AT24C01A-10SC-1.8

AT24C01A-10SC-1.8 Datasheet


The AT24C01A/02/04/08/16 provides 1024/2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory EEPROM organized as 128/256/512/1024/2048 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The AT24C01A/02/04/08/16 is available in space-saving 8-pin PDIP, AT24C01A/02/04/08/16 , 8-lead TSSOP AT24C01A/02/04/08/16 and 8-lead JEDEC SOIC AT24C01A/02/04/08/16 packages and is accessed via a 2-wire serial interface. In addition, the entire family is available in 5.0V 4.5V to 5.5V , 2.7V 2.7V to 5.5V , 2.5V 2.5V to 5.5V and 1.8V 1.8V to 5.5V versions.

Part Datasheet
AT24C01A-10SC-1.8 AT24C01A-10SC-1.8 AT24C01A-10SC-1.8 (pdf)
Related Parts Information
AT24C04N-10SI-1.8 AT24C04N-10SI-1.8 AT24C04N-10SI-1.8
AT24C04N-10SC-2.5 AT24C04N-10SC-2.5 AT24C04N-10SC-2.5
AT24C04N-10SC-1.8 AT24C04N-10SC-1.8 AT24C04N-10SC-1.8
AT24C16N-10SI-2.5 AT24C16N-10SI-2.5 AT24C16N-10SI-2.5
AT24C04-10PI-2.5 AT24C04-10PI-2.5 AT24C04-10PI-2.5
AT24C04-10PI-1.8 AT24C04-10PI-1.8 AT24C04-10PI-1.8
AT24C04N-10SI-2.5 AT24C04N-10SI-2.5 AT24C04N-10SI-2.5
AT24C04-10PC-1.8 AT24C04-10PC-1.8 AT24C04-10PC-1.8
AT24C16-10PC-2.5 AT24C16-10PC-2.5 AT24C16-10PC-2.5
AT24C04-10PC-2.5 AT24C04-10PC-2.5 AT24C04-10PC-2.5
AT24C08-10PC-1.8 AT24C08-10PC-1.8 AT24C08-10PC-1.8
AT24C08-10PC-2.5 AT24C08-10PC-2.5 AT24C08-10PC-2.5
AT24C08-10PI-2.5 AT24C08-10PI-2.5 AT24C08-10PI-2.5
AT24C08N-10SC-1.8 AT24C08N-10SC-1.8 AT24C08N-10SC-1.8
AT24C08N-10SC-2.5 AT24C08N-10SC-2.5 AT24C08N-10SC-2.5
AT24C02N-10SI-2.5 AT24C02N-10SI-2.5 AT24C02N-10SI-2.5
AT24C16-10PC-1.8 AT24C16-10PC-1.8 AT24C16-10PC-1.8
AT24C16-10PI-2.5 AT24C16-10PI-2.5 AT24C16-10PI-2.5
AT24C16N-10SC-1.8 AT24C16N-10SC-1.8 AT24C16N-10SC-1.8
AT24C16N-10SC-2.5 AT24C16N-10SC-2.5 AT24C16N-10SC-2.5
AT24C08N-10SI-2.5 AT24C08N-10SI-2.5 AT24C08N-10SI-2.5
AT24C01A-10SI-1.8 AT24C01A-10SI-1.8 AT24C01A-10SI-1.8
AT24C02-10PI-2.5 AT24C02-10PI-2.5 AT24C02-10PI-2.5
AT24C02N-10SI-1.8 AT24C02N-10SI-1.8 AT24C02N-10SI-1.8
AT24C02-10PC-2.5 AT24C02-10PC-2.5 AT24C02-10PC-2.5
AT24C01A-10SI-2.5 AT24C01A-10SI-2.5 AT24C01A-10SI-2.5
AT24C02-10PI-1.8 AT24C02-10PI-1.8 AT24C02-10PI-1.8
AT24C01A-10SC-2.5 AT24C01A-10SC-2.5 AT24C01A-10SC-2.5
AT24C01A-10PI-2.5 AT24C01A-10PI-2.5 AT24C01A-10PI-2.5
AT24C01A-10PI-1.8 AT24C01A-10PI-1.8 AT24C01A-10PI-1.8
AT24C01A-10PC-2.5 AT24C01A-10PC-2.5 AT24C01A-10PC-2.5
AT24C01A-10PC-1.8 AT24C01A-10PC-1.8 AT24C01A-10PC-1.8
AT24C02N-10SC-1.8 AT24C02N-10SC-1.8 AT24C02N-10SC-1.8
AT24C02N-10SC-2.5 AT24C02N-10SC-2.5 AT24C02N-10SC-2.5
AT24C02-10PC-1.8 AT24C02-10PC-1.8 AT24C02-10PC-1.8
AT24C02N-10SI-1.8-T AT24C02N-10SI-1.8-T AT24C02N-10SI-1.8-T
AT24C01A-10TI-2.7-T AT24C01A-10TI-2.7-T AT24C01A-10TI-2.7-T
AT24C04N-10SI-2.7-T AT24C04N-10SI-2.7-T AT24C04N-10SI-2.7-T
AT24C04N-10SI-1.8-T AT24C04N-10SI-1.8-T AT24C04N-10SI-1.8-T
AT24C02N-10SI-2.7-T AT24C02N-10SI-2.7-T AT24C02N-10SI-2.7-T
AT24C02-10TI-1.8-T AT24C02-10TI-1.8-T AT24C02-10TI-1.8-T
AT24C02-10TI-2.7-T AT24C02-10TI-2.7-T AT24C02-10TI-2.7-T
AT24C01A-10TI-1.8-T AT24C01A-10TI-1.8-T AT24C01A-10TI-1.8-T
AT24C01A-10SI-1.8-T AT24C01A-10SI-1.8-T AT24C01A-10SI-1.8-T
AT24C01A-10SI-2.7-T AT24C01A-10SI-2.7-T AT24C01A-10SI-2.7-T
AT24C01A-10TI-1.8 AT24C01A-10TI-1.8 AT24C01A-10TI-1.8
AT24C04-10TI-1.8 AT24C04-10TI-1.8 AT24C04-10TI-1.8
AT24C01A-10TI-2.7 AT24C01A-10TI-2.7 AT24C01A-10TI-2.7
AT24C02-10TI-1.8 AT24C02-10TI-1.8 AT24C02-10TI-1.8
AT24C08-10TC-1.8 AT24C08-10TC-1.8 AT24C08-10TC-1.8
AT24C04-10TI-2.7 AT24C04-10TI-2.7 AT24C04-10TI-2.7
AT24C02-10TI-2.7 AT24C02-10TI-2.7 AT24C02-10TI-2.7
AT24C01A-10SI-2.7 AT24C01A-10SI-2.7 AT24C01A-10SI-2.7
AT24C02N-10SC AT24C02N-10SC AT24C02N-10SC
AT24C02-10PI-2.7 AT24C02-10PI-2.7 AT24C02-10PI-2.7
AT24C02-10PI AT24C02-10PI AT24C02-10PI
AT24C02-10PC-2.7 AT24C02-10PC-2.7 AT24C02-10PC-2.7
AT24C02-10PC AT24C02-10PC AT24C02-10PC
AT24C01A-10SI AT24C01A-10SI AT24C01A-10SI
AT24C01A-10SC-2.7 AT24C01A-10SC-2.7 AT24C01A-10SC-2.7
AT24C01A-10SC AT24C01A-10SC AT24C01A-10SC
AT24C01A-10PI-2.7 AT24C01A-10PI-2.7 AT24C01A-10PI-2.7
AT24C02N-10SC-2.7 AT24C02N-10SC-2.7 AT24C02N-10SC-2.7
AT24C01A-10PC-2.7 AT24C01A-10PC-2.7 AT24C01A-10PC-2.7
AT24C04-10PI-2.7 AT24C04-10PI-2.7 AT24C04-10PI-2.7
AT24C01A-10PC AT24C01A-10PC AT24C01A-10PC
AT24C01A-10PI AT24C01A-10PI AT24C01A-10PI
AT24C08-10PC-2.7 AT24C08-10PC-2.7 AT24C08-10PC-2.7
AT24C16N-10SI AT24C16N-10SI AT24C16N-10SI
AT24C16N-10SC-2.7 AT24C16N-10SC-2.7 AT24C16N-10SC-2.7
AT24C16N-10SC AT24C16N-10SC AT24C16N-10SC
AT24C16-10PI AT24C16-10PI AT24C16-10PI
AT24C16-10PC-2.7 AT24C16-10PC-2.7 AT24C16-10PC-2.7
AT24C16-10PC AT24C16-10PC AT24C16-10PC
AT24C08N-10SI AT24C08N-10SI AT24C08N-10SI
AT24C08N-10SC-2.7 AT24C08N-10SC-2.7 AT24C08N-10SC-2.7
AT24C04-10PC-2.7 AT24C04-10PC-2.7 AT24C04-10PC-2.7
AT24C08-10PI AT24C08-10PI AT24C08-10PI
AT24C02N-10SI AT24C02N-10SI AT24C02N-10SI
AT24C08-10PC AT24C08-10PC AT24C08-10PC
AT24C04N-10SI-2.7 AT24C04N-10SI-2.7 AT24C04N-10SI-2.7
AT24C04N-10SC-2.7 AT24C04N-10SC-2.7 AT24C04N-10SC-2.7
AT24C04N-10SC AT24C04N-10SC AT24C04N-10SC
AT24C04N-10SI AT24C04N-10SI AT24C04N-10SI
AT24C04-10PI AT24C04-10PI AT24C04-10PI
AT24C04-10PC AT24C04-10PC AT24C04-10PC
AT24C02N-10SI-2.7 AT24C02N-10SI-2.7 AT24C02N-10SI-2.7
AT24C08N-10SC AT24C08N-10SC AT24C08N-10SC
PDF Datasheet Preview
• Low-voltage and Standard-voltage Operation VCC = 4.5V to 5.5V VCC = 2.7V to 5.5V VCC = 2.5V to 5.5V VCC = 1.8V to 5.5V
• Internally Organized 128 x 8 1K , 256 x 8 2K , 512 x 8 4K , 1024 x 8 8K or 2048 x 8 16K
• 2-wire Serial Interface
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• Bi-directional Data Transfer Protocol
• 100 kHz 1.8V, 2.5V, 2.7V and 400 kHz 5V Compatibility
• Write Protect Pin for Hardware Data Protection
• 8-byte Page 1K, 2K , 16-byte Page 4K, 8K, 16K Write Modes
• Partial Page Writes are Allowed
• Self-timed Write Cycle 10 ms max
• High-reliability

Endurance 1 Million Write Cycles Data Retention 100 Years
• Automotive Grade and Extended Temperature Devices Available
• 8-lead JEDEC SOIC, 8-pin PDIP and 8-lead TSSOP Packages

The AT24C01A/02/04/08/16 provides 1024/2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory EEPROM organized as 128/256/512/1024/2048 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The AT24C01A/02/04/08/16 is available in space-saving 8-pin PDIP, AT24C01A/02/04/08/16 , 8-lead TSSOP AT24C01A/02/04/08/16 and 8-lead JEDEC SOIC AT24C01A/02/04/08/16 packages and is accessed via a 2-wire serial interface. In addition, the entire family is available in 5.0V 4.5V to 5.5V , 2.7V 2.7V to 5.5V , 2.5V 2.5V to 5.5V and 1.8V 1.8V to 5.5V versions.

Pin Configurations

Pin Name A0 - A2 SDA SCL WP NC

Function Address Inputs Serial Data Serial Clock Input Write Protect No Connect
8-lead TSSOP

A0 1 A1 2 A2 3 GND 4
8 VCC 7 WP 6 SCL 5 SDA
2-wire Serial EEPROM
1K 128 x 8 2K 256 x 8 4K 512 x 8 8K 1024 x 8 16K 2048 x 8

AT24C01A AT24C02 AT24C04 AT24C08 AT24C16
8-pin PDIP

A0 1 A1 2 A2 3 GND 4
8 VCC 7 WP 6 SCL 5 SDA
8-lead SOIC

A0 1 A1 2 A2 3 GND 4
8 VCC 7 WP 6 SCL 5 SDA

Absolute Maximum Ratings

Operating -55°C to +125°C Storage Temperature -65°C to +150°C Voltage on Any Pin with Respect to Ground to +7.0V Maximum Operating Voltage 6.25V DC Output mA

Block Diagram
*NOTICE:

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Pin Description

SERIAL CLOCK SCL The SCL input is used to positive edge clock data into each EEPROM device and negative edge clock data out of each device.

SERIAL DATA SDA The SDA pin is bi-directional for serial data transfer. This pin is open-drain driven and may be wire-ORed with any number of other open-drain or open-collector devices.

DEVICE/PAGE ADDRESSES A2, A1, A0 The A2, A1 and A0 pins are device address inputs that are hard wired for the AT24C01A and the AT24C02. As many as eight 1K/2K devices may be addressed on a single bus system device addressing is discussed in detail under the Device Addressing section .

The AT24C04 uses the A2 and A1 inputs for hard wire addressing and a total of four 4K devices may be
addressed on a single bus system. The A0 pin is a no connect.

The AT24C08 only uses the A2 input for hardwire addressing and a total of two 8K devices may be addressed on a single bus system. The A0 and A1 pins are no connects.

The AT24C16 does not use the device address pins, which limits the number of devices on a single bus to one. The A0, A1 and A2 pins are no connects.

WRITE PROTECT WP The AT24C01A/02/04/16 has a Write Protect pin that provides hardware data protection. The Write Protect pin allows normal read/write operations when connected to ground GND . When the Write Protect pin is connected to VCC, the write protection feature is enabled and operates as shown in the following table.

AT24C01A/02/04/08/16

AT24C01A/02/04/08/16

WP Pin Status

At VCC

At GND

Part of the Array Protected
24C01A 24C02
AT24C01A Ordering Information
tWR max ms

ICC max µA
3000

ISB max µA
fMAX kHz
3000
1500
1500
1000
1000
Ordering Code AT24C01A-10PC AT24C01A-10SC AT24C01A-10TC AT24C01A-10PI AT24C01A-10SI AT24C01A-10TI AT24C01A-10PC-2.7 AT24C01A-10SC-2.7 AT24C01A-10TC-2.7 AT24C01A-10PI-2.7 AT24C01A-10SI-2.7 AT24C01A-10TI-2.7 AT24C01A-10PC-2.5 AT24C01A-10SC-2.5 AT24C01A-10TC-2.5 AT24C01A-10PI-2.5 AT24C01A-10SI-2.5 AT24C01A-10TI-2.5 AT24C01A-10PC-1.8 AT24C01A-10SC-1.8 AT24C01A-10TC-1.8 AT24C01A-10PI-1.8 AT24C01A-10SI-1.8 AT24C01A-10TI-1.8

Package 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T

Operation Range Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C
8P3 8S1 8T

Blank

Package Type 8-pin, Wide, Plastic Dual Inline Package PDIP 8-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC 8-lead, Wide, Thin Shrink Small Outline Package TSSOP

Options Standard Operation 4.5V to 5.5V Low-voltage 2.7V to 5.5V Low-voltage 2.5V to 5.5V Low-voltage 1.8V to 5.5V

AT24C01A/02/04/08/16

AT24C01A/02/04/08/16
AT24C02 Ordering Information
tWR max ms

ICC max µA
3000

ISB max µA
fMAX kHz
3000
1500
1500
1000
1000
Ordering Code AT24C02-10PC AT24C02N-10SC AT24C02-10TC AT24C02-10PI AT24C02N-10SI AT24C02-10TI AT24C02-10PC-2.7 AT24C02N-10SC-2.7 AT24C02-10TC-2.7 AT24C02-10PI-2.7 AT24C02N-10SI-2.7 AT24C02-10TI-2.7 AT24C02-10PC-2.5 AT24C02N-10SC-2.5 AT24C02-10TC-2.5 AT24C02-10PI-2.5 AT24C02N-10SI-2.5 AT24C02-10TI-2.5 AT24C02-10PC-1.8 AT24C02N-10SC-1.8 AT24C02-10TC-1.8 AT24C02-10PI-1.8 AT24C02N-10SI-1.8 AT24C02-10TI-1.8

Package 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T

Operation Range Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C
8P3 8S1 8T

Blank

Package Type 8-pin, Wide, Plastic Dual Inline Package PDIP 8-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC 8-lead, Wide, Thin Shrink Small Outline Package TSSOP

Options Standard Operation 4.5V to 5.5V Low-voltage 2.7V to 5.5V Low-voltage 2.5V to 5.5V Low-voltage 1.8V to 5.5V
AT24C04 Ordering Information
tWR max ms

ICC max µA
3000

ISB max µA
fMAX kHz
3000
1500
1500
1000
1000
Ordering Code AT24C04-10PC AT24C04N-10SC AT24C04-10TC AT24C04-10PI AT24C04N-10SI AT24C04-10TI AT24C04-10PC-2.7 AT24C04N-10SC-2.7 AT24C04-10TC-2.7 AT24C04-10PI-2.7 AT24C04N-10SI-2.7 AT24C04-10TI-2.7 AT24C04-10PC-2.5 AT24C04N-10SC-2.5 AT24C04-10TC-2.5 AT24C04-10PI-2.5 AT24C04N-10SI-2.5 AT24C04-10TI-2.5 AT24C04-10PC-1.8 AT24C04N-10SC-1.8 AT24C04-10TC-1.8 AT24C04-10PI-1.8 AT24C04N-10SI-1.8 AT24C04-10TI-1.8

Package 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T

Operation Range Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C
8P3 8S1 8T

Blank

Package Type 8-pin, Wide, Plastic Dual Inline Package PDIP 8-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC 8-lead, Wide, Thin Shrink Small Outline Package TSSOP

Options Standard Operation 4.5V to 5.5V Low-voltage 2.7V to 5.5V Low-voltage 2.5V to 5.5V Low-voltage 1.8V to 5.5V

AT24C01A/02/04/08/16

AT24C01A/02/04/08/16
AT24C08 Ordering Information
tWR max ms

ICC max µA
3000

ISB max µA
fMAX kHz
3000
1500
1500
1000
1000
Ordering Code AT24C08-10PC AT24C08N-10SC AT24C08-10TC AT24C08-10PI AT24C08N-10SI AT24C08-10TI AT24C08-10PC-2.7 AT24C08N-10SC-2.7 AT24C08-10TC-2.7 AT24C08-10PI-2.7 AT24C08N-10SI-2.7 AT24C08-10TI-2.7 AT24C08-10PC-2.5 AT24C08N-10SC-2.5 AT24C08-10TC-2.5 AT24C08-10PI-2.5 AT24C08N-10SI-2.5 AT24C08-10TI-2.5 AT24C08-10PC-1.8 AT24C08N-10SC-1.8 AT24C08-10TC-1.8 AT24C08-10PI-1.8 AT24C08N-10SI-1.8 AT24C08-10TI-1.8

Package 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T

Operation Range

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C
8P3 8S1 8T

Blank

Package Type 8-pin, Wide, Plastic Dual Inline Package PDIP 8-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC 8-lead, Wide, Thin Shrink Small Outline Package TSSOP

Options Standard Operation 4.5V to 5.5V Low-voltage 2.7V to 5.5V Low-voltage 2.5V to 5.5V Low-voltage 1.8V to 5.5V
AT24C16 Ordering Information
tWR max ms

ICC max µA
3000

ISB max µA
fMAX kHz
3000
1500
1500
1000
1000
Ordering Code AT24C16-10PC AT24C16N-10SC AT24C16-10TC AT24C16-10PI AT24C16N-10SI AT24C16-10TI AT24C16-10PC-2.7 AT24C16N-10SC-2.7 AT24C16-10TC-2.7 AT24C16-10PI-2.7 AT24C16N-10SI-2.7 AT24C16-10TI-2.7 AT24C16-10PC-2.5 AT24C16N-10SC-2.5 AT24C16-10TC-2.5 AT24C16-10PI-2.5 AT24C16N-10SI-2.5 AT24C16-10TI-2.5 AT24C16-10PC-1.8 AT24C16N-10SC-1.8 AT24C16-10TC-1.8 AT24C16-10PI-1.8 AT24C16N-10SI-1.8 AT24C16-10TI-1.8

Package 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T 8P3 8S1 8T

Operation Range Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C

Commercial 0°C to 70°C

Industrial -40°C to 85°C
8P3 8S1 8T

Blank

Package Type 8-pin, Wide, Plastic Dual Inline Package PDIP 8-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC 8-lead, Wide, Thin Shrink Small Outline Package TSSOP

Options Standard Operation 4.5V to 5.5V Low-voltage 2.7V to 5.5V Low-voltage 2.5V to 5.5V Low-voltage 1.8V to 5.5V

AT24C01A/02/04/08/16

Packaging Information
8P3, 8-pin, Wide, Plastic Dual Inline Package PDIP Dimensions in Inches and Millimeters

JEDEC STANDARD MS-001 BA

PIN 1

SEATING PLANE
8T, 8-lead, Plastic Thin Shrink Small Outline Package TSSOP Dimensions in Millimeters and Inches *

PIN 1
0 REF 8
*Controlling dimension millimeters

AT24C01A/02/04/08/16
8S1, 8-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC Dimensions in Inches and Millimeters

PIN 1

Atmel Headquarters

Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 TEL 408 441-0311 FAX 408 487-2600

Europe Atmel U.K., Ltd. Coliseum Business Centre Riverside Way Camberley, Surrey GU15 3YL England TEL 44 1276-686-677 FAX 44 1276-686-697

Asia Atmel Asia, Ltd. Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimhatsui East Kowloon Hong Kong TEL 852 2721-9778 FAX 852 2722-1369

Japan Atmel Japan K.K. 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL 81 3-3523-3551 FAX 81 3-3523-7581

Atmel Operations

Atmel Colorado Springs 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 719 576-3300 FAX 719 540-1759

Atmel Rousset Zone Industrielle 13106 Rousset Cedex France TEL 33 4-4253-6000 FAX 33 4-4253-6001

Fax-on-Demand North America 1- 800 292-8635 International 1- 408 441-0732
e-mail

Web Site

BBS 1- 408 436-4309

Atmel Corporation Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems.

Marks bearing and/or are registered trademarks and trademarks of Atmel Corporation. Terms and product names in this document may be trademarks of others.
More datasheets: AT24C16N-10SC-1.8 | AT24C16N-10SC-2.5 | AT24C08N-10SI-2.5 | AT24C01A-10SI-1.8 | AT24C02-10PI-2.5 | AT24C02N-10SI-1.8 | AT24C02-10PC-2.5 | AT24C01A-10SI-2.5 | AT24C02-10PI-1.8 | AT24C01A-10SC-2.5


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT24C01A-10SC-1.8 Datasheet file may be downloaded here without warranties.

Datasheet ID: AT24C01A-10SC-1.8 518873