MAX14001EVSYS#

MAX14001EVSYS# Datasheet

MAX14001/MAX14002 Evaluation System

Part	Datasheet
MAX14001EVSYS#	MAX14001EVSYS# (pdf)

Related Parts	Information
MAX14002EVSYS#	MAX14002EVSYS#

PDF Datasheet Preview
MAX14001/MAX14002 Evaluation System Evaluates MAX14001, MAX14002 The MAX14001/14002 evaluation system EV system provides the hardware and software necessary to evaluate the MAX14001 and MAX14002 isolated, single-channel, analog-to-digital converters ADCs with programmable voltage comparators and inrush current control optimized for configurable binary input applications. The MAX14001/ MAX14002 EV kit has Pmod compatible connectors for SPI communication. The EV system includes the USB2PMB2 adapter board that receives commands from a PC through the USB cable to create an SPI interface for communication between the software and the MAX14001/MAX14002 on the EV kit. The EV system includes a graphical user interface GUI that provides communication between the target device and the PC. The MAX14001/MAX14002 EV kit has two MAX14001/MAX14002 devices U1 and U2 that can operate in multiple modes, as shown in Figure 1: 1 Single Channel mode The USB2PMB2 adapter connects to connector PMOD1 or PMOD2 on the EV kit, depending on which channel is preferred, allowing differently configured analog inputs with signal conditioning circuitry. 2 Daisy-Chain mode The USB2PMB2 adapter connects to connector PMOD1, and DOUT from U1 connects to DIN of U2. Both U1 and U2 are controlled from a single SPI interface. 3 Dual Channel mode The USB2PMB2 adapter connects to connector PMOD1 and uses two chipselect signals CS1 and CS2 to control each chip through a single connector/GUI interface. EV System Contents ●● MAX14001EVKIT#, including the MAX14001AAP+ or MAX14002EVKIT#, including the MAX14002AAP+ ●● USB2PMB2# Adapter Board ●● Micro-USB Cable Benefits and Features ●● Easy Evaluation of the MAX14001/MAX14002 ●● EV Kit is USB Powered ●● Daisy-Chainable SPI Interface ●● Internal Voltage Reference or External Voltage Reference ●● Half-Wave Input Rectification Filter or Full-Wave Input Rectification Filter ●● Windows 7, Windows and Windows 10 Compatible Software ●● Fully Assembled and Tested ●● Proven PCB Layout ●● RoHS Compliant Ordering Information appears at end of data sheet. Windows and Windows XP are registered trademarks and registered service marks of Microsoft Corporation. Pmod is a trademark of Digilent, Inc MAX14001/MAX14002 Evaluation System MAX14001/MAX14002 EV Kit Photo Evaluates MAX14001, MAX14002 USB2PMB2 Adapter Board Photo Maxim Integrated 2 MAX14001/MAX14002 Evaluation System MAX14001/MAX14002 EV System Photo Evaluates MAX14001, MAX14002 Note Board standoffs and screws are not included in the EV system. Maxim Integrated 3 MAX14001/MAX14002 Evaluation System Evaluates MAX14001, MAX14002 System Block Diagram 300VDC NOMINAL FULL-WAVE RECTIFIER DEPLETION MODE FET Q 1 AGND 1 300VDC NOMINAL HALF-WAVE RECTIFIER DEPLETION MODE FET Q 2 AGND 2 FIELD-SIDE RESISTOR- DIVIDER EXT AIN GNDF 1 GNDF 1 GNDF 1 FIELD-SIDE RESISTOR- DIVIDER EXT AIN GNDF 2 GNDF 2 GNDF 2 SERIES VREF VDDF AGND 1 REFIN SHUNT VREF Ordering Information PART TYPE MAX14001EVSYS# EV System MAX14002EVSYS# EV System #Denotes RoHS compliant. The MAX14001EVSYS# includes the MAX14001EVKIT# and USB2PMB2#. The MAX14002EVSYS# includes the MAX14002EVKIT# and USB2PMB2#. Maxim Integrated 15 Maxim Integrated 16 MAX14001 Bill of Materials ITEM REF_DES VIN1, VIN2, AINEXT1, AINEXT2, 1 V300_13, FLT1_IN+, FLT1_IN-, FLT2_IN+, FLT2_IN-, V300_13_2 3 C2, C8, C10, C11, C25, C26, C31, C34 4 C3, C29 DNI/DNP QTY 10 5014 MFG PART # 1 BFC233860103 GRM188R72A102KA01 C1608X7R2A102K 2 CGA3E2X7R2A103K C0603C103K1RA 5 C4 6 C5, C6, C13, C30, C32, C37 7 C7, C18, C33, C43 1 F339X134733MFP2B0 GRM188R72A104KA35 CC0603KRX7R0BB104 4 C1608X7R1V105K080AC 8 C14, C15, C35, C36 4 CL21B106KOQNNN 9 C21 10 D1, D2 11 D3, D4 12 DS3, DS4 13 DS5, DS6 14 DS7, DS8 VDD1, VDD2, VDDF1, VDDF2, VDDL1, VDDL2, VREF1, VREF2, EXT_VDD1, EXT_VDD2, EXT_VDDL1, EXT_VDDL2 GNDL, GATE1, GATE2, GNDF1, GNDF2, ISET1, ISET2, GNDF1_T3, GNDL_TP14, GNDF2_TP21 17 J1, J8, J14-J18, J32 18 J2, J4, J12, J26 For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. 2016 Maxim Integrated Products, Inc. 27

PDF Datasheet Preview

MAX14001/MAX14002 Evaluation System

Evaluates MAX14001, MAX14002

The MAX14001/14002 evaluation system EV system provides the hardware and software necessary to evaluate the MAX14001 and MAX14002 isolated, single-channel, analog-to-digital converters ADCs with programmable voltage comparators and inrush current control optimized for configurable binary input applications. The MAX14001/ MAX14002 EV kit has Pmod compatible connectors for SPI communication. The EV system includes the USB2PMB2 adapter board that receives commands from a PC through the USB cable to create an SPI interface for communication between the software and the MAX14001/MAX14002 on the EV kit.

The EV system includes a graphical user interface GUI that provides communication between the target device and the PC. The MAX14001/MAX14002 EV kit has two MAX14001/MAX14002 devices U1 and U2 that can operate in multiple modes, as shown in Figure 1:
1 Single Channel mode The USB2PMB2 adapter connects to connector PMOD1 or PMOD2 on the EV kit, depending on which channel is preferred, allowing differently configured analog inputs with signal conditioning circuitry.
2 Daisy-Chain mode The USB2PMB2 adapter connects to connector PMOD1, and DOUT from U1 connects to DIN of U2. Both U1 and U2 are controlled from a single SPI interface.
3 Dual Channel mode The USB2PMB2 adapter connects to connector PMOD1 and uses two chipselect signals CS1 and CS2 to control each chip through a single connector/GUI interface.

EV System Contents
●● MAX14001EVKIT#, including the MAX14001AAP+ or MAX14002EVKIT#, including the MAX14002AAP+
●● USB2PMB2# Adapter Board
●● Micro-USB Cable

Benefits and Features
●● Easy Evaluation of the MAX14001/MAX14002 ●● EV Kit is USB Powered ●● Daisy-Chainable SPI Interface ●● Internal Voltage Reference or External Voltage

Reference ●● Half-Wave Input Rectification Filter or Full-Wave

Input Rectification Filter ●● Windows 7, Windows and

Windows 10 Compatible Software ●● Fully Assembled and Tested ●● Proven PCB Layout ●● RoHS Compliant
Ordering Information appears at end of data sheet.

Windows and Windows XP are registered trademarks and registered service marks of Microsoft Corporation.

Pmod is a trademark of Digilent, Inc

MAX14001/MAX14002 Evaluation System

MAX14001/MAX14002 EV Kit Photo

Evaluates MAX14001, MAX14002

USB2PMB2 Adapter Board Photo

Maxim Integrated 2

MAX14001/MAX14002 Evaluation System

MAX14001/MAX14002 EV System Photo

Evaluates MAX14001, MAX14002

Note Board standoffs and screws are not included in the EV system.

Maxim Integrated 3

MAX14001/MAX14002 Evaluation System

Evaluates MAX14001, MAX14002

System Block Diagram
300VDC NOMINAL

FULL-WAVE RECTIFIER

DEPLETION MODE FET Q 1

AGND 1
300VDC NOMINAL

HALF-WAVE RECTIFIER

DEPLETION MODE FET Q 2

AGND 2

FIELD-SIDE

RESISTOR-

DIVIDER

EXT AIN

GNDF 1 GNDF 1

GNDF 1

FIELD-SIDE

RESISTOR-

DIVIDER

EXT AIN

GNDF 2 GNDF 2

GNDF 2

SERIES VREF

VDDF

AGND 1

REFIN

SHUNT VREF
Ordering Information

PART

TYPE

MAX14001EVSYS#

EV System

MAX14002EVSYS#

EV System
#Denotes RoHS compliant.

The MAX14001EVSYS# includes the MAX14001EVKIT# and USB2PMB2#.

The MAX14002EVSYS# includes the MAX14002EVKIT# and USB2PMB2#.

Maxim Integrated 15

Maxim Integrated 16

MAX14001 Bill of Materials

ITEM

REF_DES

VIN1, VIN2, AINEXT1, AINEXT2, 1 V300_13, FLT1_IN+,

FLT1_IN-, FLT2_IN+, FLT2_IN-, V300_13_2
3 C2, C8, C10, C11, C25, C26, C31, C34
4 C3, C29

DNI/DNP QTY
10 5014

MFG PART #
1 BFC233860103

GRM188R72A102KA01 C1608X7R2A102K
2 CGA3E2X7R2A103K C0603C103K1RA
5 C4 6 C5, C6, C13, C30, C32, C37 7 C7, C18, C33, C43
1 F339X134733MFP2B0

GRM188R72A104KA35 CC0603KRX7R0BB104
4 C1608X7R1V105K080AC
8 C14, C15, C35, C36
4 CL21B106KOQNNN
9 C21
10 D1, D2 11 D3, D4 12 DS3, DS4 13 DS5, DS6 14 DS7, DS8

VDD1, VDD2, VDDF1, VDDF2,

VDDL1, VDDL2, VREF1, VREF2, EXT_VDD1, EXT_VDD2,

EXT_VDDL1, EXT_VDDL2

GNDL, GATE1, GATE2, GNDF1,

GNDF2, ISET1, ISET2, GNDF1_T3, GNDL_TP14,

GNDF2_TP21
17 J1, J8, J14-J18, J32
18 J2, J4, J12, J26
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time.

Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. 2016 Maxim Integrated Products, Inc. 27

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX14001EVSYS# Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX14001EVSYS# 647221