MAX4659EUA-T

MAX4659EUA-T Datasheet

MAX4659/MAX4660

Part	Datasheet
MAX4659EUA-T	MAX4659EUA-T (pdf)

Related Parts	Information
MAX4659EUA	MAX4659EUA

PDF Datasheet Preview
MAX4659/MAX4660 High-Current, SPDT, CMOS Analog Switches The MAX4659/MAX4660 are medium voltage CMOS analog switches with a low on-resistance of max specifically designed to handle large switch currents. With a switch capability of up to 200mA peak current and 150mA continuous current MAX4660 , and up to 150mA peak current and 75mA continuous current MAX4659 , these parts can switch loads as low as They can replace reed relays with a million times the speed and a virtually unlimited number of lifetime cycles. Normal power consumption is only 3mW, whether the switch is on or off. These parts are TTL/CMOS compatible and will switch any voltage within their power-supply range. The devices are single-pole/double-throw SPDT switches. The MAX4659/MAX4660 contain one normally closed NC switch and one normally open NO switch. The MAX4659/MAX4660s’ power-supply range is from ±4.5V to ±20V for dual-supply operation and +9V to +40V for single-supply operation. These switches can operate from any combination of supplies, within a 40V V+ to V- range. They conduct equally well in either direction and can handle rail-to-rail analog signals. The off-leakage current is only 1nA max at TA = +25°C. The MAX4659 is available in 8-pin and SO packages. The MAX4660 is available in thermally enhanced exposed paddle µMAX and SO packages. Relay Replacement Test Equipment Communication Systems xDSL Modems PBX, PABX Systems Audio Signal Routing Audio Systems PC Multimedia Boards Redundant/Backup Systems High Continuous Current Handling 150mA Continuous Current MAX4660 75mA Continuous Current MAX4659 High Peak Current Handling 200mA Peak Current MAX4660 150mA Peak Current MAX4659 max On-Resistance ±15V Supplies VL Supply Not Required max RON Flatness ±15V Supplies Rail-to-Rail Signal Handling +12V Single Supply or ±15V Dual-Supply Operation Pin Compatible with DG419, MAX319 Ordering Information PART TEMP RANGE MAX4659EUA -40°C to +85°C MAX4659ESA -40°C to +85°C MAX4660EUA -40°C to +85°C MAX4660ESA -40°C to +85°C EP = Exposed paddle. PINPACKAGE 8 µMAX 8 SO 8 µMAX-EP 8 SO-EP* PKG CODE U8-1 S8-2 U8E-2 S8E-12 Pin Configuration TOP VIEW COM 1 GND 3 MAX4659 MAX4660 5 N.C. µMAX/SO* *EXPOSED PADDLE CONNECTED TO V+ OR LEFT UNCONNECTED µMAX is a registered trademark of Maxim Integrated Products, Inc. MAX4659/MAX4660 LOGIC SWITCH SHOWN FOR LOCIC "0" INPUT Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at MAX4659/MAX4660 High-Current, SPDT, CMOS Analog Switches ABSOLUTE MAXIMUM RATINGS V+ to GND to +44V V- to GND to +0.3V V+ to +44V All Other Pins to GND Note 1 V- - 0.3V to V+ + 0.3V Continuous Current COM, NO, NC MAX4660 ..............±150mA Continuous Current COM, NO, NC MAX4659 ................±75mA Continuous Current IN Peak Current COM, NO, NC MAX4660 pulsed at 1ms, 10% duty cycle ..............±200mA MAX4659 pulsed at 1ms, 10% duty cycle ..............±150mA Continuous Power Dissipation TA = +70°C 8-Pin µMAX-EP derate 10.3mW/°C above +70°C 8-Pin µMAX derate 4.50mW/°C above +70°C 8-Pin SO-EP derate 18.9mW/°C above +70°C 8-Pin SO derate 5.88mW/°C above +70°C Operating Temperature Ranges to +85°C Junction Temperature Storage Temperature Range .............................-65°C to +150°C Lead Temperature soldering, 10s .................................+300°C Note 1 Signals on NO, NC, COM, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward-diode current to maximum current rating. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL Supplies V+ = +15V, V- = -15V, VIH = 2.4V, VIL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C. Notes 2, 6 PARAMETER ANALOG SWITCH CONDITIONS Analog Signal Range On-Resistance On-Resistance Matching Between Channels On-Resistance Flatness Note 3 NO or NC Off-Leakage Current Note 4 COM On-Leakage Current Note 4 VCOM, VNO, VNC ICOM = 50mA VNO or VNC = ±10V +25°C TMIN to TMAX ICOM = 50mA VNO or VNC = ±10V +25°C TMIN to TMAX RFLAT ON ICOM = 50mA VNO or VNC = -5V, 0, +5V +25°C TMIN to TMAX INO OFF or VCOM = -14.5V, +14.5V VNO +25°C INC OFF or VNC = +14.5V, -14.5V TMIN to TMAX -10 ICOM ON VCOM = +14.5V, -14.5V VNO or VNC = +14.5V, -14.5V, or floating +25°C TMIN to TMAX -20 DYNAMIC CHARACTERISTICS Transition Time Break-Before-Make Delay tTRANS tBBM VNO or VNC = 10V RL = CL = 35pF Figure 3

PDF Datasheet Preview

MAX4659/MAX4660

High-Current, SPDT, CMOS Analog Switches

The MAX4659/MAX4660 are medium voltage CMOS analog switches with a low on-resistance of max specifically designed to handle large switch currents. With a switch capability of up to 200mA peak current and 150mA continuous current MAX4660 , and up to 150mA peak current and 75mA continuous current MAX4659 , these parts can switch loads as low as They can replace reed relays with a million times the speed and a virtually unlimited number of lifetime cycles. Normal power consumption is only 3mW, whether the switch is on or off. These parts are TTL/CMOS compatible and will switch any voltage within their power-supply range.

The devices are single-pole/double-throw SPDT switches. The MAX4659/MAX4660 contain one normally closed NC switch and one normally open NO switch.

The MAX4659/MAX4660s’ power-supply range is from ±4.5V to ±20V for dual-supply operation and +9V to +40V for single-supply operation. These switches can operate from any combination of supplies, within a 40V V+ to V- range. They conduct equally well in either direction and can handle rail-to-rail analog signals. The off-leakage current is only 1nA max at TA = +25°C. The MAX4659 is available in 8-pin and SO packages. The MAX4660 is available in thermally enhanced exposed paddle µMAX and SO packages.

Relay Replacement

Test Equipment

Communication Systems
xDSL Modems

PBX, PABX Systems

Audio Signal Routing

Audio Systems

PC Multimedia Boards

Redundant/Backup Systems

High Continuous Current Handling 150mA Continuous Current MAX4660 75mA Continuous Current MAX4659

High Peak Current Handling 200mA Peak Current MAX4660 150mA Peak Current MAX4659
max On-Resistance ±15V Supplies

VL Supply Not Required max RON Flatness ±15V Supplies Rail-to-Rail Signal Handling
+12V Single Supply or ±15V Dual-Supply Operation

Pin Compatible with DG419, MAX319
Ordering Information

PART

TEMP RANGE

MAX4659EUA -40°C to +85°C MAX4659ESA -40°C to +85°C MAX4660EUA -40°C to +85°C MAX4660ESA -40°C to +85°C *EP = Exposed paddle.

PINPACKAGE 8 µMAX 8 SO 8 µMAX-EP* 8 SO-EP*

PKG CODE U8-1 S8-2 U8E-2 S8E-12

Pin Configuration

TOP VIEW

COM 1

GND 3

MAX4659 MAX4660
5 N.C.
µMAX/SO*
*EXPOSED PADDLE CONNECTED

TO V+ OR LEFT UNCONNECTED
µMAX is a registered trademark of Maxim Integrated Products, Inc.

MAX4659/MAX4660

LOGIC

SWITCH SHOWN FOR LOCIC "0" INPUT

Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at

MAX4659/MAX4660

High-Current, SPDT, CMOS Analog Switches

ABSOLUTE MAXIMUM RATINGS

V+ to GND to +44V V- to GND to +0.3V V+ to +44V All Other Pins to GND Note 1 V- - 0.3V to V+ + 0.3V Continuous Current COM, NO, NC MAX4660 ..............±150mA Continuous Current COM, NO, NC MAX4659 ................±75mA Continuous Current IN Peak Current COM, NO, NC

MAX4660 pulsed at 1ms, 10% duty cycle ..............±200mA MAX4659 pulsed at 1ms, 10% duty cycle ..............±150mA Continuous Power Dissipation TA = +70°C 8-Pin µMAX-EP derate 10.3mW/°C above +70°C
8-Pin µMAX derate 4.50mW/°C above +70°C
8-Pin SO-EP derate 18.9mW/°C above +70°C
8-Pin SO derate 5.88mW/°C above +70°C

Operating Temperature Ranges to +85°C

Junction Temperature Storage Temperature Range .............................-65°C to +150°C Lead Temperature soldering, 10s .................................+300°C

Note 1 Signals on NO, NC, COM, or IN exceeding V+ or V- are clamped by internal diodes. Limit forward-diode current to maximum current rating.

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL Supplies

V+ = +15V, V- = -15V, VIH = 2.4V, VIL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C. Notes 2, 6

PARAMETER ANALOG SWITCH

CONDITIONS

Analog Signal Range

On-Resistance

On-Resistance Matching Between Channels On-Resistance Flatness Note 3 NO or NC Off-Leakage Current Note 4

COM On-Leakage Current Note 4

VCOM,

VNO, VNC

ICOM = 50mA VNO or VNC = ±10V
+25°C TMIN to TMAX

ICOM = 50mA VNO or VNC = ±10V
+25°C TMIN to TMAX

RFLAT ON

ICOM = 50mA VNO or VNC = -5V, 0, +5V
+25°C TMIN to TMAX

INO OFF or VCOM = -14.5V, +14.5V VNO
+25°C

INC OFF or VNC = +14.5V, -14.5V

TMIN to TMAX -10

ICOM ON

VCOM = +14.5V, -14.5V VNO or VNC = +14.5V, -14.5V, or floating
+25°C

TMIN to TMAX -20

DYNAMIC CHARACTERISTICS Transition Time Break-Before-Make Delay
tTRANS tBBM

VNO or VNC = 10V RL = CL = 35pF Figure 3

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX4659EUA-T Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX4659EUA-T 647350