RD4-2600
RD4-2600 Datasheet
RD4-2600 HDMI1.4 to dual-mode TX DP++ converter
| Part | Datasheet |
|---|---|
RD4-2600 |
RD4-2600 (pdf) |
| PDF Datasheet Preview |
|---|
| RD4-2600 HDMI1.4 to dual-mode TX DP++ converter Reference board user guide MegaChips’ Proprietary and Confidential This information shall not be shared or distributed outside the company and will be exchanged based on the signed proprietary information exchange agreement. MegaChips reserves the right to make any change herein at any time without prior notice. MegaChips does not assume any responsibility or liability arising out of application or use of any product or service described herein except as explicitly agreed upon. MegaChips’ Proprietary Information Strictly Confidential Page 1 of 13 Contents RD4-2600 Purpose and scope 4 5 Set up instructions 5 6 In-System Programming ISP 7 Board description 7 B0643-GUD-01 MegaChips’ Proprietary Information Strictly Confidential Page 2 of 13 RD4-2600 List of tables List of figures Figure Connection set up 6 Connection 7 Board 8 B0643-GUD-01 MegaChips’ Proprietary Information Strictly Confidential Page 3 of 13 RD4-2600 Purpose and scope This user guide provides set up instructions and the description of the STDP2600 reference board RD4-2600 P/N 400-627 targeted for HDMI to DP++ DisplayPort TX or HDMI/DVI output conversion applications. B0643-GUD-01 MegaChips’ Proprietary Information Strictly Confidential Page 4 of 13 RD4-2600 The STDP2600 is MegaChips’ latest generation of HDMI converter series product that features an HDMI1.4 compliant receiver and DisplayPort dual mode transmitter technology that supports both DisplayPort and TMDS signal formats. The HDMI receiver supports a link rate up to 3.0GHz, 3D video formats and 16-bit deep color. The DisplayPort transmitter supports HBR2 speed, a data rate of Gbps per lane with a total bandwidth of Gbps link rate. In addition, the DisplayPort transmitter is capable of supporting HDMI or single link DVI output through a passive level translator dongle . When configured as HDMI output, this device supports link rate up to Gbps that corresponds to a pixel rate of 297 MHz, adequate for supporting video resolution up to FHD 120 Hz with all 3D formats. The STDP2600 RD4 board is intended for the product evaluation and testing. The board contains a standard HDMI input connector, a standard DP++ output connector and a micro USB connector for powering. It also includes an SPI flash for storing the firmware, a UART connector for debugging and In-system programming purpose Firmware download and an I2C slave interface to configure the device from an external host controller optional . Set up instructions The picture below is a typical connection diagram showing a Notebook with HDMI output driving a TV/monitor using STDP2600 RD board. Connect HDMI output from the notebook to HDMI input of STDP2600 RD board using standard HDMI cable. Connect the DP output of STDP2600 RD board to either DP input of LCD monitor or HDMI input of the TV/LCD monitor through a passive dongle. Power up the RD board by plugging in the microUSB cable supplied with board from an external USB source Ex one of the USB ports from the Notebook . Use a DP monitor/ HDMI TV that has audio output for testing the audio conversion through the STDP2600 RD board as well. Once the connection is established and the board is powered, an image should appear on the screen within 2-3 seconds. B0643-GUD-01 MegaChips’ Proprietary Information Strictly Confidential Page 5 of 13 Figure Connection set up |
| More datasheets: PA-1101-18S3 | FTL-1621-61 | FTL-1621-47 | FTL-1621-49 | FTL-1621-51 | FTL-1621-53 | FTL-1621-55 | FTL-1621-57 | FTL-1621-59 | DCMV-8H8P-N-K127 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived RD4-2600 Datasheet file may be downloaded here without warranties.