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information. AC Number AC244051 AC244052 AC244061 -ICE/-ICD Device PIC16F1509-ICE PIC16LF1509-ICE PIC16F527-ICD Board Assembly Number 02-02208 Header Setup and Operation For these headers, there are no jumpers/switches.MPLAB X IDE will use its selected device to choose the correct device to emulate. These headers support 8-, 14- and 20-pin devices. For 8- and 14-pin devices, make sure device pin 1 is placed at the 20-pin connector pin Header Limitations See the “Limitations” section in your debug tool online Help file for details. Header Dimensions The figure below lists the dimensions for the debug headers. Dimensions are design values in inches. If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target. Figure Dimensions - AC244051, AC244052, AC244061 AC244051, AC244052, AC244061 2/2 Microchip Support Help Updated 2014-06-10 16:25:02Z Help Page 25

PDF Datasheet Preview

PEP and Debug Header Help Required Debug Headers AC244051, AC244052, AC244061

AC244051, AC244052, AC244061 1/2

AC244051, AC244052, AC244061

Header Identification
The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number AC244051 AC244052 AC244061
-ICE/-ICD Device PIC16F1509-ICE PIC16LF1509-ICE PIC16F527-ICD

Board Assembly Number 02-02208

Header Setup and Operation For these headers, there are no jumpers/switches.MPLAB X IDE will use its selected device to choose the correct device to emulate. These headers support 8-, 14- and 20-pin devices. For 8- and 14-pin devices, make sure device pin 1 is placed at the 20-pin connector pin

Header Limitations See the “Limitations” section in your debug tool online Help file for details.

Header Dimensions The figure below lists the dimensions for the debug headers. Dimensions are design values in inches. If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

Figure Dimensions - AC244051, AC244052, AC244061

AC244051, AC244052, AC244061 2/2

Microchip Support Help Updated 2014-06-10 16:25:02Z

Help Page 25

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AC244052 Datasheet file may be downloaded here without warranties.

Datasheet ID: AC244052 648060