AT27BV010-15TC

AT27BV010-15TC Datasheet


• Compatible with JEDEC Standard AT27C010<br>• Low Power CMOS Operation

Part Datasheet
AT27BV010-15TC AT27BV010-15TC AT27BV010-15TC (pdf)
Related Parts Information
AT27BV010-15VI AT27BV010-15VI AT27BV010-15VI
AT27BV010-90TC AT27BV010-90TC AT27BV010-90TC
AT27BV010-90TI AT27BV010-90TI AT27BV010-90TI
AT27BV010-90VI AT27BV010-90VI AT27BV010-90VI
AT27BV010-15TI AT27BV010-15TI AT27BV010-15TI
AT27BV010-15VC AT27BV010-15VC AT27BV010-15VC
AT27BV010-90VC AT27BV010-90VC AT27BV010-90VC
AT27BV010-12JI AT27BV010-12JI AT27BV010-12JI
AT27BV010-15JI AT27BV010-15JI AT27BV010-15JI
AT27BV010-15JC AT27BV010-15JC AT27BV010-15JC
AT27BV010-12VI AT27BV010-12VI AT27BV010-12VI
AT27BV010-12VC AT27BV010-12VC AT27BV010-12VC
AT27BV010-12TI AT27BV010-12TI AT27BV010-12TI
AT27BV010-12TC AT27BV010-12TC AT27BV010-12TC
AT27BV010-90JI AT27BV010-90JI AT27BV010-90JI
AT27BV010-90TU AT27BV010-90TU AT27BV010-90TU
AT27BV010-90JC AT27BV010-90JC AT27BV010-90JC
AT27BV010-12JC AT27BV010-12JC AT27BV010-12JC
PDF Datasheet Preview
• Fast Read Access Time - 90 ns
• Dual Voltage Range Operation

Unregulated Battery Power Supply Range, 2.7V to 3.6V or Standard 5V ± 10% Supply Range
• Compatible with JEDEC Standard AT27C010
• Low Power CMOS Operation
20 µA max. less than 1 µA typical Standby for VCC = 3.6V 29 mW max. Active at 5 MHz for VCC = 3.6V
• JEDEC Standard Packages 32-Lead PLCC
32-Lead TSOP 8 x 20 mm
32-Lead VSOP 8 x 14 mm
• High Reliability CMOS Technology
2,000V ESD Protection
200 mA Latchup Immunity
• Rapid Programming Algorithm - 100 µs/byte typical
• CMOS and TTL Compatible Inputs and Outputs

JEDEC Standard for LVTTL and LVBO
• Integrated Product Identification Code
• Commercial and Industrial Temperature Ranges

The AT27BV010 is a high performance, low power, low voltage 1,048,576-bit one-
time programmable read only memory OTP EPROM organized as 128K by 8 bits. It
requires only one supply in the range of 2.7V to 3.6V in normal read mode operation,
making it ideal for fast, portable systems using either regulated or unregulated battery
power.
continued
1-Megabit 128K x 8 Unregulated Battery-Voltage OTP EPROM

AT27BV010

Pin Configurations

Pin Name A0 - A16 O0 - O7 CE OE PGM NC

Function Addresses Outputs Chip Enable Output Enable Program Strobe No Connect

PLCC Top View
4 A12 3 A15 2 A16 1 VPP 32 VCC 31 PGM 30 NC

A7 5 A6 6 A5 7 A4 8 A3 9 A2 10 A1 11 A0 12 O0 13
29 A14 28 A13 27 A8 26 A9 25 A11 24 OE 23 A10 22 CE 21 O7

TSOP/VSOP Top View Type 1

A11 1 A9 2 A8 3

A13 4 A14 5 NC 6 PGM 7 VCC 8 VPP 9 A16 10 A15 11 A12 12

A7 13 A6 14 A5 15 A4 16
32 OE 31 A10 30 CE 29 O7 28 O6 27 O5 26 O4 25 O3 24 GND 23 O2 22 O1 21 O0 20 A0 19 A1 18 A2 17 A3

O1 14 O2 15 GND 16 O3 17 O4 18 O5 19 O6 20

Atmel’s innovative design techniques provide fast speeds that rival 5V parts while keeping the low power consumption of a 3V supply. At VCC = 2.7V, any byte can be accessed in less than 90 ns. With a typical power draw of only 18 mW at 5 MHz and VCC = 3V, the AT27BV010 consumes less than one fifth the power of a standard 5V EPROM. Standby mode supply current is typically less than 1 µA at 3V. The AT27BV010 simplifies system design and stretches battery lifetime even further by eliminating the need for power supply regulation.

The AT27BV010 is available in industry standard JEDECapproved one-time programmable OTP plastic PLCC, TSOP, and VSOP packages. All devices feature two-line control CE, OE to give designers the flexibility to prevent bus contention.

The AT27BV010 operating with VCC at 3.0V produces TTL level outputs that are compatible with standard TTL logic devices operating at VCC = 5.0V. At VCC = 2.7V, the part is compatible with JEDEC approved low voltage battery operation LVBO interface specifications. The device is also capable of standard 5-volt operation making it ideally suited for dual supply range systems or card products that are pluggable in both 3-volt and 5-volt hosts.

Atmel’s AT27BV010 has additional features to ensure high quality and efficient production use. The Rapid Programming Algorithm reduces the time required to program the
part and guarantees reliable programming. Programming time is typically only 100 µs/byte. The Integrated Product Identification Code electronically identifies the device and manufacturer. This feature is used by industry standard programming equipment to select the proper programming algorithms and voltages. The AT27BV010 programs exactly the same way as a standard 5V AT27C010 and uses the same programming equipment.

System Considerations

Switching between active and standby conditions via the Chip Enable pin may produce transient voltage excursions. Unless accommodated by the system design, these transients may exceed data sheet limits, resulting in device non-conformance. At a minimum, a µF high frequency, low inherent inductance, ceramic capacitor should be utilized for each device. This capacitor should be connected between the VCC and Ground terminals of the device, as close to the device as possible. Additionally, to stabilize the supply voltage level on printed circuit boards with large EPROM arrays, a µF bulk electrolytic capacitor should be utilized, again connected between the VCC and Ground terminals. This capacitor should be positioned as close as possible to the point where the power supply is connected to the array.

Block Diagram

AT27BV010

AT27BV010

Absolute Maximum Ratings*
Ordering Information
tACC

ICC mA VCC = 3.6V

Active Standby
Ordering Code

AT27BV010-90JC AT27BV010-90TC AT27BV010-90VC

AT27BV010-90JI AT27BV010-90TI AT27BV010-90VI

AT27BV010-12JC AT27BV010-12TC AT27BV010-12VC

AT27BV010-12JI AT27BV010-12TI AT27BV010-12VI

AT27BV010-15JC AT27BV010-15TC AT27BV010-15VC

AT27BV010-15JI AT27BV010-15TI AT27BV010-15VI

Package
32J 32T 32V
32J 32T 32V
32J 32T 32V
32J 32T 32V
32J 32T 32V
32J 32T 32V

Operation Range Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C
32J 32T 32V

Package Type 32-Lead, Plastic J-Leaded Chip Carrier PLCC 32-Lead, Plastic Thin Small Outline Package TSOP 8 x 20 mm 32 Lead, Plastic Thin Small Outline Package VSOP 8 x 14 mm

AT27BV010

AT27BV010

Packaging Information
32J, 32-Lead, Plastic J-Leaded Chip Carrier PLCC Dimensions in Inches and Millimeters

JEDEC STANDARD MS-016 AE

X PIN NO. 1 IDENTIFY

AT CONTACT POINTS

X MAX 3X
32V, 32-Lead, Plastic Thin Small Outline Package VSOP Dimensions in Inches and Millimeters

JEDEC OUTLINE MO-142 BA
32T, 32-Lead, Plastic Thin Small Outline Package TSOP Dimensions in Millimeters and Inches *

JEDEC OUTLINE MO-142 BD

INDEX MARK
*Controllling dimension millimeters

INDEX MARK

Atmel Headquarters

Atmel Operations

Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 TEL 408 441-0311 FAX 408 487-2600

Atmel Colorado Springs 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 719 576-3300 FAX 719 540-1759
More datasheets: AT27BV010-15TI | AT27BV010-15VC | AT27BV010-90VC | AT27BV010-12JI | AT27BV010-15JI | AT27BV010-15JC | AT27BV010-12VI | AT27BV010-12VC | AT27BV010-12TI | AT27BV010-12TC


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT27BV010-15TC Datasheet file may be downloaded here without warranties.

Datasheet ID: AT27BV010-15TC 518924