E1106

E1106 Datasheet


E1106

Part Datasheet
E1106 E1106 E1106 (pdf)
PDF Datasheet Preview
E1106

User Manual

The New Vision of TouchTM

Contents

E1106 User Manual
1 E1106 3 Introduction Contents of Kit
2 Setting Up the E1106 4
3 QT1106 Demo Software Introduction How to Use the E1106 QWheel/QSlide QT1106 Demo Main Window Setup Dialog Box

Wheel/Slider Area Keys AKS Modes Operating Modes Area General Low Power/Sync/Sleep Mode Other
4 E1106 Control Board Assembly Details 9 Circuit Diagram E1106 Control Board Assembly Components

List of Figures

Figure 1 E1106 Evaluation Assemblies and Control Board Figure 2 E1106 Figure 3 QT1106 Main Figure 4 QT1106 Setup Dialog Box Figure 5 E1106 Circuit Diagram Figure 6 E1106 Control Board Assembly Figure 7 QWheel Assembly Details Figure 8 QSlide Assembly

List of Tables

Table 1 QT1106 IC, 32-QFN U3
2 of 14
1 E1106 Overview

E1106 User Manual

Introduction

This kit is designed for the evaluation and development of applications using the QT1106 IC. The kit includes evaluation assemblies E1106 see Figure 1 , cables and QT1106 Demo software. Each E1106 assembly has a serial USB interface allowing connection to a computer for control and data viewing via QT1106 Demo computer software.

This unique IC allows designers to create speed or volume controls, using a wheel/slider and keys as the interface on the panel of an appliance or personal electronic device.

Refer also to the QT1106 datasheet.

Contents of Kit

E1106 QWheel Assembly

E1106 Control Board

Figure 1 E1106 Evaluation Assemblies and Control Board
3 of 14

E1106 User Manual
2 Setting Up the E1106

To prepare the E1106 for use, proceed as follows:

Connect the E1106 control board to the QWheel or QSlide evaluation assembly, ensuring correct orientation of the connector see Figure

Using the USB cable provided, connect the E1106 control board to the computer see Figure The LED on the E1106 is lit constantly to indicate that there is power to the board.

Install the QT1106 Demo software either method is acceptable:
a. Put the supplied CD in the CD drive of the computer. Copy the contents of the CD to the computer. Double-click the QT1106 Demo software to open it.
b. Go to point to the Support tab and click Download Archive. Click Software and then the QT1106 Demo link. A dialog box appears asking if you want to run or save the file that you are about to download. Click Run. This automatically downloads the software.

If a dialog box appears saying “The publisher could not be verified. Are you sure you want to run this software?” click Run.

QT1106 Demo software is displayed on the computer monitor see Figure 3, page

Note the E1106 QWheel and QSlide assemblies are supplied with a grounded transparent backplate that allows the assemblies to be operated while being handheld, without requiring recalibration. The backplate can be removed if required.

Control board should be component side up.

Connecting the E1106 Control Board to the E1106 QWheel or QSlide USB cable to computer

QWheel

Assembly
More datasheets: PCR120 | AK4705VQ | 350ALAA-622.080 | 1N4002SP TR | 1N4002SP BK | 1N4004SP TR | ELSH-F81G1-0LPNM-CG1G2 | ELSH-F81G1-0LPNM-CG2G3 | 1177 | D09P23A4UV00LF


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived E1106 Datasheet file may be downloaded here without warranties.

Datasheet ID: E1106 519339