ATR2406-PNQW

ATR2406-PNQW Datasheet

ATR2406

Part	Datasheet
ATR2406-PNQW	ATR2406-PNQW (pdf)

PDF Datasheet Preview
ATR2406 Low-IF 2.4-GHz ISM Transceiver DATASHEET ● Fully integrated low IF receiver ● Fully integrated GFSK modulator for 72, 144, 288, 576 and 1152Kbits/s ● High sensitivity of typically due to integrated LNA ● High output power of typically +4dBm ● Multi-channel operation ● 95 channels ● Support frequency hopping ETSI and digital modulation FCC ● Supply-voltage range 2.9V to 3.6V unregulated ● Auxiliary voltage regulator on chip 3.2V to 4.6V ● Low current consumption ● Few low-cost external components ● Integrated ramp-signal generator and power control for an additional power amplifier ● Low profile lead-free plastic package QFN32 5mm x 5mm x 0.9mm ● RoHs compliant ● High-tech multi-user toys ● Wireless game controllers ● Telemetry ● Wireless audio/video ● Electronic point of sales ● Wireless head set ● FCC CFR47, part 15, ETSI EN 300 328, EN 300 440 and ARIB STD-T-66 compliant radio links 4779Q-ISM-09/14 The ATR2406 is a single chip RF transceiver intended for applications in the 2.4GHz ISM band. The QFN32-packaged IC is a complete transceiver including image rejection mixer, low IF filter, FM demodulator, RSSI, TX preamplifier, power-ramping generator for external power amplifier, integrated synthesizer, and a fully integrated VCO and TX filter. No mechanical adjustment is necessary in production. The RF transceiver offers a clock recovery function on-chip. Figure Block Diagram REG_DEC VREG REG_CTRL VS_REG IREF VREG_VCO VCO REG AUX REG AUX REG IR-Mixer RX_IN LIMITER RSSI DEMOD VS_SYN VS_IFD VS_IFA VS_RX/TX RX_DATA PA TX_OUT RAMP_OUT RAMP GEN Divider by 2 GAUSSIAN FILTER CTRL LOGIC RSSI CLOCK DATA ENABLE TEST1 TEST2 PU_REG PU_TRX RX_ON TX_ON nOLE CP REF_CLK TX_DATA VTUNE ATR2406 [DATASHEET] Pin Configuration Figure Pinning QFN32 - 5 x 5 PENABLE DATA CLOCK TX_DATA RX_DATA PU_TRX nOLE TX_ON PU_REG REF_CLK RSSI VS_IFD VS_IFA RX-CLOCK IC IREF 32 31 30 29 28 27 26 25 4 ATR2406 21 Ordering Information Extended Type Number ATR2406-PNQW Package Information Package QFN32 - 5x5 Remarks Taped and reeled, Pb-free Top View D PIN 1 ID 8 Side View technical drawings according to DIN specifications Dimensions in mm MOQ 6000 Bottom View D2 24 25 e Z 10:1 COMMON DIMENSIONS Unit of Measure = mm Symbol MIN NOM MAX NOTE Package Drawing Contact: Package QFN_5x5_32L Exposed pad 3.6x3.6 ATR2406 [DATASHEET] Recommended Footprint/Landing Pattern Figure Recommenced Footprint/Landing Pattern Table Recommended Footprint/Landing Pattern Signs Sign A B C a b c d e Size 3.2mm 1.2mm 0.3mm 1.1mm 0.3mm 0.2mm 0.55mm 0.5mm 24 ATR2406 [DATASHEET] 4779L-ISM-08/06 4779K-ISM-06/06 History • Section 11 “Ordering Information” on page 23 updated • Section 12 “Package Information” on page 23 updated • Section 11 “Ordering Information” on page 23 updated • Put datasheet in the latest template • Put datasheet in the latest template • Section 12 “Package Information” on page 22 updated • Put datasheet in the latest template • Table 9-1 “Bill of Materials” on page 19 updated • Table “Electrical Characteristics” on pages 6 to 8 updated • Section 10 “Appendix Current calculations for a remote control” on pages 20 to 21 updated • Table “Ordering Information” on page 22 updated • Minor corrections to grammar and style throughout document • Put datasheet in a new template • Table “Electrical Characteristics” on pages 6 to 8 updated • Section 10 “Appendix Current calculations for a remote control” on pages 20 to 21 added • Ordering information on page 22 updated ATR2406 [DATASHEET] Atmel Corporation 1600 Technology Drive, San Jose, CA 95110 USA T +1 408 F +1 408 Atmel logo and combinations thereof, Enabling Unlimited and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others. DISCLAIMER The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. SAFETY-CRITICAL, MILITARY, AND AUTOMOTIVE APPLICATIONS DISCLAIMER Atmel products are not designed for and will not be used in connection with any applications where the failure of such products would reasonably be expected to result in significant personal injury or death “Safety-Critical Applications” without an Atmel officer's specific written consent. Safety-Critical Applications include, without limitation, life support devices and systems, equipment or systems for the operation of nuclear facilities and weapons systems. Atmel products are not designed nor intended for use in military or aerospace applications or environments unless specifically designated by Atmel as military-grade. Atmel products are not designed nor intended for use in automotive applications unless specifically designated by Atmel as automotive-grade.

PDF Datasheet Preview

ATR2406

Low-IF 2.4-GHz ISM Transceiver

DATASHEET
● Fully integrated low IF receiver ● Fully integrated GFSK modulator for 72, 144, 288, 576 and 1152Kbits/s ● High sensitivity of typically due to integrated LNA ● High output power of typically +4dBm ● Multi-channel operation
● 95 channels ● Support frequency hopping ETSI and digital modulation FCC ● Supply-voltage range 2.9V to 3.6V unregulated ● Auxiliary voltage regulator on chip 3.2V to 4.6V ● Low current consumption ● Few low-cost external components ● Integrated ramp-signal generator and power control for an additional power amplifier ● Low profile lead-free plastic package QFN32 5mm x 5mm x 0.9mm ● RoHs compliant
● High-tech multi-user toys ● Wireless game controllers ● Telemetry ● Wireless audio/video ● Electronic point of sales ● Wireless head set ● FCC CFR47, part 15, ETSI EN 300 328, EN 300 440 and ARIB STD-T-66
compliant radio links
4779Q-ISM-09/14

The ATR2406 is a single chip RF transceiver intended for applications in the 2.4GHz ISM band. The QFN32-packaged IC is a complete transceiver including image rejection mixer, low IF filter, FM demodulator, RSSI, TX preamplifier, power-ramping generator for external power amplifier, integrated synthesizer, and a fully integrated VCO and TX filter. No mechanical adjustment is necessary in production. The RF transceiver offers a clock recovery function on-chip.

Figure Block Diagram

REG_DEC VREG REG_CTRL VS_REG IREF

VREG_VCO

VCO REG

AUX REG

AUX REG

IR-Mixer

RX_IN

LIMITER RSSI

DEMOD

VS_SYN VS_IFD VS_IFA VS_RX/TX

RX_DATA

PA TX_OUT

RAMP_OUT

RAMP GEN

Divider by 2

GAUSSIAN

FILTER

CTRL LOGIC

RSSI

CLOCK DATA ENABLE

TEST1 TEST2 PU_REG PU_TRX RX_ON TX_ON nOLE

CP REF_CLK TX_DATA VTUNE

ATR2406 [DATASHEET]

Pin Configuration

Figure Pinning QFN32 - 5 x 5

PENABLE DATA CLOCK TX_DATA RX_DATA PU_TRX nOLE TX_ON

PU_REG REF_CLK

RSSI VS_IFD VS_IFA RX-CLOCK

IC IREF
32 31 30 29 28 27 26 25
4 ATR2406 21
Ordering Information

Extended Type Number ATR2406-PNQW

Package Information

Package QFN32 - 5x5

Remarks Taped and reeled, Pb-free

Top View D

PIN 1 ID 8

Side View
technical drawings according to DIN specifications

Dimensions in mm

MOQ 6000

Bottom View D2
24 25 e

Z 10:1

COMMON DIMENSIONS Unit of Measure = mm

Symbol MIN NOM MAX NOTE

Package Drawing Contact:

Package QFN_5x5_32L Exposed pad 3.6x3.6

ATR2406 [DATASHEET]

Recommended Footprint/Landing Pattern

Figure Recommenced Footprint/Landing Pattern

Table Recommended Footprint/Landing Pattern Signs

Sign A B C a b c d e

Size 3.2mm 1.2mm 0.3mm 1.1mm 0.3mm 0.2mm 0.55mm 0.5mm
24 ATR2406 [DATASHEET]
4779L-ISM-08/06
4779K-ISM-06/06
History
• Section 11 “Ordering Information” on page 23 updated
• Section 12 “Package Information” on page 23 updated
• Section 11 “Ordering Information” on page 23 updated
• Put datasheet in the latest template
• Put datasheet in the latest template
• Section 12 “Package Information” on page 22 updated
• Put datasheet in the latest template
• Table 9-1 “Bill of Materials” on page 19 updated
• Table “Electrical Characteristics” on pages 6 to 8 updated
• Section 10 “Appendix Current calculations for a remote control” on pages 20 to 21
updated
• Table “Ordering Information” on page 22 updated
• Minor corrections to grammar and style throughout document
• Put datasheet in a new template
• Table “Electrical Characteristics” on pages 6 to 8 updated
• Section 10 “Appendix Current calculations for a remote control” on pages 20 to 21
added
• Ordering information on page 22 updated

ATR2406 [DATASHEET]

Atmel Corporation
1600 Technology Drive, San Jose, CA 95110 USA T +1 408

F +1 408

Atmel logo and combinations thereof, Enabling Unlimited and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

DISCLAIMER The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.

SAFETY-CRITICAL, MILITARY, AND AUTOMOTIVE APPLICATIONS DISCLAIMER Atmel products are not designed for and will not be used in connection with any applications where the failure of such products would reasonably be expected to result in significant personal injury or death “Safety-Critical Applications” without an Atmel officer's specific written consent. Safety-Critical Applications include, without limitation, life support devices and systems, equipment or systems for the operation of nuclear facilities and weapons systems. Atmel products are not designed nor intended for use in military or aerospace applications or environments unless specifically designated by Atmel as military-grade. Atmel products are not designed nor intended for use in automotive applications unless specifically designated by Atmel as automotive-grade.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ATR2406-PNQW Datasheet file may be downloaded here without warranties.

Datasheet ID: ATR2406-PNQW 519287