MAX9502MEXK+

MAX9502MEXK+ Datasheet

MAX9502

Part	Datasheet
MAX9502MEXK+	MAX9502MEXK+ (pdf)

PDF Datasheet Preview
MAX9502 EVALUATION KIT AVAILABLE 2.5V Video Amplifier with Reconstruction Filter The MAX9502 small, low-power video amplifier with integrated reconstruction filter operates from a supply voltage as low as 2.5V. The small size and the low minimum supply voltage make the MAX9502 ideal for portable applications or small, low-power applications. The MAX9502 DC-couples the input and the output, resulting in a very small solution. The MAX9502 input can be directly connected to the output of a video digitaltoanalog converter DAC . The reconstruction filter is implemented as a 4th-order Chebyshev with a minimum passband of 5.5MHz, 3dB attenuation at 8MHz, and 55dB attenuation at 27MHz. The output amplifier provides a closed-loop gain of +6dB MAX9502G or +12dB MAX9502M , and can drive a 2VP-P video signal into a 150Ω load to ground. The output signal is level-shifted so the sync tip is 110mV typ above ground. The MAX9502 operates from a 2.5V to 3.6V single supply and consumes only 5.3mA quiescent supply current. An active-low shutdown mode reduces the supply current to 0.01uA. The MAX9502 is available in tiny 6-pin uDFN 1mm x 1.5mm x 0.8mm and 5-pin SC70 packages. The device is specified over the -40°C to +85°C extended and -40°C to +125°C automotive temperature ranges. ●● Mobile Phones ●● Digital Still Cameras ●● Portable Video ●● Security/CCTV Pin Configurations appear at end of data sheet. Ordering Information PART PIN-PACKAGE MAX9502GAALT+T 6 µDFN-6 MAX9502GAAXK+T 5 SC70-5 MAX9502GELT+T 6 µDFN-6 MAX9502GEXK+T 5 SC70-5 Ordering Information continued at end of data sheet. +Denotes lead-free package. ●● Tiny 6-Pin uDFN 1mm x 1.5mm x 0.8mm and 5-Pin SC70 Packages ●● DC-Coupled Input and Output Save Board Space ●● 4-Pole Chebyshev Filter ●● 5.5MHz Passband ●● 55dB Attenuation at 27MHz ●● 0.01uA Low-Current Shutdown Mode ●● 2.5V to 3.6V Single-Supply Operation ●● Video Amplifier with Fixed Gains of +6dB MAX9502G or +12dB MAX9502M Typical Operating Circuit 0.1µF ON SHDN OFF VIDEO ASIC VIDEO IN DAC MAX9502 SHUTDOWN CIRCUIT LOWPASS FILTER GAIN = +6dB MAX9502G GAIN = +12dB MAX9502M VIDEO AMP TELEVISION Other Portable Video Amplifiers PRODUCT MAX9503 MAX9505 MAX4090 MAX9504 FEATURES DirectDrive , LPF, TQFN DirectDrive, LPF, analog switch, TQFN Input clamp, µDFN, SOT23, SC70 Optional DC offset bias, µDFN, SOT23 TEMP RANGE -40°C to +125°C -40°C to +125°C -40°C to +85°C -40°C to +85°C GAIN +6 +6 +6 +6 TOP MARK LI ASO AU ARV MAX9502 2.5V Video Amplifier with Reconstruction Filter Absolute Maximum Ratings VCC to +4V SHDN, IN, OUT to GND..............................-0.3V to VCC + 0.3V OUT Short-Circuit Duration to VCC, Continuous Power Dissipation TA = +70°C 5-Pin SC70 derate 3.1mW/°C above +70°C .. .247mW 6-Pin uDFN derate 2.1mW/°C above +70°C .. Operating Temperature Ranges to +85°C to +125°C Junction Storage Temperature Range .............................-65°C to +150°C Lead Temperature soldering, 10s .................................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. DC Electrical Characteristics VCC = SHDN = 3.0V, GND = 0V, no load, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C, unless otherwise noted. Note 1 PARAMETER CONDITIONS Supply Voltage Range Quiescent Supply Current Shutdown Supply Current Input Voltage Range Input Current Input Resistance DC Voltage Gain Note 2 VCC ICC ISHDN IIN RIN AV Guaranteed by PSRR VIN = 0V, 2.5V VCC 3.6V, SHDN = VCC, TA = -40°C to +85°C VIN = 0V, 2.5V VCC 3.6V, SHDN = VCC, TA = -40°C to +125°C VSHDN = 0V Guaranteed by DC Ordering Information continued PART MAX9502MAALT+T MAX9502MAAXK+T MAX9502MELT+T MAX9502MEXK+T +Denotes lead-free package. PIN-PACKAGE 6 µDFN-6 5 SC70-5 6 µDFN-6 5 SC70-5 TEMP RANGE -40°C to +125°C -40°C to +125°C -40°C to +85°C -40°C to +85°C GAIN +12 +12 +12 +12 TOP MARK LJ ASP AV Pin Configurations TOP VIEW OUT N.C. VCC MAX9502 IN GND SHDN µDFN IN 1 GND 2 MAX9502 5 OUT SHDN 3 SC70 4 VCC Chip Information PROCESS BiCMOS Package Information For the latest package outline information and land patterns footprints , go to Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. PACKAGE TYPE 6 µDFN 5 SC70 PACKAGE CODE L611+1 X5+1 OUTLINE NO. 21-0147 21-0076 LAND PATTERN NO. 90-0080 90-0188 Maxim Integrated 9 MAX9502 2.5V Video Amplifier with Reconstruction Filter 5/14 DESCRIPTION Removed automotive reference in Applications section PAGES CHANGED For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values min and max limits shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. 2014 Maxim Integrated Products, Inc. 10

PDF Datasheet Preview

MAX9502

EVALUATION KIT AVAILABLE
2.5V Video Amplifier with Reconstruction Filter

The MAX9502 small, low-power video amplifier with integrated reconstruction filter operates from a supply voltage as low as 2.5V. The small size and the low minimum supply voltage make the MAX9502 ideal for portable applications or small, low-power applications.

The MAX9502 DC-couples the input and the output, resulting in a very small solution. The MAX9502 input can be directly connected to the output of a video digitaltoanalog converter DAC . The reconstruction filter is implemented as a 4th-order Chebyshev with a minimum passband of 5.5MHz, 3dB attenuation at 8MHz, and 55dB attenuation at 27MHz.

The output amplifier provides a closed-loop gain of +6dB MAX9502G or +12dB MAX9502M , and can drive a 2VP-P video signal into a 150Ω load to ground. The output signal is level-shifted so the sync tip is 110mV typ above ground.

The MAX9502 operates from a 2.5V to 3.6V single supply and consumes only 5.3mA quiescent supply current. An active-low shutdown mode reduces the supply current to 0.01uA.

The MAX9502 is available in tiny 6-pin uDFN 1mm x 1.5mm x 0.8mm and 5-pin SC70 packages. The device is specified over the -40°C to +85°C extended and -40°C to +125°C automotive temperature ranges.
●● Mobile Phones ●● Digital Still Cameras ●● Portable Video ●● Security/CCTV

Pin Configurations appear at end of data sheet.
Ordering Information

PART

PIN-PACKAGE

MAX9502GAALT+T
6 µDFN-6

MAX9502GAAXK+T
5 SC70-5

MAX9502GELT+T
6 µDFN-6

MAX9502GEXK+T
5 SC70-5
Ordering Information continued at end of data sheet. +Denotes lead-free package.
●● Tiny 6-Pin uDFN 1mm x 1.5mm x 0.8mm and 5-Pin SC70 Packages
●● DC-Coupled Input and Output Save Board Space ●● 4-Pole Chebyshev Filter ●● 5.5MHz Passband ●● 55dB Attenuation at 27MHz ●● 0.01uA Low-Current Shutdown Mode ●● 2.5V to 3.6V Single-Supply Operation ●● Video Amplifier with Fixed Gains of +6dB

MAX9502G or +12dB MAX9502M

Typical Operating Circuit
0.1µF

ON SHDN OFF

VIDEO ASIC VIDEO IN DAC

MAX9502 SHUTDOWN

CIRCUIT

LOWPASS FILTER

GAIN = +6dB MAX9502G GAIN = +12dB MAX9502M

VIDEO AMP

TELEVISION

Other Portable Video Amplifiers

PRODUCT MAX9503 MAX9505 MAX4090 MAX9504

FEATURES DirectDrive , LPF, TQFN DirectDrive, LPF, analog switch, TQFN Input clamp, µDFN, SOT23, SC70 Optional DC offset bias, µDFN, SOT23

TEMP RANGE -40°C to +125°C -40°C to +125°C -40°C to +85°C -40°C to +85°C

GAIN +6 +6 +6 +6

TOP MARK LI

ASO AU ARV

MAX9502
2.5V Video Amplifier with Reconstruction Filter

Absolute Maximum Ratings

VCC to +4V SHDN, IN, OUT to GND..............................-0.3V to VCC + 0.3V OUT Short-Circuit Duration to VCC, Continuous Power Dissipation TA = +70°C
5-Pin SC70 derate 3.1mW/°C above +70°C .. .247mW 6-Pin uDFN derate 2.1mW/°C above +70°C ..

Operating Temperature Ranges to +85°C to +125°C

Junction Storage Temperature Range .............................-65°C to +150°C Lead Temperature soldering, 10s .................................+300°C

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

DC Electrical Characteristics

VCC = SHDN = 3.0V, GND = 0V, no load, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C, unless otherwise noted. Note 1

PARAMETER

CONDITIONS

Supply Voltage Range Quiescent Supply Current Shutdown Supply Current

Input Voltage Range

Input Current Input Resistance DC Voltage Gain Note 2

VCC ICC ISHDN

IIN RIN AV

Guaranteed by PSRR

VIN = 0V, 2.5V VCC 3.6V, SHDN = VCC, TA = -40°C to +85°C VIN = 0V, 2.5V VCC 3.6V, SHDN = VCC, TA = -40°C to +125°C VSHDN = 0V

Guaranteed by DC
Ordering Information continued

PART MAX9502MAALT+T MAX9502MAAXK+T MAX9502MELT+T MAX9502MEXK+T +Denotes lead-free package.

PIN-PACKAGE 6 µDFN-6 5 SC70-5 6 µDFN-6 5 SC70-5

TEMP RANGE -40°C to +125°C -40°C to +125°C -40°C to +85°C -40°C to +85°C

GAIN +12 +12 +12 +12

TOP MARK LJ ASP AV

Pin Configurations

TOP VIEW

OUT N.C. VCC

MAX9502

IN GND SHDN
µDFN

IN 1 GND 2

MAX9502
5 OUT

SHDN 3

SC70
4 VCC

Chip Information

PROCESS BiCMOS

Package Information

For the latest package outline information and land patterns footprints , go to Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status.

PACKAGE TYPE
6 µDFN 5 SC70

PACKAGE CODE

L611+1 X5+1

OUTLINE NO.
21-0147 21-0076

LAND PATTERN NO.
90-0080 90-0188

Maxim Integrated 9

MAX9502
2.5V Video Amplifier with Reconstruction Filter
5/14

DESCRIPTION Removed automotive reference in Applications section

PAGES CHANGED
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at

Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values min and max limits shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.

Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. 2014 Maxim Integrated Products, Inc. 10

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX9502MEXK+ Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX9502MEXK+ 647425