The ATA6824 is designed for DC motor control application in automotive high temperature environment like in mechatronic assemblies in the vicinity of the hot engine, e.g. turbo charger. With a maximum junction temperature of 200°C, ATA6824 is suitable for applications with an ambient temperature up to 150°C.
Part | Datasheet |
---|---|
![]() |
ATA6824-MFHW (pdf) |
Related Parts | Information |
---|---|
![]() |
ATA6824C-PNQW |
![]() |
ATA6824-PNQW |
PDF Datasheet Preview |
---|
• PWM and Direction-controlled Driving of Four Externally-powered NMOS Transistors • High Temperature Capability up to 200°C Junction • A Programmable Dead Time Is Included to Avoid Peak Currents Within the H-bridge • Integrated Charge Pump to Provide Gate Voltages for High-side Drivers and to Supply The ATA6824 is designed for DC motor control application in automotive high temperature environment like in mechatronic assemblies in the vicinity of the hot engine, e.g. turbo charger. With a maximum junction temperature of 200°C, ATA6824 is suitable for applications with an ambient temperature up to 150°C. The IC includes 4 driver stages to control 4 external power MOSFETs. An external microcontroller provides the direction signal and the PWM frequency. In PWM operation, the high-side switches are permanently on while the low-side switches are activated by the PWM frequency. ATA6824 contains a voltage regulator to supply the microcontroller via the input pin VMODE the output voltage can be set to 5V or 3.3V respectively. The on-chip window watchdog timer provides a pin-programmable time window. The watchdog is internally trimmed to an accuracy of For communication a high voltage serial interface with a maximum data range of 20 kBaud is integrated. High Temperature H-bridge Motor Driver ATA6824 Figure Block Diagram CVRES CP VRES RGATE H2 RGATE RGATE S1 S2 L1 RGATE PGND CPLO CCP CPIH Charge Pump HS Driver 2 HS Driver 1 LS Driver 1 CVG VG PBAT VINT CVINT VBAT VBATSW 12V Regulator Vint 5V Regulator VCC 5V Regulator OTP 12 bit Oscillator VBG Bandgap Logic Control LS Driver 2 VBAT OT UV Supervisor OV DG2 DG1 CC timer WD timer RRWD TP1 Serial Interface SIO CSIO VMODE WD TP2 Ordering Information Extended Type Number ATA6824-PNQW ATA6824-MFHW Package QFN32, 5 mm x 5 mm TPQFP32, 7 mm x 7 mm Package Information Package QFN_ 5 x 5_32L Exposed pad x Dimensions in mm Not indicated tolerances Pin1 identification Top 32 ATA6824 Remarks Pb-free Pb-free Bottom 17 16 nom. Drawing-No. Issue 1; Z 10:1 technical drawings according to DIN specifications technical drawings according to DIN specifications Dimensions in mm 1 32 TITLE Package Drawing Contact Package epad TPQFP32 acc. JEDEC OUTLINE COMMON DIMENSIONS Unit of Measure = mm Symbol MIN NOM MAX NOTE 9 BSC 7 BSC 9 BSC 7 BSC 24 ATA6824 ATA6824 History 4931J-AUTO-02/10 • Section “Temperature Supervisor” on page 6 changed • Section “High Voltage Serial Interface” on page 9 changed • Section “Pin PWM” on page 10 changed • Section “Thermal Shutdown” on page 11 changed • Section “Short Circuit Detection” on page 12 changed • Section 6 “Absolute Maximum Ratings” on page 13 changed • Section 8 “Operating Range” on page 14 changed • Section 10 “Electrical Characteristics” number on page 21 changed 4931I-AUTO-12/09 • Section “Temperature Supervisor” on page 6 changed • Section “Timing Sequence” on page 8 changed • Section “High Voltage Serial Interface” on page 9 changed • Section “Pin PWM” on page 10 changed • Section “Short Circuit Detection” on page 12 changed • Section 10 “Electrical Characteristics” numbers and on page 16 changed • Section 10 “Electrical Characteristics” number 5.9a on page 17 added • Section 10 “Electrical Characteristics” numbers and on page 19 changed • Section 10 “Electrical Characteristics” number on page 19 added 4931H-AUTO-11/09 • Section “Short Circuit Detection” on page 12 changed • Section 10 “Electrical Characteristics” numbers and on page 15 added 4931G-AUTO-04/09 • Figure 5-5 “Definition of Bus Timing Parameters” on page 9 changed • Section “Charge Pump” on page 11 changed • Section 6 “Absolute Maximum Ratings” on page 13 changed • Section 8 “Operating Range” on page 14 changed • Section 10 “Electrical Characteristics” on pages 15 to 21 changed • Section 11 “Errata” on page 21 added • Section 12 “Ordering Information” on page 22 changed • Section 13 “Package Information” on page 22 changed 4931E-AUTO-01/08 • Section “5V/3.3V VCC Regulator” on pages 6 to 7 changed • Section “High Voltage Serial Interface” on page 9 changed • Section 10 “Electrical Characteristics” numbers 4.1a and on page 16 changed Headquarters Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131 USA Tel 1 408 441-0311 Fax 1 408 487-2600 International Atmel Asia Unit 1-5 & 16, 19/F BEA Tower, Millennium City 5 418 Kwun Tong Road Kwun Tong, Kowloon Hong Kong Tel 852 2245-6100 Fax 852 2722-1369 Atmel Europe Le Krebs 8, Rue Jean-Pierre Timbaud BP 309 78054 Saint-Quentin-en-Yvelines Cedex France Tel 33 1-30-60-70-00 Fax 33 1-30-60-71-11 Atmel Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel 81 3-3523-3551 Fax 81 3-3523-7581 Product Contact Web Site Literature Requests Technical Support Sales Contact Disclaimer The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. 2008 Atmel Corporation. All rights reserved. logo and combinations thereof, and others are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others. |
More datasheets: 10825R | 30-3007-6 | 30-3007-10 | 30-3007-3 | 30-3007-15 | AW-127A-20-Z | 94825 | 94808 | 83589031 | ATA6824C-PNQW |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ATA6824-MFHW Datasheet file may be downloaded here without warranties.