MAX106CHC-D

MAX106CHC-D Datasheet

MAX106

Part	Datasheet
MAX106CHC-D	MAX106CHC-D (pdf)

PDF Datasheet Preview
MAX106 ±5V, 600Msps, 8-Bit ADC with On-Chip 2.2GHz Bandwidth Track/Hold Amplifier The MAX106 PECL-compatible, 600Msps, 8-bit analog-todigital converter ADC allows accurate digitizing of analog signals with bandwidths to 2.2GHz. Fabricated on Maxim’s proprietary advanced GST-2 bipolar process, the MAX106 integrates a high-performance track/hold T/H amplifier and a quantizer on a single monolithic die. The innovative design of the internal T/H, which has an exceptionally wide 2.2GHz full-power input bandwidth, results in high, effective bits performance at the Nyquist frequency. A fully differential comparator design and decoding circuitry combine to reduce out-ofsequence code errors thermometer bubbles or sparkle codes and provide excellent metastable performance of one error per 1027 clock cycles. Unlike other ADCs, which can have errors that result in false full- or zero-scale outputs, the MAX106 limits the error magnitude to 1LSB. The analog input is designed for either differential or single-ended use with a ±250mV input voltage range. Dual, differential, PECL-compatible output data paths ensure easy interfacing and include an 8:16 demultiplexer feature that reduces output data rates to one-half the sampling clock rate. The PECL outputs can be operated from any supply between +3V to +5V for compatibility with +3.3V or +5V referenced systems. Control inputs are provided for interleaving additional MAX106 devices to increase the effective system sampling rate. The MAX106 is packaged in a 25mm x 25mm, 192-contact Enhanced Super-Ball-Grid Array ESBGA , and is specified over the commercial 0°C to +70°C temperature range. For a pin-compatible higher speed upgrade, refer to the MAX104 1Gsps and MAX108 1.5Gsps data sheets. Digital RF/IF Signal Processing Direct RF Downconversion High-Speed Data Acquisition Digital Oscilloscopes High-Energy Physics Radar/ECM Systems ATE Systems o 600Msps Conversion Rate o 2.2GHz Full-Power Analog Input Bandwidth o Effective Bits at fIN = 300MHz Nyquist frequency o ±0.25LSB INL and DNL o Differential Analog Inputs o ±250mV Input Signal Range o On-Chip, +2.5V Precision Bandgap Voltage Reference o Latched, Differential PECL Digital Outputs o Low Error Rate 10-27 Metastable States o Selectable 8:16 Demultiplexer o Internal Demux Reset Input with Reset Output o 192-Contact ESBGA o Pin Compatible with Faster MAX104/MAX108 Ordering Information PART MAX106CHC TEMP RANGE 0°C to +70°C PIN-PACKAGE 192 ESBGA TOP VIEW 192-Contact ESBGA Ball Assignment Matrix MAX106 Typical Operating Circuit appears at end of data sheet. ESBGA is a trademark of Amkor/Anam. ESBGA Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at MAX106 ±5V, 600Msps, 8-Bit ADC with On-Chip 2.2GHz Bandwidth Track/Hold Amplifier ABSOLUTE MAXIMUM RATINGS VCCA to GNDA to +6V VCCD to +6V VCCI to GNDI to +6V VCCO to GNDD to VCCD + 0.3V AUXEN1, AUXEN2 to GND .....................-0.3V to VCCD + 0.3V VEE to +0.3V Between to +0.3V VCCA to VCCD to +0.3V VCCA to +0.3V PECL Digital Output Current REFIN to GNDR to VCCI + 0.3V REFOUT Current to -5mA ICONST, IPTAT to GNDI to +1.0V TTL/CMOS Control Inputs DEMUXEN, DIVSELECT ....................-0.3V to VCCD + 0.3V RSTIN+, RSTIN- to VCCO + 0.3V VOSADJ Adjust Input ................................-0.3V to VCCI + 0.3V CLK+ to CLK- Voltage CLK+, - 0.3V to GNDD + 1V - 0.3V to GNDD + 1V VIN+ to VIN- Voltage Difference VIN+, VIN- to Continuous Power Dissipation TA = +70°C 192-Contact ESBGA derate 61mW/°C above +70°C ...4.88W with heatsink and 200LFM airflow, derate 106mW/°C above +70°C Operating Temperature Range to +70°C Operating Junction Storage Temperature Range .............................-65°C to +150°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS VCCA = VCCI = VCCD = +5.0V ±5%, VEE = -5.0V ±5%, VCCO = +3.0V to VCCD, REFIN connected to REFOUT, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C. PARAMETER ACCURACY Resolution Integral Nonlinearity Note 1 Differential Nonlinearity Note 1 Missing Codes ANALOG INPUTS Full-Scale Input Range Note 1 Common-Mode Input Range Input Resistance Input Resistance Temperature Coefficient RES INL DNL VFSR VCM RIN TCR CONDITIONS TA = +25° C TA = +25° C No missing codes guaranteed Signal + offset w.r.t. GNDI VIN+ and VIN- to GNDI, TA = +25°C MIN TYP MAX UNITS Bits None Codes 525 mVp-p ppm/°C VOS ADJUST CONTROL INPUT Input Resistance Note 2 RVOS Input VOS Adjust Range REFERENCE INPUT AND OUTPUT Reference Output Voltage REFOUT VOSADJ = 0 to 2.5V Driving REFIN input only Reference Output Load Regulation Reference Input Resistance 0 < ISOURCE < 2.5mA RREF Referenced to GNDR MAX106 ±5V, 600Msps, 8-Bit ADC with On-Chip 2.2GHz Bandwidth Track/Hold Amplifier DC ELECTRICAL CHARACTERISTICS continued

PDF Datasheet Preview

MAX106
±5V, 600Msps, 8-Bit ADC with On-Chip 2.2GHz Bandwidth Track/Hold Amplifier

The MAX106 PECL-compatible, 600Msps, 8-bit analog-todigital converter ADC allows accurate digitizing of analog signals with bandwidths to 2.2GHz. Fabricated on Maxim’s proprietary advanced GST-2 bipolar process, the MAX106 integrates a high-performance track/hold T/H amplifier and a quantizer on a single monolithic die.

The innovative design of the internal T/H, which has an exceptionally wide 2.2GHz full-power input bandwidth, results in high, effective bits performance at the Nyquist frequency. A fully differential comparator design and decoding circuitry combine to reduce out-ofsequence code errors thermometer bubbles or sparkle codes and provide excellent metastable performance of one error per 1027 clock cycles. Unlike other ADCs, which can have errors that result in false full- or zero-scale outputs, the MAX106 limits the error magnitude to 1LSB.

The analog input is designed for either differential or single-ended use with a ±250mV input voltage range. Dual, differential, PECL-compatible output data paths ensure easy interfacing and include an 8:16 demultiplexer feature that reduces output data rates to one-half the sampling clock rate. The PECL outputs can be operated from any supply between +3V to +5V for compatibility with +3.3V or +5V referenced systems. Control inputs are provided for interleaving additional MAX106 devices to increase the effective system sampling rate.

The MAX106 is packaged in a 25mm x 25mm, 192-contact Enhanced Super-Ball-Grid Array ESBGA , and is specified over the commercial 0°C to +70°C temperature range. For a pin-compatible higher speed upgrade, refer to the MAX104 1Gsps and MAX108 1.5Gsps data sheets.

Digital RF/IF Signal Processing

Direct RF Downconversion

High-Speed Data Acquisition

Digital Oscilloscopes

High-Energy Physics

Radar/ECM Systems

ATE Systems
o 600Msps Conversion Rate o 2.2GHz Full-Power Analog Input Bandwidth o Effective Bits at fIN = 300MHz

Nyquist frequency o ±0.25LSB INL and DNL o Differential Analog Inputs o ±250mV Input Signal Range o On-Chip, +2.5V Precision Bandgap Voltage

Reference o Latched, Differential PECL Digital Outputs o Low Error Rate 10-27 Metastable States o Selectable 8:16 Demultiplexer o Internal Demux Reset Input with Reset Output o 192-Contact ESBGA o Pin Compatible with Faster MAX104/MAX108
Ordering Information

PART MAX106CHC

TEMP RANGE 0°C to +70°C

PIN-PACKAGE 192 ESBGA

TOP VIEW
192-Contact ESBGA Ball Assignment Matrix

MAX106

Typical Operating Circuit appears at end of data sheet.

ESBGA is a trademark of Amkor/Anam.

ESBGA

Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at

MAX106
±5V, 600Msps, 8-Bit ADC with On-Chip 2.2GHz Bandwidth Track/Hold Amplifier

ABSOLUTE MAXIMUM RATINGS

VCCA to GNDA to +6V VCCD to +6V VCCI to GNDI to +6V VCCO to GNDD to VCCD + 0.3V AUXEN1, AUXEN2 to GND .....................-0.3V to VCCD + 0.3V VEE to +0.3V Between to +0.3V

VCCA to VCCD to +0.3V VCCA to +0.3V PECL Digital Output Current

REFIN to GNDR to VCCI + 0.3V REFOUT Current to -5mA

ICONST, IPTAT to GNDI to +1.0V

TTL/CMOS Control Inputs

DEMUXEN, DIVSELECT ....................-0.3V to VCCD + 0.3V RSTIN+, RSTIN- to VCCO + 0.3V

VOSADJ Adjust Input ................................-0.3V to VCCI + 0.3V CLK+ to CLK- Voltage CLK+, - 0.3V to GNDD + 1V - 0.3V to GNDD + 1V VIN+ to VIN- Voltage Difference VIN+, VIN- to Continuous Power Dissipation TA = +70°C
192-Contact ESBGA derate 61mW/°C above +70°C ...4.88W with heatsink and 200LFM airflow, derate 106mW/°C above +70°C Operating Temperature Range to +70°C Operating Junction Storage Temperature Range .............................-65°C to +150°C

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

DC ELECTRICAL CHARACTERISTICS

VCCA = VCCI = VCCD = +5.0V ±5%, VEE = -5.0V ±5%, VCCO = +3.0V to VCCD, REFIN connected to REFOUT, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.

PARAMETER ACCURACY Resolution Integral Nonlinearity Note 1 Differential Nonlinearity Note 1 Missing Codes ANALOG INPUTS Full-Scale Input Range Note 1 Common-Mode Input Range Input Resistance

Input Resistance Temperature Coefficient

RES INL DNL

VFSR VCM RIN TCR

CONDITIONS

TA = +25° C TA = +25° C No missing codes guaranteed

Signal + offset w.r.t. GNDI VIN+ and VIN- to GNDI, TA = +25°C

MIN TYP MAX UNITS

Bits

None Codes
525 mVp-p
ppm/°C

VOS ADJUST CONTROL INPUT

Input Resistance Note 2

RVOS

Input VOS Adjust Range

REFERENCE INPUT AND OUTPUT

Reference Output Voltage

REFOUT

VOSADJ = 0 to 2.5V Driving REFIN input only

Reference Output Load Regulation

Reference Input Resistance
0 < ISOURCE < 2.5mA RREF Referenced to GNDR

MAX106
±5V, 600Msps, 8-Bit ADC with On-Chip 2.2GHz Bandwidth Track/Hold Amplifier

DC ELECTRICAL CHARACTERISTICS continued

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MAX106CHC-D Datasheet file may be downloaded here without warranties.

Datasheet ID: MAX106CHC-D 647200