ATA6836C-PXQW 19

ATA6836C-PXQW 19 Datasheet

and Power Supply Fail • Serial Data Interface • Operation Voltage up to 40V • Daisy Chaining Possible • Serial Interface 5V Compatible, up to 2MHz Clock Frequency • SO28 or QFN24 Power Package

Part	Datasheet
ATA6836C-PXQW 19	ATA6836C-PXQW 19 (pdf)

Related Parts	Information
ATA6836-DK	ATA6836-DK
ATA6836C-TIQY	ATA6836C-TIQY
ATA6836-TIQY	ATA6836-TIQY
ATA6836C-TIQY-19	ATA6836C-TIQY-19
ATA6836-PXQW 19	ATA6836-PXQW 19
ATA6836C-PXQW	ATA6836C-PXQW

PDF Datasheet Preview
• Six Half-bridge Outputs Formed by Six High-side and Six Low-side Drivers • Capable of Switching all Kinds of Loads Such as DC Motors, Bulbs, Resistors, Capacitors and Inductors • RDSon Typically at 25°C, Maximum at 150°C • Up to 650-mA Output Current • Very Low Quiescent Current IS < 20µA in Standby Mode • Outputs Short-circuit Protected • Overtemperature Prewarning and Protection • Undervoltage Protection • Various Diagnosis Functions Such as Shorted Output, Open Load, Overtemperature and Power Supply Fail • Serial Data Interface • Operation Voltage up to 40V • Daisy Chaining Possible • Serial Interface 5V Compatible, up to 2MHz Clock Frequency • SO28 or QFN24 Power Package The ATA6836 is a fully protected hex half-bridge driver designed in Smart Power SOI technology, used to control up to six different loads by a microcontroller in automotive and industrial applications. Each of the six high-side and six low-side drivers is capable of driving currents up to 650mA. The drivers are internally connected to form six half-bridges and can be controlled separately from a standard serial data interface. Therefore, all kinds of loads, such as bulbs, resistors, capacitors and inductors, can be combined. The IC especially supports the application of H-bridges to drive DC motors. Protection is guaranteed in terms of short-circuit conditions, overtemperature and undervoltage. Various diagnosis functions and a very low quiescent current in standby mode make a wide range of applications possible. Automotive qualification referring to conducted interferences, EMC protection and ESD protection gives added value and enhanced quality for the exacting requirements of automotive applications. Hex Half-bridge Driver with Serial Input Control Atmel ATA6836 Atmel ATA6836C Figure Block Diagram SO28 DI 26 CLK 25 CS 24 INH 17 DO 18 S OH L H L H L H L H L H L S SC LSSSS SSS S SS S R I T D6 6 5 4 3 2 1 R Input register Ouput register Serial interface P I S H L H L H LH L H L H L T S NC S SS S P F HD 6 5 4 43 3 2 1 Fault Detect Fault Detect Fault Detect Fault Detect Fault Detect Fault Detect Fault Detect Fault Detect Fault Detect Fault Detect Fault Detect Fault Detect 15, 16 13, 14 11, 12 OUT1 OUT2 OUT3 3, 4 OUT4 27, 28 OUT5 OUT6 Ordering Information Extended Type Number ATA6836-TIQY ATA6836C-TIQY ATA6836-PXQW ATA6836C-PXQW Package Information SO28 Package SO28 QFN24 Remarks Taped and reeled, Pb-free Taped and reeled, Pb-free Taped and reeled, Pb-free Taped and reeled, Pb-free Package SO28 Dimensions in mm technical drawings according to DIN specifications 18 Atmel ATA6836 Atmel ATA6836 QFN24 Package QFN 24 - 5 x 5 Exposed pad x acc. JEDEC OUTLINE No. MO-220 Dimensions in mm Not indicated tolerances Drawing-No. Issue 1; 19 18 13 12 nom. technical drawings according to DIN specifications History 4952J-AUTO-03/11 • Section “Application Notes” on page 17 changed 4952I-AUTO-08/10 • Table 2-1 “Pin Description SO28” on page 4 changed • Ordering Information page 19 changed 4952H-AUTO-02/10 • Section 7 “Electrical Characteristics” numbers and on page 13 changed 4952G-AUTO-12/09 • Section 7 “Electrical Characteristics” number on page 11 changed 4952F-AUTO-07/09 • Put datasheet in a new template • Section 4 “Absolute Maximum Ratings” on pag 10 changed • Section 7 “Electrical Charcteristics” number on page 11 added • Features on page 1 changed • Table 2-1 “Pin Description SO28” on page 4 changed • Table 2-2 “Pin Description QFN24” on pages 5 to 6 changed 4952E-AUTO-10/08 • Section 4 “Absolute Maximum Ratings” on page 10 changed • Section 6 “Operating Range” on page 10 changed • Section 7 “Electrical Characteristics” on pages 11 to 13 changed • Section 8 “Serial Interface Timing” on page 14 changed • Section 9 “Noise and Surge Immunity” on page 16 changed 4952D-AUTO-10/07 • Section 11 “Ordering Information” on page 18 changed 4952C-AUTO-09/07 • Section 7 “Electrical Characteristics” numbers and on page 12 changed • Section 9 “Noise and Surge Immunity” on page 16 changed 4952B-AUTO-07/07 • Put datasheet in a new template • Section 7 “Electrical Characteristics” numbers and on pages 11 to 13 changed 20 Atmel ATA6836 Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131 USA Tel +1 408 441-0311 Fax +1 408 487-2600 Atmel Asia Limited Unit 01-5 & 16, 19/F BEA Tower, Millennium City 5 418 Kwun Tong Road Kwun Tong, Kowloon HONG KONG Tel +852 2245-6100 Fax +852 2722-1369 Atmel Munich GmbH Business Campus Parkring 4 D-85748 Garching b. Munich GERMANY Tel +49 89-31970-0 Fax +49 89-3194621 Atmel Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 JAPAN Tel +81 3 3523-3551 Fax +81 3 3523-7581 Atmel logo and combinations thereof, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others. Disclaimer The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.

PDF Datasheet Preview

• Six Half-bridge Outputs Formed by Six High-side and Six Low-side Drivers
• Capable of Switching all Kinds of Loads Such as DC Motors, Bulbs, Resistors,

Capacitors and Inductors
• RDSon Typically at 25°C, Maximum at 150°C
• Up to 650-mA Output Current
• Very Low Quiescent Current IS < 20µA in Standby Mode
• Outputs Short-circuit Protected
• Overtemperature Prewarning and Protection
• Undervoltage Protection
• Various Diagnosis Functions Such as Shorted Output, Open Load, Overtemperature
and Power Supply Fail
• Serial Data Interface
• Operation Voltage up to 40V
• Daisy Chaining Possible
• Serial Interface 5V Compatible, up to 2MHz Clock Frequency
• SO28 or QFN24 Power Package

The ATA6836 is a fully protected hex half-bridge driver designed in Smart Power SOI technology, used to control up to six different loads by a microcontroller in automotive and industrial applications.

Each of the six high-side and six low-side drivers is capable of driving currents up to 650mA. The drivers are internally connected to form six half-bridges and can be controlled separately from a standard serial data interface. Therefore, all kinds of loads, such as bulbs, resistors, capacitors and inductors, can be combined. The IC especially supports the application of H-bridges to drive DC motors.

Protection is guaranteed in terms of short-circuit conditions, overtemperature and undervoltage. Various diagnosis functions and a very low quiescent current in standby mode make a wide range of applications possible.

Automotive qualification referring to conducted interferences, EMC protection and ESD protection gives added value and enhanced quality for the exacting requirements of automotive applications.

Hex Half-bridge Driver with Serial Input Control

Atmel ATA6836 Atmel ATA6836C

Figure Block Diagram SO28

DI 26

CLK 25

CS 24

INH 17

DO 18

S OH L H L H L H L H L H L S SC LSSSS SSS S SS S R I T D6 6 5 4 3 2 1 R

Input register Ouput register

Serial interface

P I S H L H L H LH L H L H L T S NC S SS S P F HD 6 5 4 43 3 2 1

Fault Detect

Fault Detect

Fault Detect

Fault Detect

Fault Detect

Fault Detect

Fault Detect

Fault Detect

Fault Detect

Fault Detect

Fault Detect

Fault Detect
15, 16
13, 14
11, 12

OUT1

OUT2

OUT3
3, 4 OUT4
27, 28

OUT5

OUT6
Ordering Information

Extended Type Number ATA6836-TIQY ATA6836C-TIQY ATA6836-PXQW ATA6836C-PXQW

Package Information

SO28

Package SO28 QFN24

Remarks Taped and reeled, Pb-free Taped and reeled, Pb-free Taped and reeled, Pb-free Taped and reeled, Pb-free

Package SO28

Dimensions in mm
technical drawings according to DIN specifications
18 Atmel ATA6836

Atmel ATA6836

QFN24

Package QFN 24 - 5 x 5 Exposed pad x acc. JEDEC OUTLINE No. MO-220 Dimensions in mm Not indicated tolerances

Drawing-No. Issue 1;
19 18
13 12
nom.
technical drawings according to DIN specifications

History
4952J-AUTO-03/11
• Section “Application Notes” on page 17 changed
4952I-AUTO-08/10
• Table 2-1 “Pin Description SO28” on page 4 changed
• Ordering Information page 19 changed
4952H-AUTO-02/10
• Section 7 “Electrical Characteristics” numbers and on page 13 changed
4952G-AUTO-12/09
• Section 7 “Electrical Characteristics” number on page 11 changed
4952F-AUTO-07/09
• Put datasheet in a new template
• Section 4 “Absolute Maximum Ratings” on pag 10 changed
• Section 7 “Electrical Charcteristics” number on page 11 added
• Features on page 1 changed
• Table 2-1 “Pin Description SO28” on page 4 changed
• Table 2-2 “Pin Description QFN24” on pages 5 to 6 changed
4952E-AUTO-10/08
• Section 4 “Absolute Maximum Ratings” on page 10 changed
• Section 6 “Operating Range” on page 10 changed
• Section 7 “Electrical Characteristics” on pages 11 to 13 changed
• Section 8 “Serial Interface Timing” on page 14 changed
• Section 9 “Noise and Surge Immunity” on page 16 changed
4952D-AUTO-10/07
• Section 11 “Ordering Information” on page 18 changed
4952C-AUTO-09/07
• Section 7 “Electrical Characteristics” numbers and on page 12 changed
• Section 9 “Noise and Surge Immunity” on page 16 changed
4952B-AUTO-07/07
• Put datasheet in a new template
• Section 7 “Electrical Characteristics” numbers and on pages 11 to 13 changed
20 Atmel ATA6836

Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131 USA Tel +1 408 441-0311 Fax +1 408 487-2600

Atmel Asia Limited Unit 01-5 & 16, 19/F BEA Tower, Millennium City 5 418 Kwun Tong Road Kwun Tong, Kowloon HONG KONG Tel +852 2245-6100 Fax +852 2722-1369

Atmel Munich GmbH Business Campus Parkring 4 D-85748 Garching b. Munich GERMANY Tel +49 89-31970-0 Fax +49 89-3194621

Atmel Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 JAPAN Tel +81 3 3523-3551 Fax +81 3 3523-7581

Atmel logo and combinations thereof, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

Disclaimer The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ATA6836C-PXQW 19 Datasheet file may be downloaded here without warranties.

Datasheet ID: ATA6836C-PXQW 19 519224