MX7534J/D

MX7534J/D Datasheet

MX7534/MX7535

Part	Datasheet
MX7534J/D	MX7534J/D (pdf)

PDF Datasheet Preview
MX7534/MX7535 Microprocessor-Compatible, 14-Bit DACs The MX7534/MX7535 are high-performance, CMOS, monolithic, 14-bit digital-to-analog converters DACs . Wafer-level, laser-trimmed, thin-film resistors and temperature-compensated NMOS switches assure operation over the full operating temperature range with exceptional linear and gain stability. The MX7534 accepts right-justified data in two bytes from an 8-bit bus, while the MX7535 operates with a 14-bit data bus with separate MS-byte and LS-byte select controls. In addition, all digital inputs are compatible with both TTL and 5V CMOS-logic levels. The MX7534/MX7535 are intended for unipolar operation, but may be operated as bipolar DACs with additional external components. Both devices are protected against CMOS latchup, and neither requires the use of external Schottky protection diodes. The MX7534 is available in 20-pin narrow DIP, wide SO, or PLCC packages. The MX7535 is available in 28-pin, 600 mil wide DIP, wide SO, or PLCC packages. Machine and Motion Control Systems Automatic Test Equipment Digital Audio µP-Controlled Calibration Circuitry Programmable-Gain Amplifiers Digitally Controlled Filters Programmable Power Supplies Configurations o 14-Bit Monotonic Over Full Temperature Range o Full 4-Quadrant Multiplication o µP-Compatible, Double-Buffered Inputs o Exceptionally Low Gain Tempco 2.5ppm/°C o Low Output Leakage <20nA Over Temp. o Low Power Consumption o TTL and CMOS Compatible Ordering Information PART TEMP. RANGE PIN-PACKAGE INL LSBs MX7534KN 0°C to +70°C 20 Plastic DIP MX7534JN 0°C to +70°C 20 Plastic DIP MX7534KCWP 0°C to +70°C 20 SO MX7534JCWP 0°C to +70°C 20 SO MX7534KP 0°C to +70°C 20 PLCC MX7534JP 0°C to +70°C 20 PLCC MX7534J/D 0°C to +70°C Dice* MX7534BQ -25°C to +85°C 20 CERDIP MX7534AQ -25°C to +85°C 20 CERDIP MX7534BD -25°C to +85°C 20 Ceramic SB MX7534AD -25°C to +85°C 20 Ceramic SB MX7534KEWP -40°C to +85°C 20 SO MX7534JEWP -40°C to +85°C 20 SO MX7534TQ -55°C to +125°C 20 CERDIP MX7534SQ -55°C to +125°C 20 CERDIP MX7534TD -55°C to +125°C 20 Ceramic SB MX7534SD -55°C to +125°C 20 Ceramic SB Ordering Information continued at end of data sheet. Dice are tested at +25°C, DC parameters only. Diagrams TOP VIEW REF 1 RFB 2 IOUT 3 AGNDS 4 AGNDF 5 DGND 6 D7 7 D6 8 D5 9 D4 10 MX7534 20 VSS 19 VDD 18 CS 17 WR 16 A0 15 A1 14 D0 13 D1 12 D2 11 D3 DIP/SO/PLCC/Ceramic SB MX7535 at end of data sheet. VDD 19 REF 1 14-BIT DAC 14 DAC REGISTER MS INPUT REGISTER LS INPUT REGISTER CONTROL LOGIC MX7534 RFB IOUT 4 AGNDS 5 AGNOF 15 A1 16 A0 18 CS 17 WR 6 DGND Functional diagrams continued at end of data sheet. 20 VSS Maxim Integrated Products 1 For free samples & the latest literature or phone 1-800-998-8800 MX7534/MX7535 Microprocessor-Compatible, 14-Bit DACs ABSOLUTE MAXIMUM RATINGS VDD to DGND +17V VSS to AGND +0.3V REF to AGND MX7534 REFS to AGND MX7535 REFF to AGND MX7535 RFB to Digital Input Voltage to DGND.........................-0.3V, VDD + 0.3V IOUT to DGND VDD + 0.3V AGND to DGND VDD + 0.3V Continuous Power Dissipation TA = +70°C 20-Pin Plastic DIP derate 11.11mW/°C above +70°C ....889mW 28-Pin Plastic DIP derate 14.29mW/°C above +70°C ......1.14W 20-Pin SO derate 10.00mW/°C above +70°C ..............800mW 28-Pin SO derate 12.50mW/°C above +70°C .....................1W 20-Pin PLCC derate 10.00mW/°C above +70°C .........800mW 28-Pin PLCC derate 10.53mW/°C above +70°C .........842mW 20-Pin CERDIP derate 11.11mW/°C above +70°C ......889mW 28-Pin CERDIP derate 16.67mW/°C above +70°C ........1.33W 20-Pin Ceramic SB derate 11.76mW/°C above +70°C .............................941mW 28-Pin Ceramic SB derate 20.00mW/°C above +70°C ................................1.6W Operating Temperature Ranges MX753_J/K to +70°C MX753_A/B to +85°C to +85°C to +125°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature soldering, 10sec .............................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS VDD = +11.4V to +15.75V Note 1 , VREF = 10V, VIOUT = VAGNDS = VSS = 0V, TA = TMIN to TMAX, unless otherwise noted. PARAMETER DC ACCURACY Resolution Relative Accuracy Differential Nonlinearity Full-Scale Error Gain Temperature Coefficient Note 2 Output Leakage Current REFERENCE INPUT Reference Voltage Input Resistance Note 3 DIGITAL INPUTS Input High Voltage Input Low Voltage Input Leakage Current Input Capacitance Note 2 CONDITIONS _Ordering Information continued PART MX7535KN MX7535JN MX7535KCWI MX7535JCWI MX7535KP MX7535JP MX7535J/D MX7535BQ MX7535AQ MX7535BD MX7535AD MX7535KEWI MX7535JEWI MX7535TQ MX7535SQ MX7535TD MX7535SD TEMP. RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C -25°C to +85°C -25°C to +85°C -25°C to +85°C -25°C to +85°C -40°C to +85°C -40°C to +85°C -55°C to +125°C -55°C to +125°C -55°C to +125°C -55°C to +125°C PIN PACKAGE INL LSBs 28 Plastic DIP 28 Plastic DIP 28 Wide SO 28 Wide SO 28 PLCC 28 PLCC Dice 28 CERDIP 28 CERDIP 28 Ceramic SB 28 Ceramic SB 28 Wide SO 28 Wide SO 28 CERDIP 28 CERDIP 28 Ceramic SB 28 Ceramic SB *Dice are tested at +25°C, DC parameters only. Configurations continued TOP VIEW REFS 1 REFF 2 RFB 3 IOUT 4 AGNDS 5 AGNDF 6 DGND 7 MSB D13 8 D12 9 D11 10 D10 11 D9 12 D8 13 D7 14 MX7535 28 N.C. 27 VSS 26 VDD 25 WR 24 CSLSB 23 LDAC 22 CSMSB 21 D0 LSB 20 D1 19 D2 18 D3 17 D4 16 D5 15 D6 DIP/SO/PLCC/Ceramic SB Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 16 Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408 737-7600 1996 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.

PDF Datasheet Preview

MX7534/MX7535

Microprocessor-Compatible, 14-Bit DACs

The MX7534/MX7535 are high-performance, CMOS, monolithic, 14-bit digital-to-analog converters DACs . Wafer-level, laser-trimmed, thin-film resistors and temperature-compensated NMOS switches assure operation over the full operating temperature range with exceptional linear and gain stability.

The MX7534 accepts right-justified data in two bytes from an 8-bit bus, while the MX7535 operates with a 14-bit data bus with separate MS-byte and LS-byte select controls. In addition, all digital inputs are compatible with both TTL and 5V CMOS-logic levels. The MX7534/MX7535 are intended for unipolar operation, but may be operated as bipolar DACs with additional external components. Both devices are protected against CMOS latchup, and neither requires the use of external Schottky protection diodes.

The MX7534 is available in 20-pin narrow DIP, wide SO, or PLCC packages. The MX7535 is available in 28-pin, 600 mil wide DIP, wide SO, or PLCC packages.

Machine and Motion Control Systems Automatic Test Equipment Digital Audio µP-Controlled Calibration Circuitry Programmable-Gain Amplifiers Digitally Controlled Filters Programmable Power Supplies

Configurations
o 14-Bit Monotonic Over Full Temperature Range o Full 4-Quadrant Multiplication o µP-Compatible, Double-Buffered Inputs o Exceptionally Low Gain Tempco 2.5ppm/°C o Low Output Leakage <20nA Over Temp. o Low Power Consumption o TTL and CMOS Compatible
Ordering Information

PART

TEMP. RANGE PIN-PACKAGE INL LSBs

MX7534KN
0°C to +70°C 20 Plastic DIP

MX7534JN
0°C to +70°C 20 Plastic DIP

MX7534KCWP 0°C to +70°C 20 SO

MX7534JCWP 0°C to +70°C 20 SO

MX7534KP
0°C to +70°C 20 PLCC

MX7534JP
0°C to +70°C 20 PLCC

MX7534J/D
0°C to +70°C Dice*

MX7534BQ -25°C to +85°C 20 CERDIP

MX7534AQ -25°C to +85°C 20 CERDIP

MX7534BD -25°C to +85°C 20 Ceramic SB

MX7534AD -25°C to +85°C 20 Ceramic SB

MX7534KEWP -40°C to +85°C 20 SO

MX7534JEWP -40°C to +85°C 20 SO

MX7534TQ -55°C to +125°C 20 CERDIP

MX7534SQ -55°C to +125°C 20 CERDIP

MX7534TD -55°C to +125°C 20 Ceramic SB

MX7534SD -55°C to +125°C 20 Ceramic SB
Ordering Information continued at end of data sheet. *Dice are tested at +25°C, DC parameters only.

Diagrams

TOP VIEW

REF 1 RFB 2 IOUT 3 AGNDS 4 AGNDF 5 DGND 6 D7 7 D6 8 D5 9 D4 10

MX7534
20 VSS 19 VDD 18 CS 17 WR 16 A0 15 A1 14 D0 13 D1 12 D2 11 D3

DIP/SO/PLCC/Ceramic SB MX7535 at end of data sheet.

VDD 19

REF 1
14-BIT DAC
14 DAC REGISTER

MS INPUT REGISTER

LS INPUT REGISTER

CONTROL LOGIC

MX7534

RFB IOUT
4 AGNDS 5 AGNOF
15 A1 16 A0 18 CS 17 WR
6 DGND

Functional diagrams continued at end of data sheet.
20 VSS

Maxim Integrated Products 1

For free samples & the latest literature or phone 1-800-998-8800

MX7534/MX7535

Microprocessor-Compatible, 14-Bit DACs

ABSOLUTE MAXIMUM RATINGS

VDD to DGND +17V VSS to AGND +0.3V REF to AGND MX7534 REFS to AGND MX7535 REFF to AGND MX7535 RFB to Digital Input Voltage to DGND.........................-0.3V, VDD + 0.3V IOUT to DGND VDD + 0.3V AGND to DGND VDD + 0.3V Continuous Power Dissipation TA = +70°C
20-Pin Plastic DIP derate 11.11mW/°C above +70°C ....889mW 28-Pin Plastic DIP derate 14.29mW/°C above +70°C ......1.14W 20-Pin SO derate 10.00mW/°C above +70°C ..............800mW 28-Pin SO derate 12.50mW/°C above +70°C .....................1W 20-Pin PLCC derate 10.00mW/°C above +70°C .........800mW
28-Pin PLCC derate 10.53mW/°C above +70°C .........842mW 20-Pin CERDIP derate 11.11mW/°C above +70°C ......889mW 28-Pin CERDIP derate 16.67mW/°C above +70°C ........1.33W 20-Pin Ceramic SB
derate 11.76mW/°C above +70°C .............................941mW 28-Pin Ceramic SB
derate 20.00mW/°C above +70°C ................................1.6W Operating Temperature Ranges

MX753_J/K to +70°C MX753_A/B to +85°C to +85°C to +125°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature soldering, 10sec .............................+300°C

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS

VDD = +11.4V to +15.75V Note 1 , VREF = 10V, VIOUT = VAGNDS = VSS = 0V, TA = TMIN to TMAX, unless otherwise noted.

PARAMETER DC ACCURACY Resolution Relative Accuracy Differential Nonlinearity

Full-Scale Error

Gain Temperature Coefficient Note 2

Output Leakage Current

REFERENCE INPUT Reference Voltage Input Resistance Note 3 DIGITAL INPUTS Input High Voltage Input Low Voltage Input Leakage Current Input Capacitance Note 2

CONDITIONS
_Ordering Information continued

PART MX7535KN MX7535JN MX7535KCWI MX7535JCWI MX7535KP MX7535JP MX7535J/D MX7535BQ MX7535AQ MX7535BD MX7535AD MX7535KEWI MX7535JEWI MX7535TQ MX7535SQ MX7535TD MX7535SD

TEMP. RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C
-25°C to +85°C -25°C to +85°C -25°C to +85°C -25°C to +85°C -40°C to +85°C -40°C to +85°C -55°C to +125°C -55°C to +125°C -55°C to +125°C -55°C to +125°C

PIN PACKAGE INL LSBs
28 Plastic DIP
28 Plastic DIP
28 Wide SO
28 Wide SO
28 PLCC
28 PLCC

Dice*
28 CERDIP
28 CERDIP
28 Ceramic SB
28 Ceramic SB
28 Wide SO
28 Wide SO
28 CERDIP
28 CERDIP
28 Ceramic SB
28 Ceramic SB
*Dice are tested at +25°C, DC parameters only.

Configurations continued

TOP VIEW

REFS 1 REFF 2 RFB 3 IOUT 4 AGNDS 5 AGNDF 6 DGND 7 MSB D13 8 D12 9 D11 10 D10 11

D9 12 D8 13 D7 14

MX7535
28 N.C. 27 VSS 26 VDD 25 WR 24 CSLSB 23 LDAC 22 CSMSB 21 D0 LSB 20 D1 19 D2 18 D3 17 D4 16 D5 15 D6

DIP/SO/PLCC/Ceramic SB

Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
16 Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408 737-7600
1996 Maxim Integrated Products

Printed USA
is a registered trademark of Maxim Integrated Products.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MX7534J/D Datasheet file may be downloaded here without warranties.

Datasheet ID: MX7534J/D 647484