E5530H-232-S8

E5530H-232-S8 Datasheet

e5530

Part	Datasheet
E5530H-232-S8	E5530H-232-S8 (pdf)

PDF Datasheet Preview
• Low-power, Low-voltage CMOS • Rectifier, Voltage Limiter, Clock Extraction On-chip No Battery • Small Size • Factory Laser Programmable ROM • Operating Temperature Range -40°C to +125°C • Radio Frequency RF 100 kHz to 450 kHz • Transmission options Code Length 128, 96, 64, 32 bits Bitrate [bit/s] RF/8, RF/16, RF/32, RF/40, RF/50, RF/64, RF/80, RF/100, RF/128 Modulation FSK, PSK, BIPH, Manchester, BIPH-FSK • FDX-B Compatible Coding Possible ISO 11784/ ISO 11785 Figure Application RF transmitter and interrogator IDIC e5530 128-bit Read-only for RF Identification e5530 The e5530 is part of a closed coupled identification system. It receives power from an RF transmitter which is coupled inductively to the frequency is typically 100 kHz to 450 kHz. Receiving RF, the responds with a data stream by damping the incoming RF via an internal load. This damping-in-turn can be detected by the interrogator. The identifying data are stored in a 128-bit PROM on the e5530, realized as an array of laser-programmable fuses. The logic block diagram for the e5530 is shown in figure The data are output bit-serially as a code of length 128, 96, 64 or 32 bits. The chips are factory-programmed with a unique code. Figure Block Diagram Analog front end Mod Load Coil Modulator FSK PSK BIPH Manchester Clock extractor Row decoder Data R7 R6 R5 R4 R3 R2 R1 R0 128-bit PROM Coil Rectifier Bitrate Column decoder Counter Chip Dimensions Figure Chip Size mm Coil 1 e5530 Coil 2 Pad 150 µ x 150 µ Metal 99% Al, 1% Si Padwindow 138 µ x 138 µ Thickness 15 mils Name Coil1 Coil2 Pad Window 138 x 138 µm2 138 x 138 µm2 Function 1st coil pad 2nd coil pad Figure Pinning SO8 Coil 2 1 8 Coil 1 e5530 Ordering Information Extended Type Number Data Package Modulation Rate ID Configuration Checksum Header Code SPQ Minimum Volume Minimum Order Volume e5530H-232-DOW e5530H-232-DIT e5530H-232-S8 DOW DIT SO8 Manchester RF/32 64-bit no checksum fixed and unique code 10 kpcs 10 kpcs 1120 10 kpcs 10 kpcs 1120 e5530H-zzz-DOW 1 e5530H-zzz-DIT 1 e5530H-zzz-S8 1 DOW DIT SO8 defined by customer Note: 1 Definition of customized part number basing on orders for first year volume 300 kpcs 2 Definition of header, ID code, checksum etc. according to customers data base 3 initial cost for customer specific laser-fusing 4 Lead time 3 month 5 Low volume customized applications may be covered by TK5551-PP programming. With identical features of TK5530H-zzz-PP possible > 600 kpcs p.a. > 600 kpcs p.a. > 400 kpcs p.a. Order Code The full order code for the e5530is e5530H-zzz-pkg or e5530G-zzz-pkg, where zzz is a customer specific number defined by Atmel. pkg package defines the delivery form - DOW factory programmed, tested unsawn, backlapped 15 mils wafers - DIT cutted chips in wafflepack Dice In Tray - S8 SO8-packaged parts Samples Atmel supplies e5530 samples, which are set to Manchester modulation at RF/32 with a 64-bit ID code order code e5530H-232 S8 Package Information Package SO8 Dimensions in mm technical drawings according to DIN specifications Atmel Headquarters Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 TEL 1 408 441-0311 FAX 1 408 487-2600 Europe Atmel SarL Route des Arsenaux 41 Casa Postale 80 CH-1705 Fribourg Switzerland TEL 41 26-426-5555 FAX 41 26-426-5500 Asia Atmel Asia, Ltd. Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimhatsui East Kowloon Hong Kong TEL 852 2721-9778 FAX 852 2722-1369 Japan Atmel Japan K.K. 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL 81 3-3523-3551 FAX 81 3-3523-7581 Atmel Operations Memory Atmel Corporate 2325 Orchard Parkway San Jose, CA 95131 TEL 1 408 436-4270 FAX 1 408 436-4314 Microcontrollers Atmel Corporate 2325 Orchard Parkway San Jose, CA 95131 TEL 1 408 436-4270 FAX 1 408 436-4314 Atmel Nantes La Chantrerie BP 70602 44306 Nantes Cedex 3, France TEL 33 2-40-18-18-18 FAX 33 2-40-18-19-60 ASIC/ASSP/Smart Cards Atmel Rousset Zone Industrielle 13106 Rousset Cedex, France TEL 33 4-42-53-60-00 FAX 33 4-42-53-60-01 Atmel Colorado Springs 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 1 719 576-3300 FAX 1 719 540-1759 Atmel Smart Card ICs Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland TEL 44 1355-803-000 FAX 44 1355-242-743 RF/Automotive Atmel Heilbronn Theresienstrasse 2 Postfach 3535 74025 Heilbronn, Germany TEL 49 71-31-67-0 FAX 49 71-31-67-2340 Atmel Colorado Springs 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 1 719 576-3300 FAX 1 719 540-1759 Biometrics/Imaging/Hi-Rel MPU/ High Speed Converters/RF Datacom Atmel Grenoble Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex, France TEL 33 4-76-58-30-00 FAX 33 4-76-58-34-80

PDF Datasheet Preview

• Low-power, Low-voltage CMOS
• Rectifier, Voltage Limiter, Clock Extraction On-chip No Battery
• Small Size
• Factory Laser Programmable ROM
• Operating Temperature Range -40°C to +125°C
• Radio Frequency RF 100 kHz to 450 kHz
• Transmission options

Code Length 128, 96, 64, 32 bits Bitrate [bit/s] RF/8, RF/16, RF/32, RF/40, RF/50, RF/64, RF/80, RF/100, RF/128

Modulation FSK, PSK, BIPH, Manchester, BIPH-FSK
• FDX-B Compatible Coding Possible ISO 11784/ ISO 11785

Figure Application

RF transmitter and
interrogator

IDIC
e5530
128-bit Read-only for RF Identification
e5530

The e5530 is part of a closed coupled identification system. It receives power from an RF transmitter which is coupled inductively to the frequency is typically 100 kHz to 450 kHz. Receiving RF, the responds with a data stream by damping the incoming RF via an internal load. This damping-in-turn can be detected by the interrogator. The identifying data are stored in a 128-bit PROM on the e5530, realized as an array of laser-programmable fuses. The logic block diagram for the e5530 is shown in figure The data are output bit-serially as a code of length 128, 96, 64 or 32 bits. The chips are factory-programmed with a unique code.

Figure Block Diagram

Analog front end Mod

Load

Coil

Modulator FSK PSK BIPH

Manchester

Clock
extractor

Row decoder

Data

R7 R6 R5 R4 R3 R2 R1 R0
128-bit PROM

Coil

Rectifier

Bitrate

Column decoder Counter

Chip Dimensions

Figure Chip Size mm

Coil 1
e5530

Coil 2

Pad 150 µ x 150 µ Metal 99% Al, 1% Si Padwindow 138 µ x 138 µ

Thickness 15 mils

Name Coil1 Coil2

Pad Window 138 x 138 µm2 138 x 138 µm2

Function 1st coil pad 2nd coil pad

Figure Pinning SO8

Coil 2 1
8 Coil 1
e5530
Ordering Information

Extended Type Number

Data Package Modulation Rate

ID Configuration Checksum Header Code

SPQ Minimum Volume

Minimum Order Volume
e5530H-232-DOW e5530H-232-DIT e5530H-232-S8

DOW DIT SO8

Manchester RF/32 64-bit
no checksum
fixed and unique code
10 kpcs 10 kpcs 1120
10 kpcs 10 kpcs 1120
e5530H-zzz-DOW 1 e5530H-zzz-DIT 1 e5530H-zzz-S8 1

DOW DIT SO8
defined by customer

Note:
1 Definition of customized part number basing on orders for first year volume 300 kpcs 2 Definition of header, ID code, checksum etc. according to customers data base 3 initial cost for customer specific laser-fusing 4 Lead time 3 month 5 Low volume customized applications may be covered by TK5551-PP programming. With identical features of TK5530H-zzz-PP possible
> 600 kpcs p.a. > 600 kpcs p.a. > 400 kpcs p.a.

Order Code

The full order code for the e5530is e5530H-zzz-pkg or e5530G-zzz-pkg, where zzz is a customer specific number defined by Atmel. pkg package defines the delivery form - DOW factory programmed, tested unsawn, backlapped 15 mils wafers - DIT cutted chips in wafflepack Dice In Tray - S8 SO8-packaged parts Samples Atmel supplies e5530 samples, which are set to Manchester modulation at RF/32 with a 64-bit ID code order code e5530H-232 S8

Package Information

Package SO8

Dimensions in mm
technical drawings according to DIN specifications

Atmel Headquarters

Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 TEL 1 408 441-0311 FAX 1 408 487-2600

Europe Atmel SarL Route des Arsenaux 41 Casa Postale 80 CH-1705 Fribourg Switzerland TEL 41 26-426-5555 FAX 41 26-426-5500

Asia Atmel Asia, Ltd. Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimhatsui East Kowloon Hong Kong TEL 852 2721-9778 FAX 852 2722-1369

Japan Atmel Japan K.K. 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL 81 3-3523-3551 FAX 81 3-3523-7581

Atmel Operations

Memory Atmel Corporate 2325 Orchard Parkway San Jose, CA 95131 TEL 1 408 436-4270 FAX 1 408 436-4314

Microcontrollers Atmel Corporate 2325 Orchard Parkway San Jose, CA 95131 TEL 1 408 436-4270 FAX 1 408 436-4314

Atmel Nantes La Chantrerie BP 70602 44306 Nantes Cedex 3, France TEL 33 2-40-18-18-18 FAX 33 2-40-18-19-60

ASIC/ASSP/Smart Cards Atmel Rousset Zone Industrielle 13106 Rousset Cedex, France TEL 33 4-42-53-60-00 FAX 33 4-42-53-60-01

Atmel Colorado Springs 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 1 719 576-3300 FAX 1 719 540-1759

Atmel Smart Card ICs Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland TEL 44 1355-803-000 FAX 44 1355-242-743

RF/Automotive Atmel Heilbronn Theresienstrasse 2 Postfach 3535 74025 Heilbronn, Germany TEL 49 71-31-67-0 FAX 49 71-31-67-2340

Atmel Colorado Springs 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 1 719 576-3300 FAX 1 719 540-1759

Biometrics/Imaging/Hi-Rel MPU/ High Speed Converters/RF Datacom

Atmel Grenoble Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex, France TEL 33 4-76-58-30-00 FAX 33 4-76-58-34-80

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived E5530H-232-S8 Datasheet file may be downloaded here without warranties.

Datasheet ID: E5530H-232-S8 519344