T89C51CC02CA-SISIM

T89C51CC02CA-SISIM Datasheet

T89C51CC02

Part	Datasheet
T89C51CC02CA-SISIM	T89C51CC02CA-SISIM (pdf)

Related Parts	Information
T89C51CC02CA-TDSIM	T89C51CC02CA-TDSIM
T89C51CC02UA-RATIM	T89C51CC02UA-RATIM
T89C51CC02CA-TISIM	T89C51CC02CA-TISIM
T89C51CC02UA-TDSIM	T89C51CC02UA-TDSIM
T89C51CC02UA-SISIM	T89C51CC02UA-SISIM
T89C51CC02UA-TISIM	T89C51CC02UA-TISIM
T89C51CC02CA-RATIM	T89C51CC02CA-RATIM
T89C51CC02CA-6KSIM	T89C51CC02CA-6KSIM
T89C51CC02UA-SITIM	T89C51CC02UA-SITIM
T89C51CC02UA-6KSIM	T89C51CC02UA-6KSIM

PDF Datasheet Preview
• 80C51 Core Architecture • 256 Bytes of On-chip RAM • 256 Bytes of On-chip XRAM • 16K Bytes of On-chip Flash Memory -Each Message Object Programmable on Transmission or Reception -Individual Tag and Mask Filters up to 29-bit Identifier/Channel -8-byte Cyclic Data Register FIFO /Message Object -16-bit Status and Control Register/Message Object -16-bit Time-Stamping Register/Message Object -CAN Specification Part A or Part B Programmable for Each Message Object -Access to Message Object Control and Data Registers Via SFR -Programmable Reception Buffer Length up to 4 Message Objects -Priority Management of Reception of Hits on Several Message Objects Simultaneously Basic CAN Feature -Priority Management for Transmission -Message Object Overrun Interrupt Supports -Time Triggered Communication -Autobaud and Listening Mode -Programmable Automatic Reply Mode • 1-Mbit/s Maximum Transfer Rate at 8 MHz 1 Crystal Frequency In X2 Mode • Readable Error Counters • Programmable Link to On-chip Timer for Time Stamping and Network Synchronization • Independent Baud Rate Prescaler • Data, Remote, Error and Overload Frame Handling • Power-saving Modes Idle Mode Power-down Mode • Power Supply 3 Volts to Volts • Temperature Range Industrial -40° to +85°C • Packages SOIC28, SOIC24, PLCC28, VQFP32 Enhanced 8-bit Microcontroller with CAN Controller and Flash T89C51CC02 Note At BRP = 1 sampling point will be fixed. Description Block Diagram Part of the CANaryTM family of 8-bit microcontrollers dedicated to CAN network applications, the T89C51CC02 is a low-pin count 8-bit Flash microcontroller. In X2 Mode a maximum external clock rate of 20 MHz reaches a 300 ns cycle time. Besides the full CAN controller T89C51CC02 provides 16K Bytes of Flash memory including In-System Programming ISP , 2K Bytes Boot Flash Memory, 2K Bytes EEPROM and 512 Bytes RAM. Special attention is payed to the reduction of the electro-magnetic emission of T89C51CC02. RxD TxD Vcc Vss ECI PCA T2EX T2 RxDC TxDC XTAL1 XTAL2 UART RAM 256x8 Flash Boot EE XRAM 16K x loader PROM 256 x 8 2K x 8 2K x 8 C51 CORE IB-bus PCA Timer 2 CONTROLLER Timer 0 INT Timer 1 Ctrl Parallel I/O Ports Port 1 Port 2 Port 3Port 4 Watch Dog 10-bit ADC RESET T0 T1 INT0 INT1 P1 1 P2 2 P3 P4 2 VAREF VAVCC VAGND Note 8 analog Inputs/8 Digital I/O. 2-bit I/O Port. 2 T89C51CC02 Pin Configurations VAREF 1 VAGND 2 VAVCC 3 P4.1/RxDC 4 P4.0/TxDC 5 P2.1 6 P3.7 P3.6 8 P3.5/T1 9 P3.4/T0 10 P3.3/INT1 11 P3.2/INT0 12 P3.1/TxD 13 P3.0/RxD 14 SO28 28 P1.0/AN0/T2 27 P1.1/AN1/T2EX 26 P1.2/AN2/ECI 25 P1.3/AN3/CEX0 24 P1.4/AN4/CEX1 23 P1.5/AN5 22 P1.6/AN6 21 P1.7/AN7 20 P2.0 19 RESET 18 VSS 17 VCC 16 XTAL1 15 XTAL2 VAREF 1 VAGND 2 VAVCC 3 P4.1/RxDC 4 P4.0/TxDC 5 Ordering Information Part Number T89C51CC02CA-RATIM T89C51CC02CA-SISIM T89C51CC02CA-TDSIM T89C51CC02CA-TISIM T89C51CC02UA-RATIM T89C51CC02UA-SISIM T89C51CC02UA-TDSIM T89C51CC02UA-TISIM Bootloader CAN 2 CAN 2 CAN 2 CAN 2 UART 2 UART 2 UART 2 UART 2 Temperature Range Industrial Package VQFP32 PLCC28 SOIC24 SOIC28 VQFP32 PLCC28 SOIC24 SOIC28 Packing Tray Stick Tray Stick Product Marking 89C51CC02CA-IM 89C51CC02CA-IM 89C51CC02CA-IM 89C51CC02CA-IM 89C51CC02UA-IM 89C51CC02UA-IM 89C51CC02UA-IM 89C51CC02UA-IM Factory default programming for T89C51CC02CA-xxxx is Bootloader CAN and HSB = BBh • X1 mode • BLJB = 0 jump to Bootloader • LB2 = 0 Security Level Factory default programming for T89C51CC02UA-xxxx is Bootloader UART and HSB = BBh: • X1 mode • BLJB = 0 jump to Bootloader • LB2 = 0 Security Level LB2 = 0 is not described in Table 22 Program load bit. LB2 = 0 is equivalent to LB1 = 0 Security Level Customer can change these modes by re-programming with a parallel programmer, this can be done by an Atmel distributor. 138 T89C51CC02 Package Drawings VQFP32 T89C51CC02 PLCC28 140 T89C51CC02 SOIC24 T89C51CC02 SOIC28 142 T89C51CC02 T89C51CC02 Datasheet Change Log for T89C51CC02 Changes from 4126C10/02 to 4126D-04/03 Changes from 4126D05/03 to 4126E - 10/03 Changes from 4126E 10/03 to 4126F - 12/03 Changed the endurance of Flash to 100, 000 Write/Erase cycles. Added note on Flash retention formula for VIH1, in Section "DC Parameters for Standard Voltage", page 141.Changes from 4129F-11/02 to 4129G-04/03 Changed the endurance of Flash to 100, 000 Write/Erase cycles. Added note on Flash retention formula for VIH1, in Section "DC Parameters for Standard Voltage", page Updated “Electrical Characteristics” on page Corrected Figure 35 on page Changed value of IPDMAX to 400, Section "Absolute Maximum Ratings", page PCA , CPS0, register correction, Section "PCA Registers", page Cross Memory section added. Section "Operation Cross Memory Access", Table of Contents Table of Contents Features 1 Description 2 Block Diagram 2 Pin Configurations 3 Pin 5 Ordering Information 138 Package Drawings 139 139 PLCC28 140 141 142 Datasheet Change Log for T89C51CC02 143 Changes from 4126C - 10/02 to 4126D - 04/03 143 Changes from 4126D - 05/03 to 4126E - 10/03 143 Changes from 4126E - 10/03 to 4126F - 12/03 143 Table of Contents i Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131, USA Tel 1 408 441-0311 Fax 1 408 487-2600 Regional Headquarters Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland Tel 41 26-426-5555 Fax 41 26-426-5500 Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel 852 2721-9778 Fax 852 2722-1369 Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel 81 3-3523-3551 Fax 81 3-3523-7581 Atmel Operations Memory 2325 Orchard Parkway San Jose, CA 95131, USA Tel 1 408 441-0311 Fax 1 408 436-4314 Microcontrollers 2325 Orchard Parkway San Jose, CA 95131, USA Tel 1 408 441-0311 Fax 1 408 436-4314 La Chantrerie BP 70602 44306 Nantes Cedex 3, France Tel 33 2-40-18-18-18 Fax 33 2-40-18-19-60 ASIC/ASSP/Smart Cards Zone Industrielle 13106 Rousset Cedex, France Tel 33 4-42-53-60-00 Fax 33 4-42-53-60-01 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel 1 719 576-3300 Fax 1 719 540-1759 Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland Tel 44 1355-803-000 Fax 44 1355-242-743 RF/Automotive Theresienstrasse 2 Postfach 3535 74025 Heilbronn, Germany Tel 49 71-31-67-0 Fax 49 71-31-67-2340 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel 1 719 576-3300 Fax 1 719 540-1759 Biometrics/Imaging/Hi-Rel MPU/ High Speed Converters/RF Datacom Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex, France Tel 33 4-76-58-30-00 Fax 33 4-76-58-34-80 Literature Requests Disclaimer Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems. Atmel Corporation All rights reserved. and combinations thereof are the registered trademarksof Atmel Corporation or its subsidiaries. Other terms and product names may be the trademarks of others. Printed on recycled paper.

PDF Datasheet Preview

• 80C51 Core Architecture
• 256 Bytes of On-chip RAM
• 256 Bytes of On-chip XRAM
• 16K Bytes of On-chip Flash Memory
-Each Message Object Programmable on Transmission or Reception -Individual Tag and Mask Filters up to 29-bit Identifier/Channel -8-byte Cyclic Data Register FIFO /Message Object -16-bit Status and Control Register/Message Object -16-bit Time-Stamping Register/Message Object -CAN Specification Part A or Part B Programmable for Each Message Object -Access to Message Object Control and Data Registers Via SFR -Programmable Reception Buffer Length up to 4 Message Objects -Priority Management of Reception of Hits on Several Message Objects Simultaneously Basic CAN Feature -Priority Management for Transmission -Message Object Overrun Interrupt Supports -Time Triggered Communication -Autobaud and Listening Mode -Programmable Automatic Reply Mode
• 1-Mbit/s Maximum Transfer Rate at 8 MHz 1 Crystal Frequency In X2 Mode
• Readable Error Counters
• Programmable Link to On-chip Timer for Time Stamping and Network Synchronization
• Independent Baud Rate Prescaler
• Data, Remote, Error and Overload Frame Handling
• Power-saving Modes Idle Mode Power-down Mode
• Power Supply 3 Volts to Volts
• Temperature Range Industrial -40° to +85°C
• Packages SOIC28, SOIC24, PLCC28, VQFP32

Enhanced 8-bit Microcontroller with CAN Controller and Flash

T89C51CC02

Note At BRP = 1 sampling point will be fixed.

Description Block Diagram

Part of the CANaryTM family of 8-bit microcontrollers dedicated to CAN network applications, the T89C51CC02 is a low-pin count 8-bit Flash microcontroller.

In X2 Mode a maximum external clock rate of 20 MHz reaches a 300 ns cycle time.

Besides the full CAN controller T89C51CC02 provides 16K Bytes of Flash memory including In-System Programming ISP , 2K Bytes Boot Flash Memory, 2K Bytes EEPROM and 512 Bytes RAM.

Special attention is payed to the reduction of the electro-magnetic emission of T89C51CC02.

RxD TxD Vcc Vss ECI PCA T2EX T2 RxDC TxDC

XTAL1 XTAL2

UART

RAM 256x8

Flash Boot EE XRAM
16K x loader PROM 256 x 8 2K x 8 2K x 8

C51 CORE

IB-bus

PCA Timer 2

CONTROLLER

Timer 0 INT Timer 1 Ctrl

Parallel I/O Ports Port 1 Port 2 Port 3Port 4

Watch Dog
10-bit ADC

RESET T0 T1

INT0 INT1 P1 1 P2 2

P3 P4 2 VAREF VAVCC VAGND

Note 8 analog Inputs/8 Digital I/O. 2-bit I/O Port.
2 T89C51CC02

Pin Configurations

VAREF 1 VAGND 2 VAVCC 3 P4.1/RxDC 4 P4.0/TxDC 5

P2.1 6 P3.7 P3.6 8 P3.5/T1 9 P3.4/T0 10 P3.3/INT1 11 P3.2/INT0 12

P3.1/TxD 13

P3.0/RxD 14

SO28
28 P1.0/AN0/T2 27 P1.1/AN1/T2EX 26 P1.2/AN2/ECI 25 P1.3/AN3/CEX0
24 P1.4/AN4/CEX1 23 P1.5/AN5 22 P1.6/AN6 21 P1.7/AN7 20 P2.0 19 RESET 18 VSS 17 VCC
16 XTAL1
15 XTAL2

VAREF 1 VAGND 2

VAVCC 3 P4.1/RxDC 4 P4.0/TxDC 5
Ordering Information

Part Number T89C51CC02CA-RATIM T89C51CC02CA-SISIM T89C51CC02CA-TDSIM T89C51CC02CA-TISIM T89C51CC02UA-RATIM T89C51CC02UA-SISIM T89C51CC02UA-TDSIM T89C51CC02UA-TISIM

Bootloader CAN 2 CAN 2 CAN 2 CAN 2 UART 2 UART 2 UART 2 UART 2

Temperature Range Industrial

Package VQFP32 PLCC28 SOIC24 SOIC28 VQFP32 PLCC28 SOIC24 SOIC28

Packing Tray Stick Tray Stick

Product Marking 89C51CC02CA-IM 89C51CC02CA-IM 89C51CC02CA-IM 89C51CC02CA-IM 89C51CC02UA-IM 89C51CC02UA-IM 89C51CC02UA-IM 89C51CC02UA-IM

Factory default programming for T89C51CC02CA-xxxx is Bootloader CAN and HSB = BBh
• X1 mode
• BLJB = 0 jump to Bootloader
• LB2 = 0 Security Level

Factory default programming for T89C51CC02UA-xxxx is Bootloader UART and HSB = BBh:
• X1 mode
• BLJB = 0 jump to Bootloader
• LB2 = 0 Security Level

LB2 = 0 is not described in Table 22 Program load bit. LB2 = 0 is equivalent to LB1 = 0 Security Level

Customer can change these modes by re-programming with a parallel programmer, this can be done by an Atmel distributor.
138 T89C51CC02

Package Drawings

VQFP32

T89C51CC02

PLCC28
140 T89C51CC02

SOIC24

T89C51CC02

SOIC28
142 T89C51CC02

T89C51CC02

Datasheet Change Log for T89C51CC02

Changes from 4126C10/02 to 4126D-04/03

Changes from 4126D05/03 to 4126E - 10/03 Changes from 4126E 10/03 to 4126F - 12/03

Changed the endurance of Flash to 100, 000 Write/Erase cycles. Added note on Flash retention formula for VIH1, in Section "DC Parameters for

Standard Voltage", page 141.Changes from 4129F-11/02 to 4129G-04/03 Changed the endurance of Flash to 100, 000 Write/Erase cycles. Added note on Flash retention formula for VIH1, in Section "DC Parameters for

Standard Voltage", page

Updated “Electrical Characteristics” on page Corrected Figure 35 on page

Changed value of IPDMAX to 400, Section "Absolute Maximum Ratings", page

PCA , CPS0, register correction, Section "PCA Registers", page Cross Memory section added. Section "Operation Cross Memory Access",

Table of Contents

Table of Contents

Features 1

Description 2

Block Diagram 2

Pin Configurations 3

Pin 5
Ordering Information 138 Package Drawings 139
139 PLCC28 140 141 142

Datasheet Change Log for T89C51CC02 143

Changes from 4126C - 10/02 to 4126D - 04/03 143 Changes from 4126D - 05/03 to 4126E - 10/03 143 Changes from 4126E - 10/03 to 4126F - 12/03 143

Table of Contents i

Atmel Corporation
2325 Orchard Parkway San Jose, CA 95131, USA Tel 1 408 441-0311 Fax 1 408 487-2600

Regional Headquarters

Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland Tel 41 26-426-5555 Fax 41 26-426-5500

Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel 852 2721-9778 Fax 852 2722-1369

Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel 81 3-3523-3551 Fax 81 3-3523-7581

Atmel Operations

Memory 2325 Orchard Parkway San Jose, CA 95131, USA Tel 1 408 441-0311 Fax 1 408 436-4314

Microcontrollers 2325 Orchard Parkway San Jose, CA 95131, USA Tel 1 408 441-0311 Fax 1 408 436-4314

La Chantrerie BP 70602 44306 Nantes Cedex 3, France Tel 33 2-40-18-18-18 Fax 33 2-40-18-19-60

ASIC/ASSP/Smart Cards Zone Industrielle 13106 Rousset Cedex, France Tel 33 4-42-53-60-00 Fax 33 4-42-53-60-01
1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel 1 719 576-3300 Fax 1 719 540-1759

Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland Tel 44 1355-803-000 Fax 44 1355-242-743

RF/Automotive Theresienstrasse 2 Postfach 3535 74025 Heilbronn, Germany Tel 49 71-31-67-0 Fax 49 71-31-67-2340 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel 1 719 576-3300 Fax 1 719 540-1759

Biometrics/Imaging/Hi-Rel MPU/ High Speed Converters/RF Datacom

Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex, France Tel 33 4-76-58-30-00 Fax 33 4-76-58-34-80

Literature Requests

Disclaimer Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems.

Atmel Corporation All rights reserved. and combinations thereof are the registered trademarksof Atmel Corporation or its subsidiaries. Other terms and product names may be the trademarks of others.

Printed on recycled paper.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived T89C51CC02CA-SISIM Datasheet file may be downloaded here without warranties.

Datasheet ID: T89C51CC02CA-SISIM 519425