ATF16V8B-15PC

ATF16V8B-15PC Datasheet

Device ATF16V8B

Part	Datasheet
ATF16V8B-15PC	ATF16V8B-15PC (pdf)

Related Parts	Information
ATF16V8BQL-15JC	ATF16V8BQL-15JC
ATF16V8BQ-10XC	ATF16V8BQ-10XC
ATF16V8BQL-15PC	ATF16V8BQL-15PC
ATF16V8B-10PI	ATF16V8B-10PI
ATF16V8BQ-10JC	ATF16V8BQ-10JC
ATF16V8B-10SC	ATF16V8B-10SC
ATF16V8B-10PC	ATF16V8B-10PC
ATF16V8B-10JC	ATF16V8B-10JC
ATF16V8B-10JI	ATF16V8B-10JI
ATF16V8BQ-10PC	ATF16V8BQ-10PC
ATF16V8B-10SI	ATF16V8B-10SI
ATF16V8B-15JI	ATF16V8B-15JI
ATF16V8B-15PI	ATF16V8B-15PI
ATF16V8B-15SI	ATF16V8B-15SI
ATF16V8B-15JC	ATF16V8B-15JC
ATF16V8BQL-15JI	ATF16V8BQL-15JI
ATF16V8BQL-15PI	ATF16V8BQL-15PI
ATF16V8BQL-15SI	ATF16V8BQL-15SI
ATF16V8BQL-15XC	ATF16V8BQL-15XC
ATF16V8BQ-10SC	ATF16V8BQ-10SC
ATF16V8BQL-15XI	ATF16V8BQL-15XI
ATF16V8B-15SC	ATF16V8B-15SC
ATF16V8BQL-15SC	ATF16V8BQL-15SC

PDF Datasheet Preview
• Industry-standard Architecture Emulates Many 20-pin Low-cost Easy-to-use Software Tools • High-speed Electrically-erasable Programmable Logic Devices ns Maximum Pin-to-pin Delay • Several Power Saving Options Device ATF16V8B ICC, Standby 50 mA ICC, Active 55 mA ATF16V8BQ ATF16V8BQL 35 mA 5 mA 40 mA 20 mA • CMOS and TTL Compatible Inputs and Outputs Input and I/O Pull-up Resistors • Advanced Flash Technology Reprogrammable 100% Tested • High-reliability CMOS Process 20 Year Data Retention 100 Erase/Write Cycles 2,000V ESD Protection 200 mA Latchup Immunity • Commercial, and Industrial Temperature Ranges • Dual-in-line and Surface Mount Packages in Standard Pinouts • PCI-compliant Block Diagram Highperformance EE PLD ATF16V8B ATF16V8BQ ATF16V8BQL Pin Configurations All Pinouts Top View Pin Name Function Clock Logic Inputs Bi-directional Buffers Output Enable +5V Supply TSSOP I/CLK 1 I1 2 I2 3 I3 4 I4 5 I5 6 I6 7 I7 8 I8 9 GND 10 20 VCC 19 I/O 18 I/O 17 I/O 16 I/O 15 I/O 14 I/O 13 I/O 12 I/O 11 I9/OE DIP/SOIC PLCC 3 I2 2 I1 1 I/CLK 20 VCC 19 I/O I/CLK 1 I1 2 I2 3 I3 4 I4 5 I5 6 I6 7 I7 8 I8 9 GND 10 20 VCC 19 I/O 18 I/O 17 I/O 16 I/O 15 I/O 14 I/O 13 I/O 12 I/O 11 I9/OE I3 4 I4 5 I5 6 I6 7 I7 8 18 I/O 17 I/O 16 I/O 15 I/O 14 I/O I8 9 GND 10 I9/OE 11 I/O 12 I/O 13 The ATF16V8B is a high-performance CMOS electricallyerasable programmable logic device PLD that utilizes Atmel’s proven electrically-erasable Flash memory technology. Speeds down to ns are offered. All speed ranges are specified over the full 5V ± 10% range for industrial temperature ranges, and 5V ± 5% for commercial temperature ranges. Several low-power options allow selection of the best solution for various types of power-limited applications. Each of these options significantly reduces total system power and enhances system reliability. See ordering information for valid part numbers and speed grades. Shaded parts are obsolete with a last time buy date of 19 August Min Max 0 16 8 45 50 62 Min Max 0 24 12 37 40 41 Units ns ns MHz ATF16V8B QL Input Test Waveforms and Measurement Levels: ATF16V8B QL Output Test Loads: Commercial tR, tF < 5 ns 10% to 90% Pin Capacitance f = 1 MHz, T = 25°C 1 Units Conditions COUT Note: VIN = 0 V VOUT = 0 V Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested. Power-up Reset The registers in the ATF16V8Bs are designed to reset during power-up. At a point delayed slightly from VCC crossing VRST, all registers will be reset to the low state. As a result, the registered output state will always be high on power-up. This feature is critical for state machine initialization. However, due to the asynchronous nature of reset and the uncertainty of how VCC actually rises in the system, the following conditions are required: The VCC rise must be monotonic, After reset occurs, all input and feedback setup times must be met before driving the clock pin high, and The clock must remain stable during tPR. Preload of Registered Outputs The ATF16V8B’s registers are provided with circuitry to allow loading of each register with either a high or a low. This feature will simplify testing since any state can be forced into the registers to control test sequencing. A JEDEC file with preload is generated when a source file with vectors is compiled. Once downloaded, the JEDEC file preload sequence will be done automatically by most of the approved programmers after the programming. Parameter tPR VRST Power-up Reset Time Power-up Reset Voltage Typ Max Units 600 1,000 Security Fuse Usage A single fuse is provided to prevent unauthorized copying of the ATF16V8B fuse patterns. Once programmed, fuse verify and preload are inhibited. However, the 64-bit User Signature remains accessible. The security fuse should be programmed last, as its effect is immediate. Electronic Signature Word ATF16V8B Ordering Information Ordering Code Package ATF16V8B-10JC ATF16V8B-10PC ATF16V8B-10SC ATF16V8B-10XC 20J 20P3 20S 20X ATF16V8B-10JI ATF16V8B-10PI ATF16V8B-10SI ATF16V8B-10XI 20J 20P3 20S 20X ATF16V8B-15JC ATF16V8B-15PC ATF16V8B-15SC ATF16V8B-15XC 20J 20P3 20S 20X ATF16V8B-15JI ATF16V8B-15PI ATF16V8B-15SI ATF16V8B-15XI 20J 20P3 20S 20X ATF16V8B-25JC ATF16V8B-25PC ATF16V8B-25SC ATF16V8B-25XC 20J 20P3 20S 20X Note: ATF16V8B-25JI ATF16V8B-25PI 20P3 ATF16V8B-25SI ATF16V8B-25XI Shaded parts are obsolete with a last time buy date of 19 August Operation Range Commercial 0°C to 70°C Industrial -40°C to 85°C Commercial 0°C to 70°C Industrial -40°C to 85°C Commercial 0°C to 70°C Industrial -40°C to 85°C Using “C” Product for Industrial To use commercial product for Industrial temperature ranges, down-grade one speed grade from the “I” to the “C” device 7 ns “C” = 10 ns “I” and de-rate power by 20J 20P3 20S 20X Package Type 20-lead, Plastic J-leaded Chip Carrier PLCC 20-lead, Wide, Plastic Dual Inline Package PDIP 20-lead, Wide, Plastic Gull-wing Small Outline SOIC 20-lead, mm Wide, Plastic Thin Shrink Small Outline TSSOP ATF16V8B QL ATF16V8B QL ATF16V8BQ and ATF16V8BQL Ordering Information tPD ns tS ns tCO ns Ordering Code Package ATF16V8BQ-10JC ATF16V8BQ-10PC ATF16V8BQ-10SC ATF16V8BQ-10XC 20J 20P3 20S 20X ATF16V8BQL-15JC ATF16V8BQL-15PC ATF16V8BQL-15SC ATF16V8BQL-15XC 20J 20P3 20S 20X ATF16V8BQL-15JI ATF16V8BQL-15PI ATF16V8BQL-15SI ATF16V8BQL-15XI 20J 20P3 20S 20X ATF16V8BQL-25JC ATF16V8BQL-25PC ATF16V8BQL-25SC ATF16V8BQL-25XC 20J 20P3 20S 20X Note: ATF16V8BQL-25JI ATF16V8BQL-25PI 20P3 ATF16V8BQL-25SI ATF16V8BQL-25XI Shaded parts are obsolete with a last time buy date of 11 August Operation Range Commercial 0°C to 70°C Commercial 0°C to 70°C Industrial -40°C to 85°C Commercial 0°C to 70°C Industrial -40°C to 85°C Using “C” Product for Industrial To use commercial product for Industrial temperature ranges, down-grade one speed grade from the “I” to the “C” device 7 ns “C” = 10 ns “I” and de-rate power by 20J 20P3 20S 20X Package Type 20-lead, Plastic J-leaded Chip Carrier PLCC 20-lead, Wide, Plastic Dual Inline Package PDIP 20-lead, Wide, Plastic Gull-Wing Small Outline SOIC 20-lead, mm Wide, Plastic Thin Shrink Small Outline TSSOP Packaging Information 20J, 20-lead, Plastic J-Leaded Chip Carrier PLCC Dimensions in Inches and Millimeters JEDEC STANDARD MS-018 AA 20S, 20-lead, Wide, Plastic Gull-Wing Small Outline SOIC Dimensions in Inches and Millimeters PIN 1 0 REF 8 ATF16V8B QL 20P3, 20-lead, Wide, Plastic Dual Inline Package PDIP Dimensions in Inches and Millimeters JEDEC STANDARD MS-001 AD SEATING PLANE 0 REF 15 20X, 20-lead, mm Wide, Plastic Thin Shrink Small Outline TSSOP Dimensions in Millimeters and Inches PIN 1 ID 0 REF 8 Atmel Headquarters

PDF Datasheet Preview

• Industry-standard Architecture Emulates Many 20-pin Low-cost Easy-to-use Software Tools
• High-speed Electrically-erasable Programmable Logic Devices ns Maximum Pin-to-pin Delay
• Several Power Saving Options

Device ATF16V8B

ICC, Standby 50 mA

ICC, Active 55 mA

ATF16V8BQ ATF16V8BQL
35 mA 5 mA
40 mA 20 mA
• CMOS and TTL Compatible Inputs and Outputs Input and I/O Pull-up Resistors
• Advanced Flash Technology Reprogrammable 100% Tested
• High-reliability CMOS Process 20 Year Data Retention 100 Erase/Write Cycles 2,000V ESD Protection 200 mA Latchup Immunity
• Commercial, and Industrial Temperature Ranges
• Dual-in-line and Surface Mount Packages in Standard Pinouts
• PCI-compliant

Block Diagram

Highperformance EE PLD

ATF16V8B ATF16V8BQ ATF16V8BQL

Pin Configurations

All Pinouts Top View

Pin Name Function

Clock

Logic Inputs

Bi-directional Buffers

Output Enable
+5V Supply

TSSOP

I/CLK 1 I1 2 I2 3 I3 4 I4 5 I5 6 I6 7 I7 8 I8 9

GND 10
20 VCC 19 I/O 18 I/O 17 I/O 16 I/O 15 I/O 14 I/O 13 I/O 12 I/O 11 I9/OE

DIP/SOIC

PLCC
3 I2 2 I1 1 I/CLK 20 VCC 19 I/O

I/CLK 1 I1 2 I2 3 I3 4 I4 5 I5 6 I6 7 I7 8 I8 9

GND 10
20 VCC 19 I/O 18 I/O 17 I/O 16 I/O 15 I/O 14 I/O 13 I/O 12 I/O 11 I9/OE

I3 4 I4 5 I5 6 I6 7 I7 8
18 I/O 17 I/O 16 I/O 15 I/O 14 I/O

I8 9 GND 10 I9/OE 11

I/O 12 I/O 13

The ATF16V8B is a high-performance CMOS electricallyerasable programmable logic device PLD that utilizes Atmel’s proven electrically-erasable Flash memory technology. Speeds down to ns are offered. All speed ranges are specified over the full 5V ± 10% range for industrial temperature ranges, and 5V ± 5% for commercial temperature ranges.

Several low-power options allow selection of the best solution for various types of power-limited applications. Each of
these options significantly reduces total system power and enhances system reliability.
See ordering information for valid part numbers and speed grades.

Shaded parts are obsolete with a last time buy date of 19 August

Min Max
0 16 8
45 50 62

Min Max
0 24 12
37 40 41

Units ns
ns MHz

ATF16V8B QL

Input Test Waveforms and Measurement Levels:

ATF16V8B QL

Output Test Loads:

Commercial
tR, tF < 5 ns 10% to 90%

Pin Capacitance
f = 1 MHz, T = 25°C 1

Units

Conditions

COUT Note:

VIN = 0 V

VOUT = 0 V

Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested.

Power-up Reset

The registers in the ATF16V8Bs are designed to reset during power-up. At a point delayed slightly from VCC crossing VRST, all registers will be reset to the low state. As a result, the registered output state will always be high on power-up.

This feature is critical for state machine initialization. However, due to the asynchronous nature of reset and the uncertainty of how VCC actually rises in the system, the following conditions are required:

The VCC rise must be monotonic, After reset occurs, all input and feedback setup
times must be met before driving the clock pin high, and

The clock must remain stable during tPR.

Preload of Registered Outputs

The ATF16V8B’s registers are provided with circuitry to allow loading of each register with either a high or a low. This feature will simplify testing since any state can be forced into the registers to control test sequencing. A JEDEC file with preload is generated when a source file with vectors is compiled. Once downloaded, the JEDEC file preload sequence will be done automatically by most of the approved programmers after the programming.

Parameter tPR VRST

Power-up Reset Time

Power-up Reset Voltage

Typ Max Units
600 1,000

Security Fuse Usage

A single fuse is provided to prevent unauthorized copying of the ATF16V8B fuse patterns. Once programmed, fuse verify and preload are inhibited. However, the 64-bit User Signature remains accessible.

The security fuse should be programmed last, as its effect is immediate.

Electronic Signature Word
ATF16V8B Ordering Information
Ordering Code

Package

ATF16V8B-10JC ATF16V8B-10PC ATF16V8B-10SC ATF16V8B-10XC
20J 20P3 20S 20X

ATF16V8B-10JI ATF16V8B-10PI ATF16V8B-10SI ATF16V8B-10XI
20J 20P3 20S 20X

ATF16V8B-15JC

ATF16V8B-15PC

ATF16V8B-15SC

ATF16V8B-15XC
20J 20P3 20S 20X

ATF16V8B-15JI ATF16V8B-15PI ATF16V8B-15SI ATF16V8B-15XI
20J 20P3 20S 20X

ATF16V8B-25JC ATF16V8B-25PC ATF16V8B-25SC ATF16V8B-25XC
20J 20P3 20S 20X

Note:

ATF16V8B-25JI

ATF16V8B-25PI
20P3

ATF16V8B-25SI

ATF16V8B-25XI

Shaded parts are obsolete with a last time buy date of 19 August

Operation Range Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Using “C” Product for Industrial

To use commercial product for Industrial temperature ranges, down-grade one speed grade from the “I” to the “C” device 7 ns “C” = 10 ns “I” and de-rate power by
20J 20P3 20S 20X

Package Type 20-lead, Plastic J-leaded Chip Carrier PLCC 20-lead, Wide, Plastic Dual Inline Package PDIP 20-lead, Wide, Plastic Gull-wing Small Outline SOIC 20-lead, mm Wide, Plastic Thin Shrink Small Outline TSSOP

ATF16V8B QL

ATF16V8B QL
ATF16V8BQ and ATF16V8BQL Ordering Information
tPD ns
tS ns
tCO ns
Ordering Code

Package

ATF16V8BQ-10JC ATF16V8BQ-10PC ATF16V8BQ-10SC ATF16V8BQ-10XC
20J 20P3 20S 20X

ATF16V8BQL-15JC ATF16V8BQL-15PC ATF16V8BQL-15SC ATF16V8BQL-15XC
20J 20P3 20S 20X

ATF16V8BQL-15JI ATF16V8BQL-15PI ATF16V8BQL-15SI ATF16V8BQL-15XI
20J 20P3 20S 20X

ATF16V8BQL-25JC ATF16V8BQL-25PC ATF16V8BQL-25SC ATF16V8BQL-25XC
20J 20P3 20S 20X

Note:

ATF16V8BQL-25JI

ATF16V8BQL-25PI
20P3

ATF16V8BQL-25SI

ATF16V8BQL-25XI

Shaded parts are obsolete with a last time buy date of 11 August

Operation Range Commercial 0°C to 70°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Using “C” Product for Industrial

To use commercial product for Industrial temperature ranges, down-grade one speed grade from the “I” to the “C” device 7 ns “C” = 10 ns “I” and de-rate power by
20J 20P3 20S 20X

Package Type 20-lead, Plastic J-leaded Chip Carrier PLCC 20-lead, Wide, Plastic Dual Inline Package PDIP 20-lead, Wide, Plastic Gull-Wing Small Outline SOIC 20-lead, mm Wide, Plastic Thin Shrink Small Outline TSSOP

Packaging Information
20J, 20-lead, Plastic J-Leaded Chip Carrier PLCC Dimensions in Inches and Millimeters

JEDEC STANDARD MS-018 AA
20S, 20-lead, Wide, Plastic Gull-Wing Small Outline SOIC Dimensions in Inches and Millimeters

PIN 1
0 REF 8

ATF16V8B QL
20P3, 20-lead, Wide, Plastic Dual Inline Package PDIP Dimensions in Inches and Millimeters

JEDEC STANDARD MS-001 AD

SEATING PLANE
0 REF 15
20X, 20-lead, mm Wide, Plastic Thin Shrink Small Outline TSSOP Dimensions in Millimeters and Inches

PIN 1 ID
0 REF 8

Atmel Headquarters

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ATF16V8B-15PC Datasheet file may be downloaded here without warranties.

Datasheet ID: ATF16V8B-15PC 519254