The ATR4256 is a synthesizer IC for FM receivers and an AM up-conversion system in BiCMOS technology. Together with the AM/FM IC ATR4258 or ATR4255, it comprises a complete AM/FM car radio front-end, which is also recommended for RDS Radio Data System applications. It is controlled by a 3-wire bus and also contains switches and Digital to Analog Converters DACs for software-controlled alignment of the AM/FM tuner. The ATR4256 is the pin-compatible successor IC of U4256BM-R.
Part | Datasheet |
---|---|
![]() |
ATR4256-TKQY (pdf) |
Related Parts | Information |
---|---|
![]() |
ATR4256-TKSY |
PDF Datasheet Preview |
---|
• Reference Oscillator up to 15 MHz Tuned • Oscillator Buffer Output for AM Up/Down Conversion • Two Programmable 16-bit Dividers • Fine-tuning Steps Possible • Fast Response Time Due to Integrated Loop Push-pull Stage • 3-wire Bus Enable, Clock and Data 3V and 5V Microcontrollers Acceptable • Four Programmable Switching Outputs Open Drain • Three DACs for Software Controlled Tuner Alignment • Low-power Consumption • High Signal to Noise Ratio SNR • Integrated Band Gap Only One Supply Voltage Necessary The ATR4256 is a synthesizer IC for FM receivers and an AM up-conversion system in BiCMOS technology. Together with the AM/FM IC ATR4258 or ATR4255, it comprises a complete AM/FM car radio front-end, which is also recommended for RDS Radio Data System applications. It is controlled by a 3-wire bus and also contains switches and Digital to Analog Converters DACs for software-controlled alignment of the AM/FM tuner. The ATR4256 is the pin-compatible successor IC of U4256BM-R. Figure Block Diagram Tuning SWO1 SWO2 SWO3 SWO4 7 8 9 10 13 OSCIN 12 Oscillator OSCOUT 15 MX2LO OSC buffer CLK 16 3-wire DATA EN 18 interface Switching outputs DAC3 3-bit VRef DAC2 DAC1 5 DAC3 4 DAC2 3 DAC1 Rdivider DAC AM/FM VRef 19 FMOSCIN FMpreamp 20 GNDAN Ndivider Phase detector Band gap 14 Current sources GND VS 1 PDO Frequency Synthesizer for Radio Tuning ATR4256 Pin Configuration Figure Pinning SSO20 12 OSCOUT 11 GND 14 V5 13 OSCIN 16 DATA 15 MX2LO 17 CLK Ordering Information Extended Type Number ATR4256-TKSY ATR4256-TKQY Package Information Package SSO20 Dimensions in mm Package SSO20 Remarks Tube Taped and reeled technical drawings according to DIN specifications History 4867D-AUDR-01/08 • Section 9 “Operating Range” on page 15 changed 4867C-AUDR-10/07 • Put datasheet in the newest template • El. Char. table row changed 4867B-AUDR-06/06 • Put data sheet in a new template • Pb-free logo on page 1 deleted 20 ATR4256 Headquarters Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131 USA Tel 1 408 441-0311 Fax 1 408 487-2600 International Atmel Asia Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel 852 2721-9778 Fax 852 2722-1369 Atmel Europe Le Krebs 8, Rue Jean-Pierre Timbaud BP 309 78054 Saint-Quentin-en-Yvelines Cedex France Tel 33 1-30-60-70-00 Fax 33 1-30-60-71-11 Atmel Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel 81 3-3523-3551 Fax 81 3-3523-7581 Product Contact Web Site Literature Requests Technical Support Sales Contact Disclaimer The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. 2008 Atmel Corporation. All rights reserved. logo and combinations thereof, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others. |
More datasheets: IMN33188C | IMM23188C | IMN65188C | IMN261816M12 | IMN251816M12 | IMN23188C | IMM65188C | IMN62185P | IMN62185M12 | IMN351816M12 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ATR4256-TKQY Datasheet file may be downloaded here without warranties.