VSC7155VU-02

VSC7155VU-02 Datasheet

VSC7155

Part	Datasheet
VSC7155VU-02	VSC7155VU-02 (pdf)

Related Parts	Information
VSC7155XVU-02	VSC7155XVU-02

PDF Datasheet Preview
VSC7155 18-PHY 1.5Gbps and 3.0Gbps SAS Edge/Fanout Expander with Table Routing and SSP Engine Low-Cost Single-Chip SAS Edge/Fanout Expander This product is Not Recommended for New Designs. Some versions may be No Longer Available or being discontinued and subject to Last Time Buy, after which new orders can not be placed. Description The VSC7155 is a multimode, user-configurable 18-PHY Serial Attached SCSI SAS expander. The device provides SAS port expansion as defined by the ANSI T10 Serial Attached SCSI and specifications for both edge and fanout expanders. The VSC7155 is targeted at embedded applications in the midrange and enterprise storage environments including blade servers, JBODs, and RAID systems. It offers an attractive technology upgrade for those systems that currently employ parallel SCSI technology and have substantial reliance on SCSIcentric applications software or management solutions. The VSC7155 provides active port expansion for up to 18 connected PHYs with connections made via a high-performance internal nonblocking cross-bar matrix. Programmable output preemphasis and input signal equalization ensure consistent high signal quality in lengthy in-and-out-of-box backplanes or cable infrastructures. The on-board CPU in the VSC7155 performs the role of an SMP management application client and can participate in enclosure management functions through serial interfaces, an embedded Ethernet controller, or vendor-specific SMP implementations. The VSC7155 is a SAS expander containing all the functions needed to implement a 1.5Gbps or 3.0Gbps SAS enterprise server or JBOD system. This device is typically used in distributing SAS signals to an array of disk drives either in a server or an external enclosure. Commonly, two or more “initiator” ports connect to the SAS SCSI SAN and several disk ports connect to drives over a 3Gbps serial backplane. The embedded enclosure management controller, software/firmware-compatible with other Maxim enclosure management controllers, configures and monitors both the VSC7155 and the entire enclosure through flexible low-speed interfaces. The SAS expander device consists of 18 10-bit serializer/deserializers SerDes , per-PHY diagnostics facilities, retiming elasticity buffers, a target/initiator-capable SMP virtual PHY engine, a target/initiator-capable STP virtual PHY engine, multiple serial interfaces, a v3000 CPU, two UARTs, and a variety of general-purpose I/O GPIO including SGPIO. Each receiver’s incoming data is monitored and checked for 8b/10b violations, data path parity errors, disparity errors, CRC errors, and many other common error conditions. The VSC7155 is a highly integrated solution that provides high-performance characteristics, expander/enclosure management, as well as industry leading high-speed inputs/outputs that can drive 3.0Gbps signals across existing backplanes. Customers already using Maxim enclosure management controllers are able to reuse their software from previous products for reduced time-to-market and development effort. Key Features • 18 SAS Expander PHYs with Integrated SerDes • Each PHY Can Operate Independently at 1.5Gbps or 3.0Gbps • Configurable as a SAS Fanout or Edge Expander • Nonblocking Switch Architecture Any PHY to Any PHY Connectivity • Table Routing Up to 320 Destination Addresses • SMP and SSP Virtual PHY with Initiator and Target Capability • Embedded Enclosure Management Processor Stanford-1, 32-Bit RISC for Local Control and SES Functions • Four Operating Modes Parallel Master, Parallel Slave, Serial Interface Slave, and SPI Master • Automatic PHY Speed Detection and Negotiation • Serial ATA Drive Support Using Internal STP/SATA Bridging Functions 1 per PHY • Programmable Output Deemphasis and Input Signal Equalization Levels • Variable Wide-Port Support Applications/Uses • Blade Servers • Disk-Based Backup Storage • Enterprise Storage Environments • Fabric Attached Storage FAS Systems • Fixed-Content Storage Systems • JBOD Arrays • Modular Direct-Attached Storage DAS • Near-Line Storage Replacement Systems • Network Attached Storage NAS Systems • Rack-Mounted Servers with RAID • Storage Area Network SAN Appliances VSC7155XVU-02 Status Last Time Buy Carrier Type Tray Package BGA 448Pin 529mm2 VSC7155VU-02 Status Last Time Buy Carrier Type Tray Package BGA 448Pin 529mm2 2016 Maxim Integrated

PDF Datasheet Preview

VSC7155
18-PHY 1.5Gbps and 3.0Gbps SAS Edge/Fanout Expander with Table Routing and SSP Engine

Low-Cost Single-Chip SAS Edge/Fanout Expander

This product is Not Recommended for New Designs. Some versions may be No Longer Available or being discontinued and subject to Last Time Buy, after which new orders can not be placed.

Description The VSC7155 is a multimode, user-configurable 18-PHY Serial Attached SCSI SAS expander. The device provides SAS port expansion as defined by the ANSI T10 Serial Attached SCSI and specifications for both edge and fanout expanders. The VSC7155 is targeted at embedded applications in the midrange and enterprise storage environments including blade servers, JBODs, and RAID systems. It offers an attractive technology upgrade for those systems that currently employ parallel SCSI technology and have substantial reliance on SCSIcentric applications software or management solutions.

The VSC7155 provides active port expansion for up to 18 connected PHYs with connections made via a high-performance internal nonblocking cross-bar matrix.

Programmable output preemphasis and input signal equalization ensure consistent high signal quality in lengthy in-and-out-of-box backplanes or cable infrastructures.

The on-board CPU in the VSC7155 performs the role of an SMP management application client and can participate in enclosure management functions through serial interfaces, an embedded Ethernet controller, or vendor-specific SMP implementations.

The VSC7155 is a SAS expander containing all the functions needed to implement a 1.5Gbps or 3.0Gbps SAS enterprise server or JBOD system. This device is typically used in distributing SAS signals to an array of disk drives either in a server or an external enclosure. Commonly, two or more “initiator” ports connect to the SAS SCSI SAN and several disk ports connect to drives over a 3Gbps serial backplane. The embedded enclosure management controller, software/firmware-compatible with other Maxim enclosure management controllers, configures and monitors both the VSC7155 and the entire enclosure through flexible low-speed interfaces.

The SAS expander device consists of 18 10-bit serializer/deserializers SerDes , per-PHY diagnostics facilities, retiming elasticity buffers, a target/initiator-capable SMP virtual PHY engine, a target/initiator-capable STP virtual PHY engine, multiple serial interfaces, a v3000 CPU, two UARTs, and a variety of general-purpose I/O GPIO including SGPIO. Each receiver’s incoming data is monitored and checked for 8b/10b violations, data path parity errors, disparity errors, CRC errors, and many other common error conditions.

The VSC7155 is a highly integrated solution that provides high-performance characteristics, expander/enclosure management, as well as industry leading high-speed inputs/outputs that can drive 3.0Gbps signals across existing backplanes.

Customers already using Maxim enclosure management controllers are able to reuse their software from previous products for reduced time-to-market and development effort.

Key Features
• 18 SAS Expander PHYs with Integrated SerDes
• Each PHY Can Operate Independently at 1.5Gbps or 3.0Gbps
• Configurable as a SAS Fanout or Edge Expander
• Nonblocking Switch Architecture Any PHY to Any PHY Connectivity
• Table Routing Up to 320 Destination Addresses
• SMP and SSP Virtual PHY with Initiator and Target Capability
• Embedded Enclosure Management Processor Stanford-1, 32-Bit RISC for Local

Control and SES Functions
• Four Operating Modes Parallel Master, Parallel Slave, Serial Interface Slave, and

SPI Master
• Automatic PHY Speed Detection and Negotiation
• Serial ATA Drive Support Using Internal STP/SATA Bridging Functions 1 per PHY
• Programmable Output Deemphasis and Input Signal Equalization Levels
• Variable Wide-Port Support

Applications/Uses
• Blade Servers
• Disk-Based Backup Storage
• Enterprise Storage Environments
• Fabric Attached Storage FAS Systems
• Fixed-Content Storage Systems
• JBOD Arrays
• Modular Direct-Attached Storage DAS
• Near-Line Storage Replacement Systems
• Network Attached Storage NAS Systems
• Rack-Mounted Servers with RAID
• Storage Area Network SAN Appliances

VSC7155XVU-02

Status

Last Time Buy

Carrier Type

Tray

Package

BGA 448Pin 529mm2

VSC7155VU-02

Status

Last Time Buy

Carrier Type

Tray

Package

BGA 448Pin 529mm2
2016 Maxim Integrated

More datasheets: M85049/10-23N | M85049/10-49W | M85049/10-11N | M85049/10-25W | M85049/10-21W | M85049/10-17N | M85049/10-15N | M85049/10-152W | M85049/10-13N | M85049/10-136N

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived VSC7155VU-02 Datasheet file may be downloaded here without warranties.

Datasheet ID: VSC7155VU-02 647493