AT17C010A-10JI
AT17C010A-10JI Datasheet
The AT17C512A/010A and AT17LV512A/010A high-density AT17A Series FPGA Configuration EEPROMs Configurators provide an easy-to-use, cost-effective configuration memory for programming Altera devices. The AT17C512A/LV512A devices are packaged in the popular 8-lead PDIP and the 20-lead PLCC the AT17C010A/LV010A are packaged in the popular 8-lead PDIP, the 20-lead PLCC and the 32-lead TQFP. The AT17A Series family uses a simple serial-access procedure to configure one or more FPGA devices. The AT17A Series organization supplies enough memory to configure one or multiple smaller FPGAs. Using a feature of the AT17A Series, the user can select the polarity of the reset function by programming four EEPROM bytes. The AT17A parts generate their own internal clock by default and can be used as a system “master” for loading the FPGA devices. The internal clock can be disabled by the industrial programmer to allow the AT17A parts to be used as system “slave”, so that the external devices will provide the clock for loading the FPGA devices.
| Part | Datasheet |
|---|---|
AT17C010A-10JI |
AT17C010A-10JI (pdf) |
| Related Parts | Information |
|---|---|
AT17C512A-10JI |
AT17C512A-10JI |
AT17C512A-10JC |
AT17C512A-10JC |
AT17C010A-10PC |
AT17C010A-10PC |
AT17C010A-10JC |
AT17C010A-10JC |
|
AT17C010A-10PI |
AT17C010A-10PI |
|
AT17C010A-10QC |
AT17C010A-10QC |
|
AT17C010A-10QI |
AT17C010A-10QI |
| PDF Datasheet Preview |
|---|
| • Serial EEPROM Family for Configuring Altera Devices • Simple Interface to SRAM FPGAs • EE Programmable 512-Kbit and 1-Mbit Serial Memories Designed to Store Configuration Programs for Field Programmable Gate Arrays FPGAs • Cascadable Read Back to Support Additional Configurations or Future Higher-density Arrays • Low-power CMOS EEPROM Process • Programmable Reset Polarity • Available in the Space-efficient Surface-mount PLCC and PDIP Packages for the 512-Kbit device and PLCC, PDIP and TQFP Packages for the 1-Mbit Device • In-System Programmable via 2-wire Bus • Emulation of Atmel’s AT24CXXX Serial EEPROMs • Available in 3.3V ± 10% LV and 5V ± 5% C Versions • System-friendly READY Pin The AT17C512A/010A and AT17LV512A/010A high-density AT17A Series FPGA Configuration EEPROMs Configurators provide an easy-to-use, cost-effective configuration memory for programming Altera devices. The AT17C512A/LV512A devices are packaged in the popular 8-lead PDIP and the 20-lead PLCC the AT17C010A/LV010A are packaged in the popular 8-lead PDIP, the 20-lead PLCC and the 32-lead TQFP. The AT17A Series family uses a simple serial-access procedure to configure one or more FPGA devices. The AT17A Series organization supplies enough memory to configure one or multiple smaller FPGAs. Using a feature of the AT17A Series, the user can select the polarity of the reset function by programming four EEPROM bytes. The AT17A parts generate their own internal clock by default and can be used as a system “master” for loading the FPGA devices. The internal clock can be disabled by the industrial programmer to allow the AT17A parts to be used as system “slave”, so that the external devices will provide the clock for loading the FPGA devices. The Atmel devices also support a system-friendly READY pin for the 20-lead PLCC package and a write protect mechanism for all packages. The READY pin is used to simplify system power-up considerations. The WP1 pin is used to protect part of the Configurator memory during in-system programming. The AT17A Series Configurator can be programmed with industry-standard programmers, Atmel’s ATDH2200E Programming Kit or Atmel’s ATDH2225 ISP cable. FPGA Configuration EEPROM Memory 512-kilobit and 1-megabit Altera Pinout AT17C512A AT17LV512A AT17C010A AT17LV010A Pin Configuration 8-lead PDIP DATA 1 DCLK 2 OE 3 nCS 4 8 VCC 7 SER_EN 6 A2 nCASC 5 GND 20-lead PLCC 3 NC 2 DATA 1 NC 20 VCC 19 NC DCLK 4 WP1 5 NC 6 NC 7 OE 8 18 SER_EN 17 NC 16 NC 15 READY 14 NC nCS 9 GND 10 NC 11 A2 nCASC 12 NC 13 32-lead TQFP 1 32 NC 31 DATA 30 NC 29 NC 28 NC 27 VCC 26 NC 25 NC NC 1 DCLK 2 NC 3 WP1 4 NC 5 NC 6 OE 7 NC 8 24 NC 23 SER_EN 22 NC 21 NC 20 READY 19 NC 18 NC 17 NC NC 9 nCS 10 NC 11 GND 12 NC 13 NC 14 A2 nCASC 15 NC 16 Note The 32-lead TQFP package is not available for AT17C512A/LV512A devices. 2 AT17C/LV512A/010A Block Diagram SER_EN WP1 OSC CONTROL POWER ON RESET PROGRAMMING MODE LOGIC ROW ADDRESS COUNTER BIT COUNTER AT17C/LV512A/010A Ordering Information 5V Devices Memory Size 512-Kbit 1 Ordering Code AT17C512A-10PC AT17C512A-10JC AT17C512A-10PI AT17C512A-10JI 1-Mbit 2 AT17C010A-10PC AT17C010A-10JC AT17C010A-10QC AT17C010A-10PI AT17C010A-10JI AT17C010A-10QI Notes Use 512-Kbit density parts to replace Altera EPC1441. Use 1-Mbit density parts to replace Altera EPC1. Ordering Information 3.3V Devices Memory Size 512-Kbit 1 Ordering Code AT17LV512A-10PC AT17LV512A-10JC AT17LV512A-10PI AT17LV512A-10JI 1-Mbit 2 AT17LV010A-10PC AT17LV010A-10JC AT17LV010A-10QC AT17LV010A-10PI AT17LV010A-10JI AT17LV010A-10QI Notes Use 512-Kbit density parts to replace Altera EPC1441. Use 1-Mbit density parts to replace Altera EPC1. Package 8P3 20J 8P3 20J 8P3 20J 32A 8P3 20J 32A Package 8P3 20J 8P3 20J 8P3 20J 32A 8P3 20J 32A Operation Range Commercial 0°C to 70°C Industrial -40°C to 85°C Commercial 0°C to 70°C Industrial -40°C to 85°C Operation Range Commercial 0°C to 70°C Industrial -40°C to 85°C Commercial 0°C to 70°C Industrial -40°C to 85°C Package Type 8-lead, Wide, Plastic Dual Inline Package PDIP 20-lead, Plastic J-leaded Chip Carrier PLCC 32-lead, Thin mm Plastic Gull Wing Quad Flat Package TQFP Packaging Information 8P3, 8-lead, Wide, Plastic Dual Inline Package PDIP Dimensions in Inches and Millimeters JEDEC STANDARD MS-018 AA 20J, 20-lead, Plastic J-leaded Chip Carrier PLCC Dimensions in Inches and Millimeters JEDEC STANDARD MS-018 AA 32A, 32-lead, Thin mm Plastic Gull Wing Quad Flat package TQFP Dimensions in Millimeters and Inches PIN 1 ID 14 AT17C/LV512A/010A Atmel Headquarters Corporate Headquarters 2325 Orchard Parkway San Jose, CA 95131 TEL 408 441-0311 FAX 408 487-2600 Europe Atmel SarL Route des Arsenaux 41 Casa Postale 80 CH-1705 Fribourg Switzerland TEL 41 26-426-5555 FAX 41 26-426-5500 Asia Atmel Asia, Ltd. Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimhatsui East Kowloon Hong Kong TEL 852 2721-9778 FAX 852 2722-1369 Japan Atmel Japan K.K. 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan TEL 81 3-3523-3551 FAX 81 3-3523-7581 Atmel Product Operations Atmel Colorado Springs 1150 E. Cheyenne Mtn. Blvd. Colorado Springs, CO 80906 TEL 719 576-3300 FAX 719 540-1759 Atmel Grenoble Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex, France TEL 33 4-7658-3000 FAX 33 4-7658-3480 Atmel Heilbronn Theresienstrasse 2 POB 3535 D-74025 Heilbronn, Germany TEL 49 71 31 67 25 94 FAX 49 71 31 67 24 23 Atmel Nantes La Chantrerie BP 70602 44306 Nantes Cedex 3, France TEL 33 0 2 40 18 FAX 33 0 2 40 18 19 60 Atmel Rousset Zone Industrielle 13106 Rousset Cedex, France TEL 33 4-4253-6000 FAX 33 4-4253-6001 Atmel Smart Card ICs Scottish Enterprise Technology Park East Kilbride, Scotland G75 0QR TEL 44 1355-357-000 FAX 44 1355-242-743 Atmel Configurator Hotline 408 436-4119 Atmel Configurator e-mail |
| More datasheets: 2692 | DESD5V0V1BDLP3-7 | DKWF121 | AT17C512A-10JI | AT17C512A-10JC | AT17C010A-10PC | AT17C010A-10JC | AT17C010A-10PI | AT17C010A-10QC | AT17C010A-10QI |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AT17C010A-10JI Datasheet file may be downloaded here without warranties.