AT45D161-RC

AT45D161-RC Datasheet


The AT45D161 is a 5-volt only, serial interface Flash memory suitable for in-system reprogramming. Its 17,301,504 bits of memory are organized as 4096 pages of 528 bytes each. In addition to the main memory, the AT45D161 also contains two SRAM

Part Datasheet
AT45D161-RC AT45D161-RC AT45D161-RC (pdf)
Related Parts Information
AT45D161-TC AT45D161-TC AT45D161-TC
AT45D161-TI AT45D161-TI AT45D161-TI
AT45D161-JI AT45D161-JI AT45D161-JI
AT45D161-JC AT45D161-JC AT45D161-JC
AT45D161-RI AT45D161-RI AT45D161-RI
PDF Datasheet Preview
• Single 4.5V - 5.5V Supply
• Serial Interface Architecture
• Page Program Operation

Single Cycle Reprogram Erase and Program 4096 Pages 528 Bytes/Page Main Memory
• Optional Page and Block Erase Operations
• Two 528-byte SRAM Data Buffers Allows Receiving of Data while Reprogramming of Nonvolatile Memory
• Internal Program and Control Timer
• Fast Page Program Time 7 ms Typical
• 120 µs Typical Page to Buffer Transfer Time
• Low Power Dissipation 15 mA Active Read Current Typical 10 µA CMOS Standby Current Typical
• 15 MHz Max Clock Frequency
• Hardware Data Protection Feature
• Serial Peripheral Interface SPI Compatible Modes 0 and 3
• CMOS and TTL Compatible Inputs and Outputs
• Commercial and Industrial Temperature Ranges

The AT45D161 is a 5-volt only, serial interface Flash memory suitable for in-system reprogramming. Its 17,301,504 bits of memory are organized as 4096 pages of 528 bytes each. In addition to the main memory, the AT45D161 also contains two SRAM
continued

Pin Configurations

Pin Name Function

SOIC

CS SCK SI SO

RESET RDY/BUSY

Chip Select Serial Clock Serial Input Serial Output Hardware Page Write Protect Pin Chip Reset Ready/Busy

RESET

RDY/BUSY
16-megabit 5-volt Only Serial

AT45D161

Recommend using AT45DB161B for new designs.

PLCC
4 CS 3 NC 2 NC 1 GND 32 VCC 31 NC 30 NC

SCK 5 SI 6

SO 7 NC 8 NC 9 NC 10 NC 11 NC 12 NC 13
29 WP 28 RESET 27 RDY/BUSY 26 NC 25 NC 24 NC 23 NC 22 NC 21 NC

NC 14 NC 15 DC 16 DC 17 NC 18 NC 19 NC 20

Note PLCC package pins 16 and 17 are DON’T CONNECT

RDY/BUSY 1 RESET 2 WP 3 NC 4 NC 5 VCC 6 GND 7 NC 8 NC 9 NC 10 CS 11 SCK 12 SI 13 SO 14

TSOP Top View Type 1
28 NC 27 NC 26 NC 25 NC 24 NC 23 NC 22 NC 21 NC 20 NC 19 NC 18 NC 17 NC 16 NC 15 NC
data buffers of 528 bytes each. The buffers allow receiving of data while a page in the main memory is being reprogrammed. Unlike conventional Flash memories that are accessed randomly with multiple address lines and a parallel interface, the DataFlash uses a serial interface to sequentially access its data. The simple serial interface facilitates hardware layout, increases system reliability, minimizes switching noise, and reduces package size and active pin count. The device is optimized for use in many commercial and industrial applications where high density, low pin count, low voltage, and low power are essential. Typical applications for the DataFlash are digital voice storage, image storage, and data storage. The device operates
at clock frequencies up to 15 MHz with a typical active read current consumption of 15 mA.

To allow for simple in-system reprogrammability, the AT45D161 does not require high input voltages for programming. The device operates from a single power supply, 4.5V to 5.5V, for both the program and read operations. The AT45D161 is enabled through the chip select pin CS and accessed via a three-wire interface consisting of the Serial Input SI , Serial Output SO , and the Serial Clock SCK .

All programming cycles are self-timed, and no separate erase cycle is required before programming.

Block Diagram

FLASH MEMORY ARRAY

PAGE 528 BYTES

SCK CS

RESET VCC GND

RDY/BUSY

BUFFER 1 528 BYTES

BUFFER 2 528 BYTES

I/O INTERFACE

Memory Array

To provide optimal flexibility, the memory array of the AT45D161 is divided into three levels of granularity comprising of sectors, blocks, and pages. The Memory Architecture Diagram illustrates the breakdown of each
level and details the number of pages per sector and block. All program operations to the DataFlash occur on a page by page basis however, the optional erase operations can be performed at the block or page level.
Ordering Information
fSCK MHz

ICC mA Active Standby
Ordering Code

AT45D161-JC AT45D161-RC AT45D161-TC

AT45D161-JI AT45D161-RI AT45D161-TI

AT45D161

Package
32J 28R 28T
32J 28R 28T

Operation Range Commercial 0°C to 70°C

Industrial -40°C to 85°C

Package Type
32-lead, Plastic J-leaded Chip Carrier PLCC
28-lead, Wide, Plastic Gull Wing Small Outline SOIC
28-lead, Plastic Thin Small Outline Package TSOP

Packaging Information
32J, 32-lead, Plastic J-leaded Chip Carrier PLCC Dimensions in Inches and Millimeters

JEDEC STANDARD MS-016 AE
28R, 28-lead, Wide, Plastic Gull Wing Small Outline SOIC Dimensions in Inches and Millimeters

X PIN NO. 1 IDENTIFY

AT CONTACT POINTS

X MAX 3X
28T, 28-lead, Plastic Thin Small Outline Package TSOP Dimensions in Millimeters and Inches *

INDEX MARK AREA
0 5 REF
*Controlling dimension millimeters

AT45D161

Atmel Headquarters

Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 TEL 408 441-0311 FAX 408 487-2600

Europe Atmel SarL Route des Arsenaux 41 Casa Postale 80 CH-1705 Fribourg Switzerland TEL 41 26-426-5555 FAX 41 26-426-5500

Asia Atmel Asia, Ltd. Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimhatsui East Kowloon Hong Kong TEL 852 2721-9778 FAX 852 2722-1369

Japan Atmel Japan K.K. 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL 81 3-3523-3551 FAX 81 3-3523-7581

Atmel Operations

Atmel Colorado Springs 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 719 576-3300 FAX 719 540-1759

Atmel Rousset Zone Industrielle 13106 Rousset Cedex France TEL 33 4-4253-6000 FAX 33 4-4253-6001

Atmel Smart Card ICs Scottish Enterprise Technology Park East Kilbride, Scotland G75 0QR TEL 44 1355-357-000 FAX 44 1355-242-743

Atmel Grenoble Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex France TEL 33 4-7658-3000 FAX 33 4-7658-3480

Fax-on-Demand North America 1- 800 292-8635 International 1- 408 441-0732
e-mail

Web Site

BBS 1- 408 436-4309

Atmel Corporation Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems.

Marks bearing and/or are registered trademarks and trademarks of Atmel Corporation. Terms and product names in this document may be trademarks of others.
More datasheets: PI6C490097LEX | PI6C490097LEX-2017 | PI6C490097LE | PI6C490097LE-2017 | PI6LC48H02ALIE | LT6-100BLK | LT6-100RED | 1152 | AT45D161-TC | AT45D161-TI


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT45D161-RC Datasheet file may be downloaded here without warranties.

Datasheet ID: AT45D161-RC 519037