The AT24C01 provides 1024 bits of serial electrically erasable and programmable read only memory EEPROM organized as 128 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low power and low voltage operation are essential. The AT24C01 is available in space saving 8-lead PDIP, 8-lead JEDEC SOIC and 8-lead TSSOP packages and is accessed via a 2-wire serial interface. In addition, the entire family is available in 2.7V 2.7V to 5.5V and 1.8V 1.8V to 5.5V versions.
Part | Datasheet |
---|---|
![]() |
AT24C01-10SI-2.7 (pdf) |
Related Parts | Information |
---|---|
![]() |
AT24C01-10PI-1.8 |
![]() |
AT24C01-10SI-1.8 |
![]() |
AT24C01-10TI-2.7 |
![]() |
AT24C01-10PI-2.7 |
PDF Datasheet Preview |
---|
• Low Voltage and Standard Voltage Operation VCC = 2.7V to 5.5V VCC = 1.8V to 5.5V • Internally Organized 128 x 8 • 2-Wire Serial Interface • Bidirectional Data Transfer Protocol • 100 kHz 1.8V, 2.5V, 2.7V and 400 kHz 5V Compatibility • 4-Byte Page Write Mode • Self-Timed Write Cycle 10 ms max • High Reliability Endurance 1 Million Write Cycles Data Retention 100 Years • Automotive Grade, Extended Temperature and Lead-Free Devices Available • 8-lead PDIP, 8-lead JEDEC SOIC and 8-lead TSSOP Packages The AT24C01 provides 1024 bits of serial electrically erasable and programmable read only memory EEPROM organized as 128 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low power and low voltage operation are essential. The AT24C01 is available in space saving 8-lead PDIP, 8-lead JEDEC SOIC and 8-lead TSSOP packages and is accessed via a 2-wire serial interface. In addition, the entire family is available in 2.7V 2.7V to 5.5V and 1.8V 1.8V to 5.5V versions. 2-Wire Serial EEPROM 1K 128 x 8 AT24C01 Pin Configurations Pin Name NC SDA SCL TEST Function No Connect Serial Data Serial Clock Input Test Input GND or VCC 8-lead PDIP NC 1 NC 2 NC 3 GND 4 8 VCC 7 TEST 6 SCL 5 SDA NC GND 8-lead TSSOP VCC TEST SCL SDA 8-lead SOIC NC 1 NC 2 NC 3 GND 4 8 VCC 7 TEST 6 SCL 5 SDA Absolute Maximum Ratings* Operating -55°C to +125°C Storage Temperature -65°C to +150°C Voltage on Any Pin with Respect to Ground to +7.0V Maximum Operating Voltage 6.25V DC Output mA Block Diagram *NOTICE: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2 AT24C01 AT24C01 Pin Description SERIAL CLOCK SCL The SCL input is used to positive edge clock data into each EEPROM device and negative edge clock data out of each device. SERIAL DATA SDA The SDA pin is bidirectional for serial data transfer. This pin is open-drain driven and may be wire-ORed with any number of other open-drain or open collector devices. Memory Organization AT24C01, 1K SERIAL EEPROM Internally organized with 128 pages of 1 byte each. The 1K requires a 7-bit data word address for random word addressing. Pin Capacitance Applicable over recommended operating range from TA = 25°C, f = MHz, VCC = +1.8V. Symbol Test Condition CI/O Input/Output Capacitance SDA Input Capacitance A0, A1, A2, SCL Units pF Condition VI/O = 0V VIN = 0V DC Characteristics Applicable over recommended operating range from TAI = -40°C to +85°C, VCC = +1.8V to +5.5V, TAE = -40°C to +125°C, VCC = +1.8V to +5.5V unless otherwise noted . Ordering Information Ordering Code Package Operation Range AT24C01-10PI-2.7 AT24C01-10SI-2.7 AT24C01-10TI-2.7 Industrial -40°C to 85°C AT24C01-10PI-1.8 AT24C01-10SI-1.8 AT24C01-10TI-1.8 Industrial -40°C to 85°C AT24C01-10SJ-2.7 AT24C01-10SJ-1.8 Lead-Free/Industrial Temperature -40°C to 85°C AT24C01-10SE-2.7 High Grade/Extended Temperature -40°C to 125°C Note For 2.7V devices used in the 4.5V to 5.5V range, please refer to performance values in the AC and DC Characteristics tables. Package Type 8-lead, Wide, Plastic Dual Inline Package PDIP 8-lead, Wide, Plastic Gull Wing Small Outline JEDEC SOIC 8-lead, Wide, Thin Shrink Small Outline Package TSSOP Options Low-Voltage 2.7V to 5.5V Low-Voltage 1.8V to 5.5V 10 AT24C01 Packaging Information 8P3 PDIP AT24C01 Top View End View 4 PLCS Side View COMMON DIMENSIONS Unit of Measure = inches SYMBOL A A2 b b2 b3 c D D1 E E1 e eA L MIN NOM MAX NOTE 2 This drawing is for general information only refer to JEDEC Drawing MS-001, Variation BA for additional information. Dimensions A and L are measured with the package seated in JEDEC seating plane Gauge GS-3. D, D1 and E1 dimensions do not include mold Flash or protrusions. Mold Flash or protrusions shall not exceed inch. E and eA measured with the leads constrained to be perpendicular to datum. Pointed or rounded lead tips are preferred to ease insertion. b2 and b3 maximum dimensions do not include Dambar protrusions. Dambar protrusions shall not exceed mm . 01/09/02 2325 Orchard Parkway R San Jose, CA 95131 TITLE 8P3, 8-lead, Wide Body, Plastic Dual In-line Package PDIP 8S1 JEDEC SOIC Top View |
More datasheets: BZX84C3V9TS-7-F | HSMB-C170 | HSMB-C190 | HSMB-C150 | HSMB-C110 | 1967 | AT24C01-10PI-1.8 | AT24C01-10SI-1.8 | AT24C01-10TI-2.7 | AT24C01-10PI-2.7 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT24C01-10SI-2.7 Datasheet file may be downloaded here without warranties.