MAX2990EVKITF#

MAX2990EVKITF# Datasheet

MAX2990EVKIT

Part	Datasheet
MAX2990EVKITF#	MAX2990EVKITF# (pdf)

Related Parts	Information
MAX2990EVKITBC#	MAX2990EVKITBC#
MAX2990EVKITA#	MAX2990EVKITA#

PDF Datasheet Preview
MAX2990EVKIT Evaluation Kit for the MAX2990 and MAX2991 Industry's First OFDM-Based Powerline Communication Modem Delivering 100kbps in the 10kHz to 490kHz Frequency Bands Subscribe Active In Production. But some versions of the family are Not Recommended for New Designs. OVERVIEW The MAX2990 evaluation kit is a highly integrated chipset including the MAX2990 baseband BB and MAX2991 analog front end AFE . This system transfers data over 120V or 240V AC powerlines, DC, or cold wire. The MAX2990 baseband uses an orthogonal frequency division multiplexing modulation OFDM technique that can be configured to operate in the 10kHz to 490kHz frequency band. The MAX2990 evaluation kit contains two modems and the evaluation software. It is assembled and preconfigured to demonstrate performance under a variety of international regulatory requirements. The part number for the different communication standards are as follows: Freq. Band Data Rate Max MAX2990EVKITA# CENELEC A 32kHz to 95kHz 23Kbps MAX2990EVKITB# CENELEC B 95kHz 9.5Kbps 120kHz MAX2990EVKITC# CENELEC C 120kHz 7.7Kbps 140kHz MAX2990EVKITBC# CENELEC BC 95kHz 16Kbps 140kHz MAX2990EVKITF# FCC 150kHz 96Kbps 480kHz MAX2990EVKITR# ARIB 130kHz 93Kbps 450kHz Key Features • Optimized to Operate with the MAX2990 PLC Baseband • Integrated Band Select Filter, AGC, and 10-Bit ADC for Rx Path • Integrated Wave-Shaping Filter, Programmable Predriver Gain, and 10Bit DAC for Tx Path

PDF Datasheet Preview

MAX2990EVKIT

Evaluation Kit for the MAX2990 and MAX2991

Industry's First OFDM-Based Powerline Communication Modem Delivering 100kbps in the 10kHz to 490kHz Frequency Bands

Subscribe

Active In Production. But some versions of the family are Not Recommended for New Designs.

OVERVIEW

The MAX2990 evaluation kit is a highly integrated chipset including the MAX2990 baseband BB and MAX2991 analog front end AFE . This system transfers data over 120V or 240V AC powerlines, DC, or cold wire. The MAX2990 baseband uses an orthogonal frequency division multiplexing modulation OFDM technique that can be configured to operate in the 10kHz to 490kHz frequency band.

The MAX2990 evaluation kit contains two modems and the evaluation software. It is assembled and preconfigured to demonstrate performance under a variety of international regulatory requirements. The part number for the different communication standards are as follows:

Freq. Band

Data Rate Max

MAX2990EVKITA#

CENELEC A
32kHz to 95kHz
23Kbps

MAX2990EVKITB#

CENELEC B
95kHz
9.5Kbps
120kHz

MAX2990EVKITC#

CENELEC C
120kHz
7.7Kbps
140kHz

MAX2990EVKITBC#

CENELEC BC
95kHz
16Kbps
140kHz

MAX2990EVKITF# FCC
150kHz
96Kbps
480kHz

MAX2990EVKITR# ARIB
130kHz
93Kbps
450kHz

Key Features
• Optimized to Operate with the MAX2990 PLC Baseband
• Integrated Band Select Filter, AGC, and 10-Bit ADC for Rx Path
• Integrated Wave-Shaping Filter, Programmable Predriver Gain, and 10Bit DAC for Tx Path

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX2990EVKITF# Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX2990EVKITF# 647288