AT24C04Y1-10YI-1.8

AT24C04Y1-10YI-1.8 Datasheet


The AT24C01A/02/04/08/16 provides 1024/2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory EEPROM organized as 128/256/512/1024/2048 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The AT24C01A/02/04/08/16 is available in space-saving 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead MAP, 5-lead SOT23 AT24C01A/AT24C02/AT24C04 , 8lead TSSOP and 8-ball dBGA2 packages and is accessed via a 2-wire serial interface. In addition, the entire family is available in 2.7V 2.7V to 5.5V and 1.8V 1.8V to 5.5V versions.

Part Datasheet
AT24C04Y1-10YI-1.8 AT24C04Y1-10YI-1.8 AT24C04Y1-10YI-1.8 (pdf)
Related Parts Information
AT24C16N-10SI-1.8 AT24C16N-10SI-1.8 AT24C16N-10SI-1.8
AT24C08N-10SI-1.8 AT24C08N-10SI-1.8 AT24C08N-10SI-1.8
AT24C08-10PI-1.8 AT24C08-10PI-1.8 AT24C08-10PI-1.8
AT24C16-10PI-1.8 AT24C16-10PI-1.8 AT24C16-10PI-1.8
AT24C16-10TI-1.8 AT24C16-10TI-1.8 AT24C16-10TI-1.8
AT24C16-10PI-2.7 AT24C16-10PI-2.7 AT24C16-10PI-2.7
AT24C08-10TI-1.8 AT24C08-10TI-1.8 AT24C08-10TI-1.8
AT24C08-10TI-2.7 AT24C08-10TI-2.7 AT24C08-10TI-2.7
AT24C16-10TI-2.7 AT24C16-10TI-2.7 AT24C16-10TI-2.7
AT24C04Y1-10YI-2.7 AT24C04Y1-10YI-2.7 AT24C04Y1-10YI-2.7
AT24C01AY1-10YU-2.7 AT24C01AY1-10YU-2.7 AT24C01AY1-10YU-2.7
AT24C16N-10SI-2.7 AT24C16N-10SI-2.7 AT24C16N-10SI-2.7
AT24C08N-10SI-2.7 AT24C08N-10SI-2.7 AT24C08N-10SI-2.7
AT24C08-10PI-2.7 AT24C08-10PI-2.7 AT24C08-10PI-2.7
PDF Datasheet Preview
• Low-voltage and Standard-voltage Operation VCC = 2.7V to 5.5V VCC = 1.8V to 5.5V
• Internally Organized 128 x 8 1K , 256 x 8 2K , 512 x 8 4K , 1024 x 8 8K or 2048 x 8 16K
• 2-wire Serial Interface
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• Bi-directional Data Transfer Protocol
• 100 kHz 1.8V and 400 kHz 2.5V, 2.7V, 5V Compatibility
• Write Protect Pin for Hardware Data Protection
• 8-byte Page 1K, 2K , 16-byte Page 4K, 8K, 16K Write Modes
• Partial Page Writes are Allowed
• Self-timed Write Cycle 5 ms max
• High-reliability

Endurance 1 Million Write Cycles

Data Retention 100 Years
• Automotive Grade, Extended Temperature and Lead-free/Halogen-free Devices

Available
• 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead MAP, 5-lead SOT23,
8-lead TSSOP and 8-ball dBGA2 Packages

The AT24C01A/02/04/08/16 provides 1024/2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory EEPROM organized as 128/256/512/1024/2048 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The AT24C01A/02/04/08/16 is available in space-saving 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead MAP, 5-lead SOT23 AT24C01A/AT24C02/AT24C04 , 8lead TSSOP and 8-ball dBGA2 packages and is accessed via a 2-wire serial interface. In addition, the entire family is available in 2.7V 2.7V to 5.5V and 1.8V 1.8V to 5.5V versions.
8-lead TSSOP
8-lead SOIC

Pin Configurations

Pin Name A0 - A2 SDA

Function Address Inputs Serial Data

A0 1 A1 2 A2 3 GND 4
8 VCC
6 SCL
5 SDA GND 4
8 VCC 7 WP 6 SCL 5 SDA

SCL WP NC GND VCC

Serial Clock Input Write Protect No Connect Ground Power Supply
8-ball dBGA2

VCC 8 WP 7 SCL 6 SDA 5
1 A0 2 A1 3 A2 4 GND

Bottom View
8-lead MAP

VCC 8 WP 7 SCL 6 SDA 5
1 A0 2 A1 3 A2 4 GND

Bottom View
2-wire Serial EEPROM
1K 128 x 8
2K 256 x 8
4K 512 x 8
8K 1024 x 8
16K 2048 x 8

AT24C01A AT24C02 AT24C04 AT24C08 1 AT24C16 2

Note This device is not recommended for new designs. Please refer to AT24C08A.

This device is not recommended for new designs. Please refer to AT24C16A.
8-lead PDIP

A0 1 A1 2 A2 3 GND 4
8 VCC 7 WP 6 SCL 5 SDA
5-lead SOT23
AT24C01A Ordering Information
Ordering Code

Package

Operation Range

AT24C01A-10PI-2.7 AT24C01A-10SI-2.7 AT24C01A-10TI-2.7 AT24C01AY1-10YI-2.7

AT24C01A-10TSI-2.7

AT24C01AR-10TSI-2.7

AT24C01AU3-10UI-2.7
8P3 8S1 8A2 8Y1
5TS1
5TS1
8U3-1

Industrial -40°C to 85°C

AT24C01A-10PI-1.8 AT24C01A-10SI-1.8 AT24C01A-10TI-1.8 AT24C01AY1-10YI-1.8

AT24C01A-10TSI-1.8

AT24C01AU3-10UI-1.8
8P3 8S1 8A2 8Y1
5TS1
8U3-1

Industrial -40°C to 85°C

AT24C01A-10SU-2.7

AT24C01A-10SU-1.8

AT24C01A-10TU-2.7

AT24C01A-10TU-1.8

Lead-free/Halogen-free/ Industrial Temperature
-40°C to 85°C

AT24C01A-10SE-2.7

High Grade/Extended Temp 8S1
-40°C to 125°C

AT24C01A-10SQ-2.7

Lead-free/Halogen-free/

High Grade/Extended Temp
-40°C to 125°C

Note For 2.7V devices used in the 4.5V to 5.5V range, please refer to performance values in the AC and DC characteristics table.
8P3 8S1 8A2 8Y1 5TS1 8U3-1

Package Type 8-lead, Wide, Plastic Dual Inline Package PDIP 8-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC 8-lead, Wide, Thin Shrink Small Outline Package TSSOP 8-lead, mm x mm Body, Dual Footprint, Non-leaded, Miniature Array Package MAP 5-lead, mm x mm Body, Plastic Thin Shrink Small Outline Package SOT23 8-ball, die Ball Grid Away Package dBGA2

Options Low-voltage 2.7V to 5.5V Low-voltage 1.8V to 5.5V Rotated Pinout
AT24C02 Ordering Information
Ordering Code

Package

Operation Range

AT24C02-10PI-2.7 AT24C02N-10SI-2.7 AT24C02-10TI-2.7 AT24C02Y1-10YI-2.7

AT24C02-10TSI-2.7

AT24C02U3-10UI-2.7
8P3 8S1 8A2 8Y1
5TS1
8U3-1

Industrial -40°C to 85°C

AT24C02-10PI-1.8 AT24C02N-10SI-1.8 AT24C02-10TI-1.8 AT24C02Y1-10YI-1.8

AT24C02-10TSI-1.8

AT24C02U3-10UI-1.8
8P3 8S1 8A2 8Y1
5TS1
8U3-1

Industrial -40°C to 85°C

AT24C02N-10SU-2.7

AT24C02N-10SU-1.8

AT24C02-10TU-2.7

AT24C02-10TU-1.8

Lead-free/Halogen-free/ Industrial Temperature
-40°C to 85°C

AT24C02N-10SE-2.7

High Grade/Extended Temp 8S1
-40°C to 125°C

AT24C02N-10SQ-2.7

Lead-free/Halogen-free/

High Grade/Extended Temp
-40°C to 125°C

Note For 2.7V devices used in the 4.5V to 5.5V range, please refer to performance values in the AC and DC characteristics table.
8P3 8S1 8A2 8Y1 5TS1 8U3-1

Package Type 8-lead, Wide, Plastic Dual Inline Package PDIP 8-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC 8-lead, Wide, Thin Shrink Small Outline Package TSSOP 8-lead, mm x mm Body, Dual Footprint, Non-leaded, Miniature Array Package MAP 5-lead, mm x mm Body, Plastic Thin Shrink Small Outline Package SOT23 8-ball, die Ball Grid Away Package dBGA2

Options Low-voltage 2.7V to 5.5V Low-voltage 1.8V to 5.5V
14 AT24C01A/02/04/08/16

AT24C01A/02/04/08/16
AT24C04 Ordering Information
Ordering Code

AT24C04-10PI-2.7 AT24C04N-10SI-2.7 AT24C04-10TI-2.7 AT24C04Y1-10YI-2.7 AT24C04-10TSI-2.7 AT24C04U3-10UI-2.7

Package
8P3 8S1 8A2 8Y1 5TS1 8U3-1

Operation Range Industrial
-40°C to 85°C

AT24C04-10PI-1.8 AT24C04N-10SI-1.8 AT24C04-10TI-1.8 AT24C04Y1-10YI-1.8 AT24C04-10TSI-1.8 AT24C04U3-10UI-1.8
8P3 8S1 8A2 8Y1 5TS1 8U3-1

Industrial -40°C to 85°C

AT24C04N-10SU-2.7

AT24C04N-10SU-1.8

AT24C04-10TU-2.7

AT24C04-10TU-1.8

Lead-free/Halogen-free/ Industrial Temperature
-40°C to 85°C

AT24C04N-10SE-2.7

High Grade/Extended Temp
-40°C to 125°C

AT24C04N-10SQ-2.7

Lead-free/Halogen-free/

High Grade/Extended Temp
-40°C to 125°C

Note For 2.7V devices used in the 4.5V to 5.5V range, please refer to performance values in the AC and DC characteristics table.
8P3 8S1 8A2 8Y1 5TS1 8U3-1

Package Type 8-lead, Wide, Plastic Dual Inline Package PDIP 8-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC 8-lead, Wide, Thin Shrink Small Outline Package TSSOP 8-lead, mm x mm Body, Dual Footprint, Non-leaded, Miniature Array Package MAP 5-lead, mm x mm Body, Plastic Thin Shrink Small Outline Package SOT23 8-ball, die Ball Grid Away Package dBGA2

Options Low-voltage 2.7V to 5.5V Low-voltage 1.8V to 5.5V
AT24C08 2 Ordering Information
Ordering Code

Package

Operation Range

AT24C08-10PI-2.7

AT24C08N-10SI-2.7

AT24C08-10TI-2.7

Industrial -40°C to 85°C

AT24C08-10PI-1.8

AT24C08N-10SI-1.8

AT24C08-10TI-1.8

Industrial -40°C to 85°C

Notes For 2.7V devices used in the 4.5V to 5.5V range, please refer to performance values in the AC and DC characteristics table. This device is not recommended for new designs. Please refer to AT24C08A.

Package Type
8-lead, Wide, Plastic Dual Inline Package PDIP
8-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC
8-lead, Wide, Thin Shrink Small Outline Package TSSOP

Options

Low-voltage 2.7V to 5.5V

Low-voltage 1.8V to 5.5V
16 AT24C01A/02/04/08/16

AT24C01A/02/04/08/16
AT24C16 2 Ordering Information
Ordering Code

Package

Operation Range

AT24C16-10PI-2.7

AT24C16N-10SI-2.7

AT24C16-10TI-2.7

Industrial -40°C to 85°C

AT24C16-10PI-1.8

AT24C16N-10SI-1.8

AT24C16-10TI-1.8

Industrial -40°C to 85°C

Notes For 2.7V devices used in the 4.5V to 5.5V range, please refer to performance values in the AC and DC characteristics table. This device is not recommended for new designs. Please refer to AT24C16A.

Package Type
8-lead, Wide, Plastic Dual Inline Package PDIP
8-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC
8-lead, Wide, Thin Shrink Small Outline Package TSSOP

Options

Low-voltage 2.7V to 5.5V

Low-voltage 1.8V to 5.5V

Packaging Information
8P3 PDIP

Top View

End View
4 PLCS

Side View

COMMON DIMENSIONS Unit of Measure = inches

SYMBOL A A2 b b2 b3 c D D1 E E1 e eA L

MIN NOM MAX

NOTE 2

This drawing is for general information only refer to JEDEC Drawing MS-001, Variation BA for additional information. Dimensions A and L are measured with the package seated in JEDEC seating plane Gauge GS-3. D, D1 and E1 dimensions do not include mold Flash or protrusions. Mold Flash or protrusions shall not exceed inch. E and eA measured with the leads constrained to be perpendicular to datum. Pointed or rounded lead tips are preferred to ease insertion. b2 and b3 maximum dimensions do not include Dambar protrusions. Dambar protrusions shall not exceed mm .
01/09/02
2325 Orchard Parkway R San Jose, CA 95131

TITLE 8P3, 8-lead, Wide Body, Plastic Dual In-line Package PDIP
18 AT24C01A/02/04/08/16
8S1 JEDEC SOIC

AT24C01A/02/04/08/16

Top View

Side View

End View

COMMON DIMENSIONS Unit of Measure = mm

SYMBOL A A1 b C D E1 E L
More datasheets: 17000654A | AT24C16N-10SI-1.8 | AT24C08N-10SI-1.8 | AT24C08-10PI-1.8 | AT24C16-10PI-1.8 | AT24C16-10TI-1.8 | AT24C16-10PI-2.7 | AT24C08-10TI-1.8 | AT24C08-10TI-2.7 | AT24C16-10TI-2.7


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT24C04Y1-10YI-1.8 Datasheet file may be downloaded here without warranties.

Datasheet ID: AT24C04Y1-10YI-1.8 518871