MAX3863EVKIT

MAX3863EVKIT Datasheet

MAX3863 Evaluation Kit

Part	Datasheet
MAX3863EVKIT	MAX3863EVKIT (pdf)

PDF Datasheet Preview
MAX3863 Evaluation Kit Evaluates MAX3863 The MAX3863 evaluation kit EV kit is an assembled demonstration board. The MAX3863 EV kit contains two circuits, one for electrical evaluation and one for optical evaluation. The output of the electrical evaluation section is interfaced to an SMA connector, which can be connected to a terminated oscilloscope. The output of the optical evaluation section is configured for attachment to a laser/monitor diode. Component Suppliers SUPPLIER PHONE 843-444-2863 843-626-3123 EFJohnson 402-474-4800 402-474-4858 Murata 415-964-6321 415-964-8165 Venkel 800-950-8365 512-794-0087 Note Please indicate that you are using the MAX3863 when contacting these component suppliers. DESIGNATION QTY C15, C16, C25, C26, C29, C31, C32, C37, C45 0.01µF ±10%, 10V ceramic capacitors 0402 C18, C21, C23, C24, C27, C28 0.1µF ±10%, 10V ceramic capacitors 0402 1 470pF ±10%, 10V ceramic capacitors 0402 1 0.015µF ±10V, 10% ceramic capacitor 0402 1 10µF ±10%, 10V tantalum capacitor, case B 0.01µF ±10%, 10V ceramic capacitor 0603 LED red T1 pkg Digi-Key P363-ND SMA connectors, edge mount, round contacts 4 EFJohnson 142-0701-801 Note Cut center pin to approximately 1/16in length. Fully Assembled and Tested 3.3V Operation Fully Matched for Best Return Loss Independent Electrical Monitoring of Modulation and Bias Currents Automatic Power Control APC Loop Test Circuit PART MAX3863EVKIT Ordering Information TEMP RANGE -40°C to +85°C IC PACKAGE 32 QFN Electrical Component List DESIGNATION QTY SMA connector, edge mount, tab 1 contact EFJohnson 142-0701-851 1 4-pin header, 0.1in center Digi-Key S1012-36-ND JU4, JU7, JU9, JU10, JU12, JU16, JU19 Shunts Digi-Key S9000-ND JU7, JU12, JU16, JU19 4 2-pin headers, 0.1in centers Digi-Key S1012-36-ND JU8, JU11, JU13, JU14, JU17, JU18 6 Open JU9, JU10 3-pin headers, 0.1in centers Digi-Key S1012-36-ND L7, L12 L9 33µH inductors 0805 Toko FSLB2520-330K 1.2µH inductor Coilcraft 1008CS-122XKBC Maxim Integrated Products 1 For pricing delivery, and ordering information please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at Evaluates MAX3863 MAX3863 Evaluation Kit Electrical Component List continued DESIGNATION QTY L10, L11 2µH inductors 0603 Murata BLM18AG601SN1 1 PNP XSTR Zetex FMMT591 R4, R5, R26, R28, R37, R42 6 Open R12, R13, R43 R17 R22 R23, R25 R29 R30, R31 R32 R33, R40 R34 R38 R41 R46 R47 R51 TP2, TP3, TP8, TP17, TP18, TP31, TP32 3 variable resistors Bourns 3296 1 ±1% resistor 0603 1 ±1% resistor 0402 2 Open 0402 1 ±1% resistor 0402 2 ±1% resistors 0603 1 ±1% resistor 0402 2 resistors 0402 1 ±1% resistor 0402 1 ±1% resistor 0402 1 Open, variable resistor 1 ±1% resistor 0603 1 ±1% resistor 0603 1 ±1% resistor 0402 Test points Digi-Key 5000K-ND MAX3863EGJ 32-pin QFN Note U1 has an exposed pad, 1 which requires that it be solder attached to the circuit board to ensure proper functionality of the part. 1 MAX495ESA 8-pin SO Optical Component List DESIGNATION C9, C14, C17, C33, 0.01µF ±10%, 10V ceramic capacitors 0402 C6 C7, C8 C19 C20, C22 C34 C36 D1 D2 JU1, JU2 0.015µF ±10%, 10V ceramic capacitor 0402 5 0.1µF ±10%, 10V ceramic capacitors 0402 1 470pF ±10%, 10V ceramic capacitor 0402 1 10µF ±10%, 10V tantalum capacitor, case B 2 0.01µF ±10%, 10V ceramic capacitors 0603 1 1pF ±10%, 10V ceramic capacitor 0201 1 100pF ±5%, 10V ceramic capacitor 0603 LED, red T1 pkg Digi-Key 363-ND 1 Laser diode, not included SMA connectors, edge mount, round contact 4 EFJohnson 142-0701-801 Note Cut center pin to approximately 1/16in long. 3-pin headers, 0.1in centers Digi-Key S1012-36-ND

PDF Datasheet Preview

MAX3863 Evaluation Kit

Evaluates MAX3863

The MAX3863 evaluation kit EV kit is an assembled demonstration board.

The MAX3863 EV kit contains two circuits, one for electrical evaluation and one for optical evaluation. The output of the electrical evaluation section is interfaced to an SMA connector, which can be connected to a terminated oscilloscope. The output of the optical evaluation section is configured for attachment to a laser/monitor diode.

Component Suppliers

SUPPLIER

PHONE
843-444-2863
843-626-3123

EFJohnson
402-474-4800
402-474-4858

Murata
415-964-6321
415-964-8165

Venkel
800-950-8365
512-794-0087

Note Please indicate that you are using the MAX3863 when contacting these component suppliers.

DESIGNATION QTY

C15, C16, C25, C26, C29, C31, C32, C37, C45
0.01µF ±10%, 10V ceramic capacitors 0402

C18, C21, C23, C24, C27, C28
0.1µF ±10%, 10V ceramic capacitors 0402
1 470pF ±10%, 10V ceramic
capacitors 0402
1 0.015µF ±10V, 10% ceramic
capacitor 0402
1 10µF ±10%, 10V tantalum
capacitor, case B
0.01µF ±10%, 10V ceramic capacitor 0603

LED red T1 pkg Digi-Key P363-ND

SMA connectors, edge mount, round contacts 4 EFJohnson 142-0701-801 Note Cut center pin to approximately 1/16in length.

Fully Assembled and Tested 3.3V Operation Fully Matched for Best Return Loss Independent Electrical Monitoring of Modulation
and Bias Currents Automatic Power Control APC Loop Test Circuit

PART MAX3863EVKIT
Ordering Information

TEMP RANGE -40°C to +85°C

IC PACKAGE 32 QFN

Electrical Component List

DESIGNATION QTY

SMA connector, edge mount, tab
1 contact

EFJohnson 142-0701-851
1 4-pin header, 0.1in center

Digi-Key S1012-36-ND

JU4, JU7, JU9, JU10, JU12, JU16, JU19

Shunts Digi-Key S9000-ND

JU7, JU12, JU16, JU19
4 2-pin headers, 0.1in centers Digi-Key S1012-36-ND

JU8, JU11, JU13, JU14, JU17, JU18
6 Open

JU9, JU10
3-pin headers, 0.1in centers Digi-Key S1012-36-ND

L7, L12 L9
33µH inductors 0805 Toko FSLB2520-330K
1.2µH inductor Coilcraft 1008CS-122XKBC

Maxim Integrated Products 1
For pricing delivery, and ordering information please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at

Evaluates MAX3863

MAX3863 Evaluation Kit

Electrical Component List continued

DESIGNATION QTY

L10, L11
2µH inductors 0603 Murata BLM18AG601SN1
1 PNP XSTR

Zetex FMMT591

R4, R5, R26, R28, R37, R42
6 Open

R12, R13, R43

R17 R22 R23, R25 R29 R30, R31 R32 R33, R40 R34 R38 R41 R46 R47 R51 TP2, TP3, TP8, TP17, TP18, TP31, TP32
3 variable resistors Bourns 3296
1 ±1% resistor 0603 1 ±1% resistor 0402 2 Open 0402 1 ±1% resistor 0402 2 ±1% resistors 0603 1 ±1% resistor 0402 2 resistors 0402 1 ±1% resistor 0402 1 ±1% resistor 0402 1 Open, variable resistor 1 ±1% resistor 0603 1 ±1% resistor 0603 1 ±1% resistor 0402

Test points Digi-Key 5000K-ND

MAX3863EGJ 32-pin QFN

Note U1 has an exposed pad,
1 which requires that it be solder
attached to the circuit board to
ensure proper functionality of the
part.
1 MAX495ESA 8-pin SO

Optical Component List

DESIGNATION

C9, C14, C17, C33,
0.01µF ±10%, 10V ceramic capacitors 0402

C6 C7,

C8 C19 C20, C22 C34 C36 D1 D2

JU1, JU2
0.015µF ±10%, 10V ceramic capacitor 0402
5 0.1µF ±10%, 10V ceramic capacitors 0402
1 470pF ±10%, 10V ceramic capacitor 0402
1 10µF ±10%, 10V tantalum capacitor, case B
2 0.01µF ±10%, 10V ceramic capacitors 0603
1 1pF ±10%, 10V ceramic capacitor 0201
1 100pF ±5%, 10V ceramic capacitor 0603

LED, red T1 pkg Digi-Key 363-ND
1 Laser diode, not included

SMA connectors, edge mount, round contact 4 EFJohnson 142-0701-801 Note Cut center pin to approximately 1/16in long.
3-pin headers, 0.1in centers Digi-Key S1012-36-ND

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX3863EVKIT Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX3863EVKIT 647330