The AT34C02 provides 2048 bits of serial electrically-erasable and programmable read only memory EEPROM organized as 256 words of 8 bits each. The first-half of the device incorporates a software write protection feature while hardware write protection for the entire array is available via an external pin as well. Once the software write protection is enabled, by sending a special command to the device, it cannot be reversed. The hardware write protection is controlled with the WP pin and can be used to protect the entire array, whether or not the software write protection has been enabled. This allows the user to protect none, first-half, or all of the array depending on the application. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operations are essential. The AT34C02 is available in space saving 8-pin PDIP, 8-lead JEDEC SOIC, and 8-lead TSSOP packages and is accessed via a 2-wire serial interface. In addition, it is available in 5.0V 4.5V to 5.5V , 2.7V 2.7V to 5.5V , and 1.8V 1.8V to 5.5V versions.
Part | Datasheet |
---|---|
![]() |
AT34C02-10PC (pdf) |
Related Parts | Information |
---|---|
![]() |
AT34C02-10PI |
![]() |
AT34C02N-10SC-2.7 |
![]() |
AT34C02-10PC-1.8 |
![]() |
AT34C02N-10SI |
![]() |
AT34C02N-10SC-1.8 |
![]() |
AT34C02N-10SC |
![]() |
AT34C02-10TI |
![]() |
AT34C02-10TC-2.7 |
![]() |
AT34C02-10TC-1.8 |
![]() |
AT34C02-10PC-2.7 |
![]() |
AT34C02-10TC |
PDF Datasheet Preview |
---|
• Permanent Software Write Protection for the First-half of the Array Software Procedure to Verify Write Protect Status • Hardware Write Protection for the Entire Array • Low-voltage and Standard-voltage Operation VCC = 4.5V to 5.5V VCC = 2.7V to 5.5V VCC = 1.8V to 5.5V • Internally Organized 256 x 8 • 2-wire Serial Interface • Schmitt Trigger, Filtered Inputs for Noise Suppression • Bidirectional Data Transfer Protocol • 100 kHz 1.8V and 400 kHz 2.7V and 5.0V Compatibility • 16-byte Page Write Modes • Partial Page Writes Are Allowed • Self-timed Write Cycle 10 ms max • High-reliability Endurance 1 Million Write Cycles Data Retention 100 Years ESD Protection >3,000V • Automotive Grade and Extended Temperature Devices Available • 8-pin PDIP, 8-lead JEDEC SOIC and 8-lead TSSOP Packages Pin Configurations Pin Name A0 - A2 SDA SCL WP Function Address Inputs Serial Data Serial Clock Input Write Protect 8-lead SOIC A0 1 A1 2 A2 3 GND 4 8 VCC 7 WP 6 SCL 5 SDA A0 A1 A2 GND 8-lead TSSOP VCC WP SCL SDA 8-pin PDIP A0 1 A1 2 A2 3 GND 4 8 VCC 7 WP 6 SCL 5 SDA 2-wire Serial EEPROM with Permanent Software Write Protect 2K 256 x 8 AT34C02 2-Wire Serial EEPROM with Permanent Software Write Protec Absolute Maximum Ratings* Operating -55°C to +125°C Storage Temperature -65 °C to +150°C Voltage on Any Pin with Respect to Ground to +7.0V Maximum Operating Voltage 6.25V DC Output mA *NOTICE: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Block Diagram VCC GND WP SCL SDA A2 A1 A0 START STOP LOGIC LOAD DEVICE ADDRESS COMPARATOR SERIAL CONTROL LOGIC EN WRITE PROTECT CIRCUITRY COMP LOAD INC DATA WORD ADDR/COUNTER X DEC H.V. PUMP/TIMING DATA RECOVERY SOFTWARE WRITE PROTECTED AREA Ordering Information tWR max ms ICC max µA 3000 ISB max µA fMAX kHz 3000 1500 1500 AT34C02 Ordering Code AT34C02-10PC AT34C02N-10SC AT34C02-10TC AT34C02-10PI AT34C02N-10SI AT34C02-10TI AT34C02-10PC-2.7 AT34C02N-10SC-2.7 AT34C02-10TC-2.7 AT34C02-10PI-2.7 AT34C02N-10SI-2.7 AT34C02-10TI-2.7 AT34C02-10PC-1.8 AT34C02N-10SC-1.8 AT34C02-10TC-1.8 AT34C02-10PI-1.8 AT34C02N-10SI-1.8 AT34C02-10TI-1.8 Package 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T Operation Range Commercial 0°C to 70°C Industrial -40°C to 85°C Commercial 0°C to 70°C Industrial -40°C to 85°C Commercial 0°C to 70°C Industrial -40°C to 85°C 8P3 8S1 8T Blank Package Type 8-pin, Wide, Plastic Dual Inline Package PDIP 8-lead, Wide, Plastic Gull Wing Small Outline Package JEDEC SOIC 8-lead, Wide, Thin Shrink Small Outline Package TSSOP Options Standard Operation 4.5V to 5.5V Low Voltage 2.7V to 5.5V Low Voltage 1.8V to 5.5V Packaging Information 8P3, 8-pin, Wide, Plastic Dual Inline Package PDIP Dimensions in Inches and Millimeters PIN 1 SEATING PLANE 8T, 8-lead, Wide, Thin Shrink Small Outline Package TSSOP Dimensions in Millimeters and Inches * PIN 1 0 REF 8 *Controlling dimension millimeters AT34C02 8S1, 8-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC Dimensions in Inches and Millimeters PIN 1 Atmel Headquarters Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 TEL 408 441-0311 FAX 408 487-2600 Europe Atmel U.K., Ltd. Coliseum Business Centre Riverside Way Camberley, Surrey GU15 3YL England TEL 44 1276-686-677 FAX 44 1276-686-697 Asia Atmel Asia, Ltd. Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimhatsui East Kowloon Hong Kong TEL 852 2721-9778 FAX 852 2722-1369 Japan Atmel Japan K.K. 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL 81 3-3523-3551 FAX 81 3-3523-7581 Atmel Operations Atmel Colorado Springs 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 719 576-3300 FAX 719 540-1759 Atmel Rousset Zone Industrielle 13106 Rousset Cedex France TEL 33 4-4253-6000 FAX 33 4-4253-6001 Fax-on-Demand North America 1- 800 292-8635 International 1- 408 441-0732 Web Site BBS 1- 408 436-4309 Atmel Corporation Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems. Marks bearing and/or are registered trademarks and trademarks of Atmel Corporation. Terms and product names in this document may be trademarks of others. Printed on recycled paper. |
More datasheets: AT34C02-10PI | AT34C02N-10SC-2.7 | AT34C02-10PC-1.8 | AT34C02N-10SI | AT34C02N-10SC-1.8 | AT34C02N-10SC | AT34C02-10TI | AT34C02-10TC-2.7 | AT34C02-10TC-1.8 | AT34C02-10PC-2.7 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT34C02-10PC Datasheet file may be downloaded here without warranties.