SY100EPT21LKI
SY100EPT21LKI Datasheet
ECSYL10P0rEoP T21L SY100EPT21L
| Part | Datasheet |
|---|---|
SY100EPT21LKI |
SY100EPT21LKI (pdf) |
| Related Parts | Information |
|---|---|
|
SY100EPT21LZG-TR |
SY100EPT21LZG-TR |
|
SY100EPT21LZG |
SY100EPT21LZG |
|
SY100EPT21LKI-TR |
SY100EPT21LKI-TR |
|
SY100EPT21LZI-TR |
SY100EPT21LZI-TR |
|
SY100EPT21LZI |
SY100EPT21LZI |
|
SY100EPT21LZC-TR |
SY100EPT21LZC-TR |
|
SY100EPT21LZC |
SY100EPT21LZC |
|
SY100EPT21LKC |
SY100EPT21LKC |
|
SY100EPT21LKG-TR |
SY100EPT21LKG-TR |
|
SY100EPT21LKG |
SY100EPT21LKG |
| PDF Datasheet Preview |
|---|
| Micrel, Inc. 3.3V DIFFERENTIAL LVPECL-to-LVTTL TRANSLATOR ECL Pro ECSYL10P0rEoP T21L SY100EPT21L • Guaranteed over the industrial temperature range to +85°C • Pin-for-pin plug-in replacement to MC100EPT21D/DT • 3.3V power supply • 1.9ns typical propagation delay • 275MHz fMAX Clock • Differential LVPECL inputs • 24mA LVTTL output • Flow-through pinout • Q output will default LOW with inputs open • VBB output • Available in 8-pin MSOP and SOIC packages • ASIC/FPGA interface • Legacy interface • Precision differential-to-general purpose, single- ended translation ECL Pro The SY100EPT21L is a single, differential LVPECLto-LVTTL translator using a single +3.3V power supply. Because low voltage positive ECL LVPECL levels are used, only +3.3V and ground are required. The small outline 8-pin SOIC package and low-skew, single-gate design make the EPT21L ideal for applications that require the translation of a clock or data signal where minimal space, low power, and low cost are critical. VBB allows a differential, single-ended, or AC-coupled interface to the device. If used, the VBB output should be bypassed to VCC with 0.01µF capacitor. Under open input conditions, the /D will be biased at a VCC/2 voltage level and the D input will be pulled to ground. This condition will force the Q output low to provide added stability. The 100EPT is compatible with positive ECL 100K logic levels. For applications that require the smallest footprint, consider the SY89321L in an ultra-small 2mm x 2mm 8-pin MLF package. All support documentation can be found on Micrel’s web site at: CROSS REFERENCE TABLE Micrel SY100EPT21LZI SY100EPT21LZITR SY100EPT21LKI SY100EPT21LKITR ON Semiconductor MC100EPT21D MC100EPT21DR2 MC100EPT21DT MC100EPT21DTR2 ECL Pro is a trademark of Micrel, Inc. MicroLeadFrame and MLF are trademarks of Amkor Technology, Inc. M9999-120505 or 408 955-1690 Micrel, Inc. ECL Pro SY100EPT21L PACKAGE/ORDERING INFORMATION LVPECL 8 VCC LVTTL 7 Q VBB 4 5 GND 8-Pin SOIC Z8-1 8-Pin MSOP K8-1 Ordering Information 1 Package Operating Type Range Package Marking Lead Finish SY100EPT21LZC SY100EPT21LZCTR 2 Z8-1 Z8-1 Commercial XEP21L Sn-Pb Sn-Pb SY100EPT21LKC SY100EPT21LKCTR 2 K8-1 K8-1 Commercial XP21 Sn-Pb Sn-Pb SY100EPT21LZI SY100EPT21LZITR 2 Z8-1 Z8-1 Industrial XEP21L Sn-Pb Sn-Pb SY100EPT21LKI SY100EPT21LKITR 2 SY100EPT21LZG 3 K8-1 K8-1 Z8-1 SY100EPT21LZGTR 2, 3 Z8-1 SY100EPT21LKG 3 K8-1 SY100EPT21LKGTR 2, 3 K8-1 Industrial Industrial Industrial Industrial XP21 XP21 XEP21L with Pb-Free bar-line indicator XEP21L with Pb-Free bar-line indicator XP21 with Pb-Free bar-line indicator XP21 with Pb-Free bar-line indicator Sn-Pb Sn-Pb Pb-Free NiPdAu Pb-Free NiPdAu |
| More datasheets: R542-000-120 | R542-000-082 | R542-000-080 | R543-000-001 | R541-000-000 | R546-000-000 | SY100EPT21LZG-TR | SY100EPT21LZG | SY100EPT21LKI-TR | SY100EPT21LZI-TR |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SY100EPT21LKI Datasheet file may be downloaded here without warranties.