AT27BV1024-15JC

AT27BV1024-15JC Datasheet


• Pin Compatible with JEDEC Standard AT27C1024<br>• Low Power CMOS Operation

Part Datasheet
AT27BV1024-15JC AT27BV1024-15JC AT27BV1024-15JC (pdf)
Related Parts Information
AT27BV1024-90JC AT27BV1024-90JC AT27BV1024-90JC
AT27BV1024-90VC AT27BV1024-90VC AT27BV1024-90VC
AT27BV1024-15VI AT27BV1024-15VI AT27BV1024-15VI
AT27BV1024-15VC AT27BV1024-15VC AT27BV1024-15VC
AT27BV1024-15JI AT27BV1024-15JI AT27BV1024-15JI
AT27BV1024-12VI AT27BV1024-12VI AT27BV1024-12VI
AT27BV1024-12VC AT27BV1024-12VC AT27BV1024-12VC
AT27BV1024-12JI AT27BV1024-12JI AT27BV1024-12JI
AT27BV1024-90VI AT27BV1024-90VI AT27BV1024-90VI
AT27BV1024-12JU AT27BV1024-12JU AT27BV1024-12JU
AT27BV1024-12JC AT27BV1024-12JC AT27BV1024-12JC
PDF Datasheet Preview
• Fast Read Access Time - 90 ns
• Dual Voltage Range Operation

Unregulated Battery Power Supply Range, 2.7V to 3.6V or Standard 5V ± 10% Supply Range
• Pin Compatible with JEDEC Standard AT27C1024
• Low Power CMOS Operation
20 µA max. less than 1 µA typical Standby for VCC = 3.6V 36 mW max. Active at 5 MHz for VCC = 3.6V
• JEDEC Standard Surface Mount Packages 44-Lead PLCC
40-Lead VSOP 10 x 14mm
• High Reliability CMOS Technology
2,000V ESD Protection
200 mA Latchup Immunity
• Rapid Programming Algorithm - 100 µs/word typical
• CMOS and TTL Compatible Inputs and Outputs

JEDEC Standard for LVTTL and LVBO
• Integrated Product Identification Code
• Commercial and Industrial Temperature Ranges

The AT27BV1024 is a high performance, low power, low voltage 1,048,576-bit one-
time programmable read only memory OTP EPROM organized as 64K by 16 bits. It
requires only one supply in the range of 2.7V to 3.6V in normal read mode operation.

The by-16 organization makes this part ideal for portable and handheld 16- and 32-bit
microprocessor based systems using either regulated or unregulated battery power.

Pin Configurations
continued

Pin Name

Function

A0 - A15

Addresses

O0 - O15

Outputs

Chip Enable

Output Enable

Program Strobe

No Connect

Note Both GND pins must be connected.

PLCC Top View
6 O13 5 O14 4 O15 3 CE 2 VPP 1 NC 44 VCC 43 PGM 42 NC 41 A15 40 A14

O12 7 O11 8 O10 9

O9 10 O8 11 GND 12 NC 13 O7 14 O6 15 O5 16 O4 17
39 A13 38 A12 37 A11 36 A10 35 A9 34 GND 33 NC 32 A8 31 A7 30 A6 29 A5

O3 18 O2 19 O1 20 O0 21 OE 22 NC 23 A0 24 A1 25 A2 26 A3 27 A4 28

Note PLCC Package Pins 1 and 23 are DON’T CONNECT.

A9 1 A10 2 A11 3 A12 4 A13 5 A14 6 A15 7 NC 8 PGM 9 VCC 10 VPP 11 CE 12 O15 13 O14 14 O13 15 O12 16 O11 17 O10 18 O9 19 O8 20

VSOP Top View Type 1
40 GND 39 A8 38 A7 37 A6 36 A5 35 A4 34 A3 33 A2 32 A1 31 A0 30 OE 29 O0 28 O1 27 O2 26 O3 25 O4 24 O5 23 O6 22 O7 21 GND
1-Megabit 64K x 16 Unregulated Battery-Voltage High-Speed OTP EPROM AT27BV1024

Atmel’s innovative design techniques provide fast speeds that rival 5V parts while keeping the low power consumption of a 3V supply. At VCC = 2.7V, any word can be accessed in less than 120 ns. With a typical power dissipation of only 18 mW at 5 MHz and VCC = 3V, the AT27BV1024 consumes less than one fifth the power of a standard 5V EPROM.

Standby mode supply current is typically less than 1 µA at 3V. The AT27BV1024 simplifies system design and stretches battery lifetime even further by eliminating the need for power supply regulation.

The AT27BV1024 is available in industry standard JEDECapproved one-time programmable OTP plastic PLCC and VSOP packages. All devices feature two-line control CE, OE to give designers the flexibility to prevent bus contention.

The AT27BV1024 operating with VCC at 3.0V produces TTL level outputs that are compatible with standard TTL logic devices operating at VCC = 5.0V. At VCC = 2.7V, the part is compatible with JEDEC approved low voltage battery operation LVBO interface specifications. The device is also capable of standard 5-volt operation making it ideally suited for dual supply range systems or card products that are pluggable in both 3-volt and 5-volt hosts.
Ordering Information
tACC

ICC mA

Active Standby
Ordering Code AT27BV1024-90JC AT27BV1024-90VC AT27BV1024-90JI AT27BV1024-90VI AT27BV1024-12JC AT27BV1024-12VC AT27BV1024-12JI AT27BV1024-12VI AT27BV1024-15JC AT27BV1024-15VC AT27BV1024-15JI AT27BV1024-15VI

Package 44J 40V 44J 40V 44J 40V 44J 40V 44J 40V 44J 40V

Operation Range

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C
44J 40V

Package Type 44-Lead, Plastic J-Leaded Chip Carrier PLCC 40-Lead, Plastic Thin Small Outline Package VSOP 10 x 14 mm

AT27BV1024

Packaging Information
44J, 44-Lead, Plastic J-Leaded Chip Carrier PLCC Dimensions in Inches and Millimeters

JEDEC STANDARD MS-018 AC

AT27BV1024
40V, 40-Lead, Plastic Thin Small Outline Package VSOP Dimensions in Millimeters and Inches

JEDEC OUTLINE MO-142 CA

X 45° PIN NO. 1 IDENTIFY

X 30° - 45°
.685 17.4 SQ

REF SQ

X 45° MAX 3X

Atmel Headquarters

Atmel Operations

Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 TEL 408 441-0311 FAX 408 487-2600

Atmel Colorado Springs 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 719 576-3300 FAX 719 540-1759

Europe Atmel U.K., Ltd. Coliseum Business Centre Riverside Way Camberley, Surrey GU15 3YL England TEL 44 1276-686677 FAX 44 1276-686697

Atmel Rousset Zone Industrielle 13106 Rousset Cedex, France TEL 33 4 42 53 60 00 FAX 33 4 42 53 60 01

Asia Atmel Asia, Ltd. Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon, Hong Kong TEL 852 27219778 FAX 852 27221369

Japan Atmel Japan K.K. Tonetsu Shinkawa Bldg., 9F 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL 81 3-3523-3551 FAX 81 3-3523-7581

Fax-on-Demand North America 1- 800 292-8635

International 1- 408 441-0732
e-mail

Web Site

BBS 1- 408 436-4309

Atmel Corporation Atmel Cor poration makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s website. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual proper ty of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems.

Marks bearing and/or are registered trademarks and trademarks of Atmel Corporation. Terms and product names in this document may be trademarks of others.

Printed on recycled paper.
More datasheets: ACA-108-T | AT27BV1024-90JC | AT27BV1024-90VC | AT27BV1024-15VI | AT27BV1024-15VC | AT27BV1024-15JI | AT27BV1024-12VI | AT27BV1024-12VC | AT27BV1024-12JI | AT27BV1024-90VI


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT27BV1024-15JC Datasheet file may be downloaded here without warranties.

Datasheet ID: AT27BV1024-15JC 518928