MAX14690EVKIT#

MAX14690EVKIT# Datasheet

MAX14690 Evaluation Kit

Part	Datasheet
MAX14690EVKIT#	MAX14690EVKIT# (pdf)

PDF Datasheet Preview
MAX14690 Evaluation Kit Evaluates MAX14690 The MAX14690 evaluation kit EV kit is a fully assembled and tested circuit for evaluating the MAX14690 wearable charge-management solution with I2C capability for lowpower wearable application. The device includes a linear battery charger, Smart Power Selector , two ultra-low quiescent current buck regulators, and three low-dropout LDO linear regulators. Refer to the MAX14690 IC data sheet for detailed information regarding the operation and features of the devices. ●● RoHS Compliant ●● Proven PCB Layout ●● Full Assembled and Tested ●● I2C Serial Interface Detailed Description of Hardware The MAX14690 evaluation kit EV Kit evaluates the MAX14690 wearable charge-management solution. See Table 1 through Table 3 for pin descriptions of the three connectors Ordering Information appears at end of data sheet. Smart Power Selector is a trademark of Maxim Integrated Products, Inc. MAX14690 Evaluation Kit Evaluates MAX14690 Table Connector J1 PIN MAX14690 Ground Voltage Monitor Output N.C. Not Connected Open-Drain, Active-Low Interrupt Output Power-On Reset Output. I2C Serial Data Input/Output I2C Serial Clock Input MPC1 Multipurpose Configuration Input 1 MPC0 Multipurpose Configuration Input 0 PFN2 Power Function Control Input/Output PFN1 Power Function Control Input Ground Table Connector J2 PIN SIGNAL L3IN LDO3 Input L3OUT LDO3 Output L2OUT LDO2 Output L1OUT LDO1 Output B2OUT Buck Regulator 2 Output B1OUT Buck Regulator 1 Output L2IN LDO2 Input L1IN LDO1 Input Table Connector J3 PIN SIGNAL Ground CHRGIN Charger Input System Load Connection Battery Battery Temperature Thermistor Connection Bypass for Internal LDO External Resistor Connection for Configuring Battery Charge Current Ordering Information PART MAX14690EVKIT# #Denotes RoHS compliant. TYPE EV Kit MAX14690 EV Silkscreen Maxim Integrated 6 MAX14690 Evaluation Kit 12/16 Initial release Evaluates MAX14690 PAGES CHANGED For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. 2016 Maxim Integrated Products, Inc. 7

PDF Datasheet Preview

MAX14690 Evaluation Kit

Evaluates MAX14690

The MAX14690 evaluation kit EV kit is a fully assembled and tested circuit for evaluating the MAX14690 wearable charge-management solution with I2C capability for lowpower wearable application. The device includes a linear battery charger, Smart Power Selector , two ultra-low quiescent current buck regulators, and three low-dropout LDO linear regulators.

Refer to the MAX14690 IC data sheet for detailed information regarding the operation and features of the devices.
●● RoHS Compliant
●● Proven PCB Layout
●● Full Assembled and Tested
●● I2C Serial Interface

Detailed Description of Hardware

The MAX14690 evaluation kit EV Kit evaluates the MAX14690 wearable charge-management solution. See Table 1 through Table 3 for pin descriptions of the three connectors
Ordering Information appears at end of data sheet.

Smart Power Selector is a trademark of Maxim Integrated Products, Inc.

MAX14690 Evaluation Kit

Evaluates MAX14690

Table Connector J1

PIN MAX14690

Ground

Voltage Monitor Output

N.C.

Not Connected

Open-Drain, Active-Low Interrupt Output

Power-On Reset Output.

I2C Serial Data Input/Output

I2C Serial Clock Input

MPC1 Multipurpose Configuration Input 1

MPC0 Multipurpose Configuration Input 0

PFN2 Power Function Control Input/Output

PFN1 Power Function Control Input

Ground

Table Connector J2

PIN SIGNAL

L3IN

LDO3 Input

L3OUT LDO3 Output

L2OUT LDO2 Output

L1OUT LDO1 Output

B2OUT Buck Regulator 2 Output

B1OUT Buck Regulator 1 Output

L2IN

LDO2 Input

L1IN

LDO1 Input

Table Connector J3

PIN SIGNAL

Ground

CHRGIN Charger Input

System Load Connection

Battery

Battery Temperature Thermistor Connection

Bypass for Internal LDO

External Resistor Connection for Configuring Battery Charge Current
Ordering Information

PART MAX14690EVKIT# #Denotes RoHS compliant.

TYPE EV Kit

MAX14690 EV Silkscreen

Maxim Integrated 6

MAX14690 Evaluation Kit
12/16 Initial release

Evaluates MAX14690

PAGES CHANGED
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at

Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time.

Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.
2016 Maxim Integrated Products, Inc. 7

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX14690EVKIT# Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX14690EVKIT# 647228