MAX338CSE

MAX338CSE Datasheet

MAX338/MAX339

Part	Datasheet
MAX338CSE	MAX338CSE (pdf)

Related Parts	Information
MAX339CPE	MAX339CPE
MAX339CSE	MAX339CSE

PDF Datasheet Preview
MAX338/MAX339 8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers The MAX338/MAX339 are monolithic, CMOS analog multiplexers muxes . The 8-channel MAX338 is designed to connect one of eight inputs to a common output by control of a 3-bit binary address. The dual, 4channel MAX339 is designed to connect one of four inputs to a common output by control of a 2-bit binary address. Both devices can be used as either a mux or a demux. On-resistance is max, and the devices conduct current equally well in both directions. These muxes feature extremely low off leakages less than 20pA at +25°C , and extremely low on-channel leakages less than 50pA at +25°C . The new design offers guaranteed low charge injection 1.5pC typ and electrostatic discharge ESD protection greater than 2000V, per method These improved muxes are pin-compatible upgrades for the industry-standard DG508A and DG509A. For similar Maxim devices with lower leakage and charge injection but higher on-resistance, see the MAX328 and MAX329. The MAX338/MAX339 operate from a single +4.5V to +30V supply or from dual supplies of ±4.5V to ±20V. All control inputs whether address or enable are TTL compatible +0.8V to +2.4V over the full specified temperature range and over the ±4.5V to ±18V supply range. These parts are fabricated with Maxim’s 44V silicon-gate process. Data-Acquisition Systems Test Equipment Military Radios Guidance and Control Systems Sample-and-Hold Circuits Heads-Up Displays Communications Systems PBX, PABX On-Resistance, max Transition Time, <500ns On-Resistance Match, NO-Off Leakage Current, <20pA at +25°C 1.5pC Charge Injection Single-Supply Operation +4.5V to +30V Bipolar-Supply Operation ±4.5V to ±20V Plug-In Upgrade for Industry-Standard DG508A/DG509A Rail-to-Rail Signal Handling TTL/CMOS-Logic Compatible ESD Protection >2000V, per Method Ordering Information PART TEMP RANGE PIN-PACKAGE MAX338CPE 0°C to +70°C 16 Plastic DIP MAX338CSE 0°C to +70°C 16 Narrow SO MAX338C/D 0°C to +70°C Dice* MAX338ETE -40°C to +85°C 16 Thin QFN 5mm x 5mm MAX338EPE -40°C to +85°C 16 Plastic DIP MAX338ESE -40°C to +85°C 16 Narrow SO MAX338EJE -40°C to +85°C 16 CERDIP MAX338MJE -55°C to +125°C 16 CERDIP** Ordering Information continued at end of data sheet. Contact factory for dice specifications. Contact factory for availability. Configurations/Functional Diagrams/Truth Tables TOP VIEW A0 1 EN 2 V- 3 NO1 4 NO2 5 NO3 6 NO4 7 COM 8 MAX338 16 A1 15 A2 14 GND 13 V+ 12 NO5 11 NO6 10 NO7 9 NO8 DIP/SO Pin Configurations/Functional Diagrams/Truth Tables continued at end of data sheet. NO1 NO2 NO3 NO4 COM NO5 NO6 NO7 NO8 CMOS DECODE LOGIC MAX338 8-CHANNEL SINGLE-ENDED MULTIPLEXER Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at MAX338/MAX339 8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers ABSOLUTE MAXIMUM RATINGS Voltage Referenced to VV+ 44V GND 25V Digital Inputs, NO, COM Note 1 ........... V- - 2V to V+ + 2V or 30mA whichever occurs first Continuous Current any terminal Peak Current, NO or COM pulsed at 1ms, 10% duty cycle max ..........................100mA Continuous Power Dissipation TA = +70°C Plastic DIP derate 10.53mW/°C above +70°C ..........842mW Narrow SO derate 8.70mW/°C above +70°C ............696mW 16-Pin TQFN derate 21.3mW/°C above +70°C .......1702mW CERDIP derate 10.00mW/°C above +70°C ...............800mW Operating Temperature Ranges MAX33_C__ to +70°C to +85°C MAX33_MJE to +125°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature soldering, 10sec .............................+300°C Note 1 Signals on NO, COM, EN, A0, A1, or A2 exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current ratings. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL Supplies V+ = +15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted. PARAMETER CONDITIONS MIN TYP MAX Note 2 SWITCH Analog Signal Range VNO, VCOM Note 3 On-Resistance On-Resistance Matching Between Channels NO-Off Leakage Current Note 5 COM-Off Leakage Current Note 5 RON INO OFF ICOM OFF INO = 0.2mA, VCOM = ±10V INO = 0.2mA, VCOM = ±10V Note 4 VCOM = +10V, VNO = ±10V, VEN = 0V VNO = ±10V, VCOM = +10V, MAX338 VEN = 0V VNO = +10V, VCOM = ±10V, MAX339 VEN = 0V TA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN to TMAX TA = +25°C TA = TMIN C, E to TMAX TA = +25°C TA = TMIN C, E to TMAX Ordering Information continued PART MAX339CPE TEMP RANGE PIN-PACKAGE 0°C to +70°C 16 Plastic DIP MAX339CSE MAX339C/D MAX339ETE MAX339EPE MAX339ESE MAX339EJE MAX339MJE 0°C to +70°C 0°C to +70°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -55°C to +125°C 16 Narrow SO Dice 16 Thin QFN 5mm x 5mm 16 Plastic DIP 16 Narrow SO 16 CERDIP 16 CERDIP** Contact factory for dice specifications. *Contact factory for availability. Pin Configurations/Functional Diagrams/Truth Tables continued TOP VIEW LOGIC 12 GND NO1 2 11 V+ NO2 3 10 NO5 NO3 4 9 NO6 EN A0 A1 GND LOGIC 12 V+ NO1A 2 11 NO1B NO2A 3 10 NO2B NO3A 4 9 NO3B NO4 COM NO8 NO7 NO4A COMA COMB NO4B MAX338 Thin QFN MAX339 Thin QFN MAX338/MAX339 8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers Topographies MAX338 MAX339 EN A0 A1 A2 GND EN A0 A1 N.C. GND VNO1 NO2 NO3 COM NO8 1.98mm NO5 NO6 N.C.

PDF Datasheet Preview

MAX338/MAX339
8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers

The MAX338/MAX339 are monolithic, CMOS analog multiplexers muxes . The 8-channel MAX338 is designed to connect one of eight inputs to a common output by control of a 3-bit binary address. The dual, 4channel MAX339 is designed to connect one of four inputs to a common output by control of a 2-bit binary address. Both devices can be used as either a mux or a demux. On-resistance is max, and the devices conduct current equally well in both directions.

These muxes feature extremely low off leakages less than 20pA at +25°C , and extremely low on-channel leakages less than 50pA at +25°C . The new design offers guaranteed low charge injection 1.5pC typ and electrostatic discharge ESD protection greater than 2000V, per method These improved muxes are pin-compatible upgrades for the industry-standard DG508A and DG509A. For similar Maxim devices with lower leakage and charge injection but higher on-resistance, see the MAX328 and MAX329.

The MAX338/MAX339 operate from a single +4.5V to +30V supply or from dual supplies of ±4.5V to ±20V. All control inputs whether address or enable are TTL compatible +0.8V to +2.4V over the full specified temperature range and over the ±4.5V to ±18V supply range. These parts are fabricated with Maxim’s 44V silicon-gate process.

Data-Acquisition Systems Test Equipment Military Radios Guidance and Control Systems

Sample-and-Hold Circuits Heads-Up Displays Communications Systems PBX, PABX

On-Resistance, max Transition Time, <500ns On-Resistance Match, NO-Off Leakage Current, <20pA at +25°C 1.5pC Charge Injection Single-Supply Operation +4.5V to +30V

Bipolar-Supply Operation ±4.5V to ±20V Plug-In Upgrade for Industry-Standard

DG508A/DG509A Rail-to-Rail Signal Handling TTL/CMOS-Logic Compatible ESD Protection >2000V, per Method
Ordering Information

PART

TEMP RANGE PIN-PACKAGE

MAX338CPE
0°C to +70°C 16 Plastic DIP

MAX338CSE
0°C to +70°C 16 Narrow SO

MAX338C/D
0°C to +70°C Dice*

MAX338ETE -40°C to +85°C 16 Thin QFN 5mm x 5mm

MAX338EPE -40°C to +85°C 16 Plastic DIP

MAX338ESE -40°C to +85°C 16 Narrow SO

MAX338EJE -40°C to +85°C 16 CERDIP

MAX338MJE -55°C to +125°C 16 CERDIP**
Ordering Information continued at end of data sheet. *Contact factory for dice specifications. **Contact factory for availability.

Configurations/Functional Diagrams/Truth Tables

TOP VIEW

A0 1 EN 2 V- 3 NO1 4 NO2 5 NO3 6 NO4 7 COM 8

MAX338
16 A1 15 A2 14 GND 13 V+ 12 NO5 11 NO6 10 NO7 9 NO8

DIP/SO Pin Configurations/Functional Diagrams/Truth Tables continued at end of data sheet.

NO1 NO2 NO3 NO4

COM NO5 NO6 NO7 NO8

CMOS DECODE LOGIC

MAX338 8-CHANNEL SINGLE-ENDED MULTIPLEXER

Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at

MAX338/MAX339
8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers

ABSOLUTE MAXIMUM RATINGS

Voltage Referenced to VV+ 44V GND 25V

Digital Inputs, NO, COM Note 1 ........... V- - 2V to V+ + 2V or 30mA whichever occurs first

Continuous Current any terminal Peak Current, NO or COM
pulsed at 1ms, 10% duty cycle max ..........................100mA

Continuous Power Dissipation TA = +70°C Plastic DIP derate 10.53mW/°C above +70°C ..........842mW Narrow SO derate 8.70mW/°C above +70°C ............696mW 16-Pin TQFN derate 21.3mW/°C above +70°C .......1702mW CERDIP derate 10.00mW/°C above +70°C ...............800mW

Operating Temperature Ranges MAX33_C__ to +70°C to +85°C MAX33_MJE to +125°C

Storage Temperature Range .............................-65°C to +150°C Lead Temperature soldering, 10sec .............................+300°C

Note 1 Signals on NO, COM, EN, A0, A1, or A2 exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current ratings.

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL Supplies

V+ = +15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.

PARAMETER

CONDITIONS

MIN TYP MAX Note 2

SWITCH

Analog Signal Range

VNO, VCOM

Note 3

On-Resistance On-Resistance Matching Between Channels NO-Off Leakage Current Note 5

COM-Off Leakage Current Note 5

RON INO OFF

ICOM OFF

INO = 0.2mA, VCOM = ±10V

INO = 0.2mA, VCOM = ±10V Note 4

VCOM = +10V, VNO = ±10V, VEN = 0V

VNO = ±10V, VCOM = +10V, MAX338 VEN = 0V

VNO = +10V, VCOM = ±10V, MAX339 VEN = 0V

TA = +25°C

TA = TMIN to TMAX

TA = +25°C

TA = TMIN to TMAX

TA = +25°C

TA = TMIN C, E
to TMAX

TA = +25°C

TA = TMIN C, E
to TMAX
Ordering Information continued

PART MAX339CPE

TEMP RANGE PIN-PACKAGE 0°C to +70°C 16 Plastic DIP

MAX339CSE MAX339C/D MAX339ETE MAX339EPE MAX339ESE MAX339EJE MAX339MJE
0°C to +70°C 0°C to +70°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -55°C to +125°C
16 Narrow SO Dice* 16 Thin QFN 5mm x 5mm 16 Plastic DIP 16 Narrow SO 16 CERDIP 16 CERDIP**
*Contact factory for dice specifications. **Contact factory for availability.

Pin Configurations/Functional Diagrams/Truth Tables continued

TOP VIEW

LOGIC
12 GND

NO1 2
11 V+

NO2 3
10 NO5

NO3 4
9 NO6

EN A0 A1 GND

LOGIC
12 V+

NO1A 2
11 NO1B

NO2A 3
10 NO2B

NO3A 4
9 NO3B

NO4 COM NO8 NO7

NO4A COMA COMB NO4B

MAX338 Thin QFN

MAX339 Thin QFN

MAX338/MAX339
8-Channel/Dual 4-Channel, Low-Leakage, CMOS Analog Multiplexers

Topographies

MAX338

MAX339

EN A0 A1 A2 GND

EN A0 A1 N.C. GND

VNO1 NO2 NO3

COM NO8
1.98mm

NO5 NO6 N.C.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX338CSE Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX338CSE 647299