ATDM2100SN

ATDM2100SN Datasheet


FPGA Physical Design System ATDS2100PC/ATDS2100SN

Part Datasheet
ATDM2100SN ATDM2100SN ATDM2100SN (pdf)
Related Parts Information
ATDM2160HP ATDM2160HP ATDM2160HP
ATDS2120PCI ATDS2120PCI ATDS2120PCI
ATDM2100PC ATDM2100PC ATDM2100PC
ATDM2101PC ATDM2101PC ATDM2101PC
ATDM2110PC ATDM2110PC ATDM2110PC
ATDM2110PCI ATDM2110PCI ATDM2110PCI
ATDM2120PC ATDM2120PC ATDM2120PC
ATDM2120SN ATDM2120SN ATDM2120SN
ATDM2140PC ATDM2140PC ATDM2140PC
ATDM2140SN ATDM2140SN ATDM2140SN
ATDM2150HP ATDM2150HP ATDM2150HP
ATDM2150SN ATDM2150SN ATDM2150SN
ATDM2160SN ATDM2160SN ATDM2160SN
ATDM2170HP ATDM2170HP ATDM2170HP
ATDM2170SN ATDM2170SN ATDM2170SN
ATDM2180HP ATDM2180HP ATDM2180HP
ATDM2180PC ATDM2180PC ATDM2180PC
ATDM2180SN ATDM2180SN ATDM2180SN
ATDS2100SNU ATDS2100SNU ATDS2100SNU
ATDS2101PC ATDS2101PC ATDS2101PC
ATDS2110PC ATDS2110PC ATDS2110PC
ATDM2100HP ATDM2100HP ATDM2100HP
ATDS2120PC ATDS2120PC ATDS2120PC
ATDM2120PCI ATDM2120PCI ATDM2120PCI
ATDS2120SN ATDS2120SN ATDS2120SN
ATDS2110PCI ATDS2110PCI ATDS2110PCI
ATDM2140HP ATDM2140HP ATDM2140HP
PDF Datasheet Preview
FPGA Overview

Support for Industry Standard PC and Workstation CAE tools
• Combination Schematic, VHLD, PLD design entry
• Macro Library of Over 200 Hard/Soft Functions
• Automatic Macro Generators Generate Physical Layout
• Floor Planning Capability
• Automatic Place and Route
• Interactive Layout Editing
• Advanced Timing Analysis
100% logical path coverage No user-vector generation Displays set-up/hold violations & speed critical paths Full Back-Annotation for Functional & Timing Simulation
• Graphical User Interface
• Unified Design Database

Atmel’s Integrated Development System lets designers create fast, predictable designs with AT6000 Series FPGAs.

Available for use on 486/Pentium, Sun Sparc, or HP workstation-based computers, the Integrated Development System combines industry-standard software for design entry and simulation with Atmel’s proprietary software for component generation, automatic and interactive placement and routing, timing analysis, and bit stream generation.

The Integrated Development System design flow is shown below. Pre-layout modules verify design logic, place and route modules implement the design, and post-layout modules reflect the design as it actually appears in silicon.

A Design Manager provides push-button access to each step in the flow. The Design Manager’s simple user interface streamlines the design flow as it creates a seamless design environment. Design data is stored in a unified database that eliminates the need for data re-entry and translation.

The Integrated Development System Physical Design System includes a prototype kit and Viewlogic PRO Series PC or PowerView Sun macro libraries. Viewlogic timing and functional simulation is optional. Mentor, Verilog, Synopsys, Cadence, and Exemplar library/interface packages are also available.

Integrated Development System

AT6000 FPGA Integrated Development System Overview

FPGA Integrated Development System Overview
0438B
4-25

AT6000 FPGA System Summary

The following is a summary of Integrated Development System software, hardware, and annual maintenance agreements. Detailed technical information is contained in the individual product data sheets.

Atmel offers specially-priced University systems for selected PC and Sun packages.

FPGA Physical Design System ATDS2100PC/ATDS2100SN

The AT6000 Physical Design System includes the Atmel Design Manager with PLD interface and macro libraries for Viewlogic schematic capture synthesis and functional simulation. Tools are included for macro generation, interactive editing, design rule checking, automatic placement and routing, timing analysis, bitstream generation, and PROM file generation.

Base PC and Sun system requirements for the Physical Design System are listed on the next page.

Physical Design System/Viewlogic Standalone Packages.

Several AT6000 Series design tool packages combine the Physical Design System with Viewlogic schematic capture and functional simulation options.

PC-based packages

Viewlogic’s PRO series for the PC includes PROcapture schematic entry , PROsim gate simulation , and PROsynthesis text-based entry .

Atmel offers the following PRO series packages:
• ATDS2101PC. AT6000 Series Physical Design System with PROcapture Schematic Entry
• ATDS2110PC. AT6000 Series Physical Design System with PROcapture and PROSim Gate Simulation 10K gates
• ATDS2120PC. AT6000 Series Physical Design System with PROcapture and PROSim Gate Simulation 20K gates

Customers with Viewlogic restricted licenses may purchase an Atmel 10K or 20K AT6000 Series Design System & Viewlogic restricted license upgrade.

A University system without a prototype kit is available for the ATDS2100PC and ATDS2110PC.
• ATDS2130PC. Viewlogic PROsynthesis, PROsimVDHL Libraries & Interface for AT6000 Series Design System

Sun-based packages Viewlogic’s design tool family for Sun workstations is called Powerview, and the schematic entry, gate simulation, and text-based entry options are called ViewDraw, ViewSim, and ViewSynthesis.

Atmel offers the following Powerview packages
• ATDS2120SN. AT6000 Physical Design System with

Powerview Schematic Entry and Viewlogic Simulator 20K gates
• ATDS2130SN. Viewlogic Viewsynthesis, ViewSimVDHL Libraries & Interface for AT6000 Series Design System

A University system is available for the ATDS2120SN.

Library and Interface packages Atmel offers several library and interface packages for customers who wish to use the AT6000 Series Physical Design System with third-party software from other companies:

PC-based library/interface package ATDS2140PC. Exemplar Library & Interface for AT6000 Series Design System

Sun-based library/interface packages ATDS2140SN. Exemplar Library & Interface for AT6000 Series Design System

ATDS2150SN. Mentor Library & Interface for AT6000 Series Design System
Annual Maintenance Agreements Annual Maintenance Agreements are available for each package and option in the Integrated Development System. The first year of maintenance is included in the purchase price renewal is optional. Maintenance Agreements give users direct access to Atmel’s experienced technical support staff and cover software upgrades that keep engineers on the leading edge of Atmel’s design tools. See the individual product data sheets for ordering and pricing information.

Extended maintenance agreements are not available for University systems.
4-26 FPGA Overview

FPGA Overview

Prototype Kit

A Prototyping Kit is included in all PC Physical Design System packages, except University systems. Additional Prototype Kits can be ordered separately. Each kit includes a cable for downloading configuration data to a device and an AT-style board for prototyping designs.

Atmel now offers both 84-pin and 132-pin download boards for use with the Prototype Kit or the designer’s target system. The boards can be attached to a host PC running the AT6000 series software.

Automatic Macro Generators

The AT6000 Physical Design System includes an innovative tool that allows users to create from a large number of datapath functions multipliers, adders, accumulators .

The user specifies the parameters and the software quickly generates a physical layout and schematic, and reports worst case speed, area, and power consumption. These functions are layout-independent and resusable.

System Requirements

PC-based systems
• Fully Compatible 486/Pentium-Based Computer
• MS-DOS version or greater
• Windows version
• Minimum 30 MB fixed disk space for base system
• CD-ROM player
• VGA graphics board and monitor
• Windows-Compatible Mouse
• One parallel port
• 32 MB of RAM

Sun-based systems
• Sun Sparc workstation runnung SUN OS or
greater

PC-based Tools
• Graphical monitor color recommended
• Minimum 40 MB fixed disk space for base system
• CD-ROM player
• X-Windows or Open Windows support
• 32 MB of RAM

HP-based Systems For a single user system, the IDS requires an HP 9000 series 700 workstation equipped as follows
• CD-ROM drive local or network
• 100M minimum hard drive 50M hard disk space allo-
cated as swap space
• 32M RAM
• HP_UX or higher
Ordering Code Description ATDS2100PC AT6000 Series Physical Design System ATDS2101PC AT6000 Series Physical Design System with PROcapture Schematic Entry ATDS2110PC AT6000 Series Physical Design System with PROcapture and PROSim Gate Simulation 10K ATDS2110PCI AT6000 Series Design System & Viewlogic restricted license 10K upgrade ATDS2120PC AT6000 Physical Design System with PROcapture and ProSim 20K ATDS2120PCI AT6000 Series Design System & Viewlogic restricted license 20K upgrade ATDS2130PC Viewlogic PROsynthesis, PROsim-VDHL Libraries & Interface for AT6000 Series Design System ATDS2140PC Exemplar Libraries & Interface for AT6000 Series Design System ATDS2180PC Integraph Libraries & Interface for AT6000 Series Design System Maintenance Agreements ATDM2100PC Maintenance for AT6000 Series Physical Design System ATDM2101PC Maintenance for AT6000 Series Physical Design System with PROcapture ATDM2110PC Maintenance for AT6000 Series Physical Design System with PROcapture and PROSim 10K
4-27
Ordering Code Description

ATDM2110PCI Maintenance for AT6000 Series Design System & Viewlogic restricted license 10K upgrade

ATDM2120PC Maintenance for AT6000 Physical Design System with PROcapture and ProSim 20K

ATDM2120PCI Maintenance for AT6000 Series Design System & Viewlogic restricted license 20K upgrade

ATDM2130PC

Maintenance for Viewlogic PROsynthesis, PROsim-VDHL Libraries & Interface for AT6000 Series Design System

ATDM2140PC Maintenance for Exemplar Library & Interface for AT6000 Series Design System

ATDM2180PC Maintenance for Integraph Library & Interace for AT6000 Series Design System

University PC-based Tools does not include Prototyping Kit

ATDS2100PCU University AT6000 Series Physical Design System

ATDS2110PCU University AT6000 Series Physical Design System with PROcapture and ProSim 10K

PC Design Hardware

ATDH2000

AT6000 Series FPGAs Demonstration Board

ATDH2080

AT6000 Series FPGAs Prototyping Kit

ATDH2200

AT17CXX Series Configurator Programming Kit

Sun-based Tools
Ordering Code Description

ATDS2100SN AT6000 Series Physical Design System

ATDS2120SN AT6000 Physical Design System with Powerview Schematic Entry and Viewlogic Simulator 20K

ATDS2130SN Viewlogic Viewsynthesis, ViewSim-VDHL Libraries & Interface for AT6000 Series Design System

ATDS2140SN Exemplar Libraries & Interface for AT6000 Series Design System

ATDS2150SN Mentor Libraries & Interface for AT6000 Series Design System

ATDS2160SN Synopsys Libraries & Interface for AT6000 Series Design System

ATDS2170SN Cadence Verilog/Concept Libraries & Interface for AT6000 Series Design System

ATDS2180SN Integraph Libraries & Interface for AT6000 Series Design System

Maintenance Agreements

ATDM2100SN Maintenance for AT6000 Series Physical Design System

ATDM2120SN

AT6000 Physical Design System with Powerview Schematic Entry and Viewlogic Simulator Maintenance for 20K

ATDM2130SN

Maintenance for Viewlogic Viewsynthesis, ViewSim-VDHL Libraries & Interface for AT6000 Series Design System

ATDM2140SN Maintenance for Exemplar Libraries & Interface for AT6000 Series Design System

ATDM2150SN Maintenance for Mentor Libraries & Interface for AT6000 Series Design System

ATDM2160SN Maintenance for Synopsys Libraries & Interface for AT6000 Series Design System
4-28 FPGA Overview

FPGA Overview
Ordering Code Description

ATDM2170SN

Maintenance for Cadence Verilog/Concept Libraries & Interface for AT6000 Series Design System

ATDM2180SN Maintenance for Integraph Libraries & Interface for AT6000 Series Design

University Sun-based Tools

ATDS2100SNU University AT6000 Series Physical Design System

ATDS2120SNU

University AT6000 Series Physical Design System with Powerview Schematic Entry and Viewlogic Simulator 20K

HP-based Tools
Ordering Code Description

ATDS2100SN AT6000 Series Physical Design System

ATDS2120SN AT6000 Physical Design System with Powerview Schematic Entry and Viewlogic Simulator 20K

ATDS2130SN Viewlogic Viewsynthesis, ViewSim-VDHL Libraries & Interface for AT6000 Series Design System

ATDS2140SN Exemplar Libraries & Interface for AT6000 Series Design System

ATDS2150SN Mentor Libraries & Interface for AT6000 Series Design System

ATDS2160SN Synopsys Libraries & Interface for AT6000 Series Design System

ATDS2170SN Cadence Verilog/Concept Libraries & Interface for AT6000 Series Design System

ATDS2180SN Integraph/Veribest Libraries & Interface for AT6000 Series Design System

Maintenance Agreements

ATDM2100HP Maintenance for AT6000 Series Physical Design System

ATDM2120HP

AT6000 Physical Design System with Powerview Schematic Entry and Viewlogic Simulator Maintenance for 20K

ATDM2130HP

Maintenance for Viewlogic Viewsynthesis, ViewSim-VDHL Libraries & Interface for AT6000 Series Design System

ATDM2140HP Maintenance for Exemplar Libraries & Interface for AT6000 Series Design System

ATDM2150HP Maintenance for Mentor Libraries & Interface for AT6000 Series Design System

ATDM2160HP Maintenance for Synopsys Libraries & Interface for AT6000 Series Design System

ATDM2170HP

Maintenance for Cadence Verilog/Concept Libraries & Interface for AT6000 Series Design System

ATDM2180HP Maintenance for Integraph Libraries & Interface for AT6000 Series Design

University HP-based Tools

ATDS2100HPU University AT6000 Series Physical Design System

ATDS2120HPU

University AT6000 Series Physical Design System with Powerview Schematic Entry and Viewlogic Simulator 20K
4-29
More datasheets: 4214NGML | 4214NGM | 17531 | ACMD-7606-TR1 | ACMD-7606-SG1 | ACMD-7606-BLK | 76000974 | ATDM2160HP | ATDS2120PCI | ATDM2100PC


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ATDM2100SN Datasheet file may be downloaded here without warranties.

Datasheet ID: ATDM2100SN 518716