AT40K10AL-1AQC

AT40K10AL-1AQC Datasheet


AT40K05AL AT40K10AL AT40K20AL AT40K40AL

Part Datasheet
AT40K10AL-1AQC AT40K10AL-1AQC AT40K10AL-1AQC (pdf)
Related Parts Information
AT40K05AL-1BQU AT40K05AL-1BQU AT40K05AL-1BQU
AT40K20AL-1DQI AT40K20AL-1DQI AT40K20AL-1DQI
AT40K05AL-1BQC AT40K05AL-1BQC AT40K05AL-1BQC
AT40K05AL-1AJC AT40K05AL-1AJC AT40K05AL-1AJC
AT40K40AL-1BQU AT40K40AL-1BQU AT40K40AL-1BQU
AT40K10AL-1CQC AT40K10AL-1CQC AT40K10AL-1CQC
AT40K10AL-1AJC AT40K10AL-1AJC AT40K10AL-1AJC
AT40K20AL-1AJC AT40K20AL-1AJC AT40K20AL-1AJC
AT40K20AL-1BQC AT40K20AL-1BQC AT40K20AL-1BQC
AT40K20AL-1CQC AT40K20AL-1CQC AT40K20AL-1CQC
AT40K20AL-1EQC AT40K20AL-1EQC AT40K20AL-1EQC
AT40K20AL-1AQC AT40K20AL-1AQC AT40K20AL-1AQC
AT40K20AL-1BGC AT40K20AL-1BGC AT40K20AL-1BGC
AT40K10AL-1BQC AT40K10AL-1BQC AT40K10AL-1BQC
AT40K10AL-1DQC AT40K10AL-1DQC AT40K10AL-1DQC
AT40K10AL-1EQC AT40K10AL-1EQC AT40K10AL-1EQC
AT40K40AL-1BGC AT40K40AL-1BGC AT40K40AL-1BGC
AT40K20AL-1FQC AT40K20AL-1FQC AT40K20AL-1FQC
AT40K40AL-1BQC AT40K40AL-1BQC AT40K40AL-1BQC
AT40K40AL-1DQC AT40K40AL-1DQC AT40K40AL-1DQC
AT40K40AL-1EQC AT40K40AL-1EQC AT40K40AL-1EQC
AT40K40AL-1FQC AT40K40AL-1FQC AT40K40AL-1FQC
AT40K20AL-1BQU AT40K20AL-1BQU AT40K20AL-1BQU
AT40K05AL-1DQI AT40K05AL-1DQI AT40K05AL-1DQI
AT40K10AL-1BQU AT40K10AL-1BQU AT40K10AL-1BQU
AT40K05AL-1DQC AT40K05AL-1DQC AT40K05AL-1DQC
AT40K40AL-1DQU AT40K40AL-1DQU AT40K40AL-1DQU
AT40K05AL-1AQC AT40K05AL-1AQC AT40K05AL-1AQC
AT40K40AL-1BQI AT40K40AL-1BQI AT40K40AL-1BQI
PDF Datasheet Preview
• Ultra High Performance System Speeds to 100 MHz Array Multipliers > 50 MHz 10 ns Flexible SRAM Internal Tri-state Capability in Each Cell
• FreeRAM Flexible, Single/Dual Port, Synchronous/Asynchronous 10 ns SRAM 2,048 - 18,432 Bits of Distributed SRAM Independent of Logic Cells
• 128 - 384 PCI Compliant I/Os Programmable Output Drive Fast, Flexible Array Access Facilitates Pin Locking Pin-compatible with XC4000, XC5200 FPGAs
• 8 Global Clocks Fast, Low Skew Clock Distribution Programmable Rising/Falling Edge Transitions Distributed Clock Shutdown Capability for Low Power Management Global Reset/Asynchronous Reset Options 4 Additional Dedicated PCI Clocks
• Cache Dynamic Full/Partial Re-configurability In-System Unlimited Re-programmability via Serial or Parallel Modes Enables Adaptive Designs Enables Fast Vector Multiplier Updates QuickChange Tools for Fast, Easy Design Changes
• Pin-compatible Package Options Plastic Leaded Chip Carriers PLCC Thin, Plastic Quad Flat Packs LQFP, TQFP, PQFP
• Industry-standard Design Tools Seamless Integration Libraries, Interface, Full Back-annotation with Everest, Exemplar , Timing Driven Placement & Routing Automatic/Interactive Multi-chip Partitioning Fast, Efficient Synthesis Over 75 Automatic Component Generators Create 1000s of Reusable, Fully Deterministic Logic and RAM Functions
• Easy Migration to Atmel Gate Arrays for High Volume Production
• Supply Voltage 3.3V
• 5V I/O Tolerant
5K - 50K Gates Coprocessor FPGA with FreeRAM

AT40K05AL AT40K10AL AT40K20AL AT40K40AL

Table AT40KAL Family 1

Device

AT40K05AL

AT40K10AL

Usable Gates
5K - 10K
10K - 20K

Rows x Columns
16 x 16
24 x 24

Cells Registers
256 496 1
576 954 1

RAM Bits
2,048
4,608

I/O Maximum

Note Packages with FCK will have 8 less registers.

AT40K20AL 20K - 30K 32 x 32 1,024 1,520 1 8,192 256

AT40K40AL 40K - 50K 48 x 48 2,304 3,048 1 18,432 384

The AT40KAL is a family of fully PCI-compliant, SRAM-based FPGAs with distributed 10 ns programmable synchronous/asynchronous, dual-port/single-port SRAM, 8 global clocks, Cache Logic ability partially or fully reconfigurable without loss of data , automatic component generators, and range in size from 5,000 to 50,000 usable gates. I/O counts range from 128 to 384 in industry standard packages ranging from 84-pin PLCC to 352-ball Square BGA, and support 3.3V designs.

The AT40KAL is designed to quickly implement high-performance, large gate count designs through the use of synthesis and schematic-based tools used on a PC or Sun platform. Atmel’s design tools provide seamless integration with industry standard tools such as Synplicity, ModelSim, Exemplar and Viewlogic. See the “IDS Datasheet” available on the Atmel web site for a list of other supported tools.

The AT40KAL can be used as a coprocessor for high-speed DSP/processor-based designs by implementing a variety of computation intensive, arithmetic functions. These include adaptive finite impulse response FIR filters, fast Fourier transforms FFT , convolvers, interpolators and discrete-cosine transforms DCT that are required for video compression and decompression, encryption, convolution and other multimedia applications.

Fast, Flexible and Efficient SRAM

The AT40KAL FPGA offers a patented distributed 10 ns SRAM capability where the RAM can be used without losing logic resources. Multiple independent, synchronous or asynchronous, dual-port or single-port RAM functions FIFO, scratch pad, etc. can be created using Atmel’s macro generator tool.

Fast, Efficient Array and Vector Multipliers

The AT40KAL’s patented 8-sided core cell with direct horizontal, vertical and diagonal cell-to-cell connections implements ultra fast array multipliers without using any busing resources. The AT40KAL’s Cache Logic capability enables a large number of design coefficients and variables to be implemented in a very small amount of silicon, enabling vast improvement in system speed at much lower cost than conventional FPGAs.
2 AT40KAL Series FPGA

AT40KAL Series FPGA

Cache Logic Design

Automatic Component Generators
AT40K05AL Ordering Information

Usable Gates 5,000 - 10,000

Operating Voltage Speed Grade ns
3.3V
5,000 - 10,000
3.3V
AT40K10AL Ordering Information

Usable Gates Operating Voltage Speed Grade ns
10,000 - 20,000
3.3V
10,000 - 20,000
3.3V
AT40K20AL Ordering Information

Usable Gates Operating Voltage Speed Grade ns
20,000 - 30,000
3.3V
20,000 - 30,000
3.3V
Ordering Code AT40K05AL-1AJC AT40K05AL-1AQC AT40K05AL-1BQC AT40K05AL-1DQC AT40K05AL-1AJI AT40K05AL-1AQI AT40K05AL-1BQI AT40K05AL-1DQI
Ordering Code AT40K10AL-1AJC AT40K10AL-1AQC AT40K10AL-1BQC AT40K10AL-1DQC AT40K10AL-1AJI AT40K10AL-1AQI AT40K10AL-1BQI AT40K10AL-1DQI
Ordering Code AT40K20AL-1AJC AT40K20AL-1AQC AT40K20AL-1BQC AT40K20AL-1DQC

AT40K20AL-1AJI AT40K20AL-1AQI AT40K20AL-1BQI AT40K20AL-1DQI
AT40K40AL Ordering Information

Usable Gates Operating Voltage Speed Grade ns
40,000 - 50,000
3.3V
40,000 - 50,000
3.3V

Note For military parts, contact Atmel at
Ordering Code

AT40K40AL-1BQC AT40K40AL-1DQC AT40K40AL-1EQC

AT40K40AL-1BQI AT40K40AL-1DQI AT40K40AL-1EQI

Package
84J 100T1 144L1 208Q1
84J 100T1 144L1 208Q1

Operation Range 1 Commercial 0°C to 70°C

Industrial -40°C to 85°C

Package
84J 100T1 144L1 208Q1
84J 100T1 144L1 208Q1

Operation Range 1 Commercial 0°C to 70°C

Industrial -40°C to 85°C

Package
84J 100T1 144L1 208Q1
84J 100T1 144L1 208Q1

Operation Range 1 Commercial 0°C to 70°C

Industrial -40°C to 85°C

Package
144L1 208Q1 240Q1
144L1 208Q1 240Q1

Operation Range 1 Commercial 0°C to 70°C

Industrial -40°C to 85°C
48 AT40KAL Series FPGA

Packaging Information
84J PLCC

AT40KAL Series FPGA

PIN NO. 1 IDENTIFIER
e D1 D

D2/E2

A2 A1 A
0.51 0.020 MAX 3X

This package conforms to JEDEC reference MS-018, Variation AF. Dimensions D1 and E1 do not include mold protrusion.

Allowable protrusion is mm per side. Dimension D1 and E1 include mold mismatch and are measured at the extreme material condition at the upper or lower parting line. Lead coplanarity is mm maximum.

COMMON DIMENSIONS Unit of Measure = mm

SYMBOL MIN NOM MAX NOTE

Note 2

Note 2

D2/E2

TITLE 2325 Orchard Parkway 84J, 84-lead, Plastic J-leaded Chip Carrier PLCC R San Jose, CA 95131
10/04/01
More datasheets: ZRC400A03STZ | ZRC400A02STOB | ZRC400A01 | AT40K05AL-1BQU | AT40K20AL-1DQI | AT40K05AL-1BQC | AT40K05AL-1AJC | AT40K40AL-1BQU | AT40K10AL-1CQC | AT40K10AL-1AJC


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT40K10AL-1AQC Datasheet file may be downloaded here without warranties.

Datasheet ID: AT40K10AL-1AQC 519016