MAX9210EUM+T

MAX9210EUM+T Datasheet

MAX9210/MAX9214/ MAX9220/MAX9222

Part	Datasheet
MAX9210EUM+T	MAX9210EUM+T (pdf)

PDF Datasheet Preview
MAX9210/MAX9214/ MAX9220/MAX9222 Programmable DC-Balance 21-Bit Deserializers The MAX9210/MAX9214/MAX9220/MAX9222 deserialize three LVDS serial data inputs into 21 single-ended LVCMOS/ LVTTL outputs. A parallel rate LVDS clock received with the LVDS data streams provides timing for deserialization. The outputs have a separate supply, allowing 1.8V to 5V output logic levels. The MAX9210/MAX9214/MAX9220/MAX9222 feature programmable DC balance, which allows isolation between a serializer and deserializer using AC-coupling. Each deserializer decodes data transmitted by one of MAX9209/MAX9213 serializers. The MAX9210/MAX9214 have rising-edge output strobes, and when DC balance is not programmed, are compatible with non-DC-balanced 21-bit deserializers such as the DS90CR216A and DS90CR218A. The MAX9220/ MAX9222 have falling-edge output strobes. Two frequency versions and two DC-balance default conditions are available for maximum replacement flexibility and compatibility with popular non-DC-balanced deserializers. The transition time of the single-ended outputs is increased on the low-frequency version parts MAX9210/MAX9220 for reduced EMI. The LVDS inputs meet IEC 61000-4-2 Level 4 ESD specification, ±15kV for Air Discharge and ±8kV Contact Discharge. The MAX9210/MAX9214/MAX9220/MAX9222 are available in a TSSOP package, and operate over the -40°C to +85°C temperature range. ●● Digital Copiers ●● Laser Printers ●● Programmable DC Balance or Non-DC Balance ●● DC Balance Allows AC-Coupling for Wider Input Common-Mode Voltage Range ●● As Low as 8MHz Operation MAX9210/MAX9220 ●● Falling-Edge Output Strobe MAX9220/MAX9222 ●● Slower Output Transitions for Reduced EMI MAX9210/MAX9220 ●● High-Impedance Outputs when PWRDWN is Low Allow Output Busing ●● Pin Compatible with DS90CR216A/DS90CR218A MAX9210/MAX9214 ●● Fail-Safe Inputs in Non-DC-Balanced Mode ●● 5V Tolerant PWRDWN Input ●● PLL Requires No External Components ●● Up to 1.785Gbps Throughput ●● Separate Output Supply Pins Allow Interface to 1.8V, 2.5V, 3.3V, and 5V Logic ●● LVDS Inputs Meet IEC 61000-4-2 Level and ISO 10605 ESD Requirements ●● LVDS Inputs Conform to ANSI TIA/EIA-644 LVDS Standard ●● Low-Profile 48-Lead TSSOP Package ●● +3.3V Main Power Supply ●● -40°C to +85°C Operating Temperature Range Ordering Information PART MAX9210EUM MAX9214EUM MAX9220EUM MAX9222EUM TEMP RANGE -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C PIN-PACKAGE 48 TSSOP 48 TSSOP 48 TSSOP 48 TSSOP Functional Diagram and Pin Configuration appear at end of data sheet. MAX9210/MAX9214/ MAX9220/MAX9222 Programmable DC-Balance 21-Bit Deserializers Absolute Maximum Ratings VCC to +4.0V VCCO to +6.0V RxIN_, RxCLK IN_ to +4.0V PWRDWN to +6.0V DCB/NC to -0.5V to VCC + 0.5V RxOUT_, RxCLK OUT to GND...............-0.5V to VCCO + 0.5V Continuous Power Dissipation TA = +70°C TSSOP derate 16mW/°C above +70°C ...................1282mW Storage Temperature Range............................. -65°C to +150°C Junction ESD Protection Human Body Model RD = 1.5kΩ, CS = 100pF All Pins to IEC 61000-4-2 RD = 330Ω, CS = 150pF Contact Discharge RxIN_, RxCLK IN_ to GND.............±8kV Air Discharge RxIN_, RxCLK IN_ to GND...................±15kV ISO 10605 RD = 2kΩ, CS = 330pF Contact Discharge RxIN_, RxCLK IN_ to GND.............±8kV Air Discharge RxIN_, RxCLK IN_ to GND...................±25kV Lead Temperature soldering, 10s .................................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. DC Electrical Characteristics VCC = +3.0V to +3.6V, VCCO = +3.0V to +5.5V, PWRDWN = high, DCB/NC = high or low, differential input voltage \|VID\| = 0.05V to 1.2V, input common-mode voltage VCM = \|VID/2\| to 2.4V - \|VID/2\|, TA = -40°C to +85°C, unless otherwise noted. Typical values are at VCC = VCCO = +3.3V, \|VID\| = 0.2V, VCM = 1.25V, TA = +25°C. Notes 1, 2 PARAMETER CONDITIONS SINGLE-ENDED INPUTS PWRDWN, DCB/NC High-Level Input Voltage PWRDWN DCB/NC Low-Level Input Voltage Input Current VIN = high or low, PWRDWN = high or low Input Clamp Voltage ICL = -18mA SINGLE-ENDED OUTPUTS RxOUT_, RxCLK OUT IOH = -100µA High-Level Output Voltage IOH = -2mA MAX9210/ RxCLK OUT MAX9220 RxOUT_ MAX9214/MAX9222 Low-Level Output Voltage IOL = 100µA IOL = 2mA MAX9210/ RxCLK OUT MAX9220 RxOUT_ MAX9214/MAX9222 High-Impedance Output Current PWRDWN = low, VOUT_ = -0.3V to VCCO + 0.3V For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values min and max limits shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. 2014 Maxim Integrated Products, Inc. 17

PDF Datasheet Preview

MAX9210/MAX9214/ MAX9220/MAX9222

Programmable DC-Balance 21-Bit Deserializers

The MAX9210/MAX9214/MAX9220/MAX9222 deserialize three LVDS serial data inputs into 21 single-ended LVCMOS/ LVTTL outputs. A parallel rate LVDS clock received with the LVDS data streams provides timing for deserialization. The outputs have a separate supply, allowing 1.8V to 5V output logic levels.

The MAX9210/MAX9214/MAX9220/MAX9222 feature programmable DC balance, which allows isolation between a serializer and deserializer using AC-coupling. Each deserializer decodes data transmitted by one of MAX9209/MAX9213 serializers.

The MAX9210/MAX9214 have rising-edge output strobes, and when DC balance is not programmed, are compatible with non-DC-balanced 21-bit deserializers such as the DS90CR216A and DS90CR218A. The MAX9220/ MAX9222 have falling-edge output strobes.

Two frequency versions and two DC-balance default conditions are available for maximum replacement flexibility and compatibility with popular non-DC-balanced deserializers. The transition time of the single-ended outputs is increased on the low-frequency version parts MAX9210/MAX9220 for reduced EMI. The LVDS inputs meet IEC 61000-4-2 Level 4 ESD specification, ±15kV for Air Discharge and ±8kV Contact Discharge.

The MAX9210/MAX9214/MAX9220/MAX9222 are available in a TSSOP package, and operate over the -40°C to +85°C temperature range.
●● Digital Copiers ●● Laser Printers
●● Programmable DC Balance or Non-DC Balance
●● DC Balance Allows AC-Coupling for Wider Input Common-Mode Voltage Range
●● As Low as 8MHz Operation MAX9210/MAX9220
●● Falling-Edge Output Strobe MAX9220/MAX9222
●● Slower Output Transitions for Reduced EMI MAX9210/MAX9220
●● High-Impedance Outputs when PWRDWN is Low Allow Output Busing
●● Pin Compatible with DS90CR216A/DS90CR218A MAX9210/MAX9214
●● Fail-Safe Inputs in Non-DC-Balanced Mode
●● 5V Tolerant PWRDWN Input
●● PLL Requires No External Components
●● Up to 1.785Gbps Throughput
●● Separate Output Supply Pins Allow Interface to 1.8V, 2.5V, 3.3V, and 5V Logic
●● LVDS Inputs Meet IEC 61000-4-2 Level and ISO 10605 ESD Requirements
●● LVDS Inputs Conform to ANSI TIA/EIA-644 LVDS Standard
●● Low-Profile 48-Lead TSSOP Package
●● +3.3V Main Power Supply
●● -40°C to +85°C Operating Temperature Range
Ordering Information

PART MAX9210EUM MAX9214EUM MAX9220EUM MAX9222EUM

TEMP RANGE -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C

PIN-PACKAGE 48 TSSOP 48 TSSOP 48 TSSOP 48 TSSOP

Functional Diagram and Pin Configuration appear at end of data sheet.

MAX9210/MAX9214/ MAX9220/MAX9222

Programmable DC-Balance 21-Bit Deserializers

Absolute Maximum Ratings

VCC to +4.0V VCCO to +6.0V RxIN_, RxCLK IN_ to +4.0V PWRDWN to +6.0V DCB/NC to -0.5V to VCC + 0.5V RxOUT_, RxCLK OUT to GND...............-0.5V to VCCO + 0.5V Continuous Power Dissipation TA = +70°C

TSSOP derate 16mW/°C above +70°C ...................1282mW Storage Temperature Range............................. -65°C to +150°C Junction

ESD Protection Human Body Model RD = 1.5kΩ, CS = 100pF All Pins to

IEC 61000-4-2 RD = 330Ω, CS = 150pF Contact Discharge RxIN_, RxCLK IN_ to GND.............±8kV Air Discharge RxIN_, RxCLK IN_ to GND...................±15kV

ISO 10605 RD = 2kΩ, CS = 330pF Contact Discharge RxIN_, RxCLK IN_ to GND.............±8kV Air Discharge RxIN_, RxCLK IN_ to GND...................±25kV

Lead Temperature soldering, 10s .................................+300°C

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

DC Electrical Characteristics

VCC = +3.0V to +3.6V, VCCO = +3.0V to +5.5V, PWRDWN = high, DCB/NC = high or low, differential input voltage |VID| = 0.05V to 1.2V, input common-mode voltage VCM = |VID/2| to 2.4V - |VID/2|, TA = -40°C to +85°C, unless otherwise noted. Typical values are at VCC = VCCO = +3.3V, |VID| = 0.2V, VCM = 1.25V, TA = +25°C. Notes 1, 2

PARAMETER

CONDITIONS

SINGLE-ENDED INPUTS PWRDWN, DCB/NC

High-Level Input Voltage

PWRDWN

DCB/NC

Low-Level Input Voltage

Input Current

VIN = high or low, PWRDWN = high or low

Input Clamp Voltage

ICL = -18mA

SINGLE-ENDED OUTPUTS RxOUT_, RxCLK OUT

IOH = -100µA

High-Level Output Voltage

IOH = -2mA

MAX9210/ RxCLK OUT MAX9220 RxOUT_

MAX9214/MAX9222

Low-Level Output Voltage

IOL = 100µA

IOL = 2mA

MAX9210/ RxCLK OUT MAX9220 RxOUT_

MAX9214/MAX9222

High-Impedance Output Current

PWRDWN = low, VOUT_ = -0.3V to VCCO + 0.3V
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at

Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values min and max limits shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.

Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. 2014 Maxim Integrated Products, Inc. 17

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX9210EUM+T Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX9210EUM+T 647417