Atmel ATPL220A
Part | Datasheet |
---|---|
![]() |
ATPL220A-A1U-Y (pdf) |
PDF Datasheet Preview |
---|
Atmel ATPL220A PRIME compliant Power Line Communications Modem SUMMARY DATASHEET Features • Modem • Power Line Carrier Modem for 50 and 60 Hz mains • 97-carrier OFDM PRIME compliant • Baud rate Selectable 21400 to 128600 bps • Differential BPSK, QPSK, 8-PSK modulations • Memory • 32Kbytes on-chip SRAM • Automatic Gain Control and signal amplitude tracking • Embedded on-chip DMAs • Media Access Control • Viterbi decoding and CRC PRIME compliant • 128-bit AES encryption • Channel sensing and collision pre-detection • Package • 120-lead LQFP, 14 x 14 mm, pitch mm • Pb-free and RoHS compliant • Typical Applications • Automated Meter Reading AMR & Advanced Meter Management AMM • Street lighting • Home Automation 43004A-ATPL-03/12 ATLP220A is a PRIME Powerline-Related Intelligent Metering Evolution compliant ASIC specifically designed for PLC Base Nodes implementation. Systems using this ASIC support both mono-phase and multi-phase PLC injection. Mono-phase injection is achieved by means of a single ATLP220A ASIC, whereas several ATLP220A can be combined to achieve multi-phase injection based on Atmel MIMO technology. The combination of multi-phase injection and Atmel MIMO technology increases PRIME Base Nodes performance, resulting in outstanding robustness and network coverage. ATLP220A has been conceived to be easily managed by an external microcontroller by means of an SPI interface. The external microcontroller implements Base Node upper layers as specified in PRIME while ATLP220A carries out PHY layer functionalities. Line Coupling front end design is extremely simplified, bringing off a very low cost bill of materials. Atmel ATPL220A [summary datasheet] 43004A-ATPL-03/12 Block Diagram Figure ATPL220A 120-pin Block Diagram D_INIT RSTA Reset Interface 32KB On-Chip SRAM JTAG Boundary Scan TDI TDO TCK TRST TMS SPI_CLK MOSI MISO /SS RQ_MIC_STOP /EXT_INT CLKA CLKB Memory Controller SPI Bridge MEMORY BUS Clock Interface MAC Coprocessor Power Management OFDM PLC Modem VDD VSSO LDO_PD VDEO AVD AVS VSENSE PSENSE EMIT 1:12 AFE_TXRX AFE_HIMP AGC0 VNR AGC1 VIN VRH VRL Atmel ATPL220A [summary datasheet] 43004A-ATPL-03/12 Package and Pinout Ordering Information Table Atmel ATPL220A Ordering Codes Atmel Ordering Code ATPL220A-A1U-Y Package 120 LQFP Package Type Pb-Free Temperature Range Industrial -40ºC to 85º Atmel Designator AT=Atmel Product Family PL=Power Line Communications Device Designator ATPL220A-A1U-Yxx Customer marking Shipping Carrier Option Y = Tray Package Device Grade or Wafer/Die Thickness U = Lead free Pb-free Industrial temperature range -40°C to +85°C Package Option A1 = 120LQFP Atmel ATPL220A [summary datasheet] 43004A-ATPL-03/12 Date 30/03/2012 Comments Initial release Atmel ATPL220A [summary datasheet] 43004A-ATPL-03/12 Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131 USA Tel +1 408 441-0311 Fax +1 408 487-2600 Atmel Asia Limited Unit 01-5 & 16, 19F BEA Tower, Millennium City 5 418 Kwun Tong Road Kwun Tong, Kowloon HONG KONG Tel +852 2245-6100 Fax +852 2722-1369 Atmel Munich GmbH Business Campus Parkring 4 D-85748 Garching b. Munich GERMANY Tel +49 89-31970-0 Fax +49 89-3194621 Atmel Japan G.K. 16F Shin-Osaki Kangyo Building 1-6-4 Osaki Shinagawa-ku, Tokyo 141-0032 JAPAN Tel +81 3 6417-0300 Fax +81 3 6417-0370 logo and combinations thereof, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others. Disclaimer The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. |
More datasheets: TB1500L-13 | TB0720L-13 | TB3100L-13 | TB1800L-13 | 1754 | FDS6898A_NF40 | FDS6898A | CMD11504FY | CMD11504A | CMD11504PG |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ATPL220A-A1U-Y Datasheet file may be downloaded here without warranties.