DG406DN

DG406DN Datasheet

DG406/DG407

Part	Datasheet
DG406DN	DG406DN (pdf)

PDF Datasheet Preview
DG406/DG407 Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers Maxim’s redesigned DG406 and DG407 CMOS analog multiplexers now feature guaranteed matching between channels max and flatness over the specified signal range max . These low on-resistance muxes max conduct equally well in either direction and feature guaranteed low charge injection 15pC max . In addition, these new muxes offer low input off-leakage current over than 5nA at +85°C. The DG406 is a 1 of 16 multiplexer/demultiplexer and the DG407 is a dual 8-channel multiplexer/demultiplexer. Both muxes operate with a +4.5V to +30V single supply and with ±4.5V to ±20V dual supplies. ESD protection is guaranteed to be greater than 2000V per Method of MIL-STD These improved muxes are pin-compatible plug-in upgrades for the industry standard DG406 and DG407. Sample-and-Hold Circuits Test Equipment Guidance and Control Systems Communications Systems Data-Acquisition Systems Audio Signal Routing Configurations o Pin-Compatible Plug-In Upgrade for Industry Standard DG406/DG407 o Guaranteed Matching Between Channels, Max o Guaranteed On-Resistance Flatness, Max o Guaranteed Low Charge Injection, 15pC Max o Low On-Resistance Max o Input Leakage, 5nA Max at +85°C o Low Power Consumption, 1.25mW Max o Rail-to-Rail Signal Handling o Digital Input Controls TTL/CMOS Compatible o ESD Protection >2000V per Method Ordering Information PART TEMP RANGE PIN-PACKAGE DG406CJ 0°C to +70°C 28 Plastic DIP DG406CWI DG406C/D 0°C to +70°C 0°C to +70°C 28 Wide SO Dice* DG406DJ DG406DWI DG406DN DG406AK -40°C to +85°C -40°C to +85°C -40°C to +85°C -55°C to +125°C 28 Plastic DIP 28 Wide SO 28 PLCC 28 CERDIP Ordering Information continued at end of data sheet. * Contact factory for dice specifications. Diagrams TOP VIEW V+ 1 N.C. 2 N.C. 3 S16 4 S15 5 S14 6 S13 7 S12 8 S11 9 S10 10 S9 11 GND 12 N.C. 13 A3 14 DG406 DG407 at end of data sheet. DIP/SO 28 D 27 V26 S8 25 S7 24 S6 23 S5 22 S4 21 S3 20 S2 19 S1 18 EN 17 A0 16 A1 15 A2 CMOS DECODERS/DRIVERS A0 A1 A2 A3 EN DG406 16-CHANNEL SINGLE-ENDED MULTIPLEXER DG407 at end of data sheet. Maxim Integrated Products 1 For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at DG406/DG407 Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers ABSOLUTE MAXIMUM RATINGS Voltage Referenced to VV+ 44V GND 25V Digital Inputs, S, D Note 1 .................... V- - 2V to V+ + 2V or 30mA whichever occurs first Continuous Current any terminal Peak Current, S or D pulsed at 1ms, 10% duty cycle max ..........................100mA Continuous Power Dissipation TA = +70°C Plastic DIP derate 9.09mW/°C above +70°C ............727mW Wide SO derate 12.50mW/°C above +70°C ............1000mW PLCC derate 10.53mW/°C above +70°C ..................842mW CERDIP derate 16.67mW/°C above +70°C .............1333mW Operating Temperature Ranges DG406/DG407C_ to +70°C DG406/DG407D_ to +85°C DG406/DG407AK to +125°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature soldering, 10sec .............................+300°C Note 1 Signals on S_, D_, A0, A1, A2, A3, or EN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current ratings. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL Supplies V+ = 15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted. PARAMETER CONDITIONS MIN TYP MAX Note 2 SWITCH Analog Signal Range VANALOG Note 3 Drain-Source On-Resistance rDS ON IS = -1.0mA, VD = ±10V TA = +25°C TA = TMIN to TMAX 60 100 125 On-Resistance Matching Between Channels IS = -1.0mA, VD = ±10V Note 4 TA = +25°C TA = TMIN to TMAX On-Resistance Flatness rFLAT IS = -1.0mA, VD = ±5V or 0V TA = +25°C TA = TMIN to TMAX Source-Off Leakage Current Note 5 IS OFF VD = +10V, VS = ±10V, VEN = 0V TA = +25°C TA = TMIN C, D to TMAX Drain-Off Leakage Current Note 5 ID OFF VD = ±10V, VS = +10V, VEN = 0V VD = +10V, VS = ±10V, VEN = 0V _Ordering Information continued PART DG407CJ DG407CWI DG407C/D DG407DJ DG407DWI DG407DN DG407AK TEMP. RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -55°C to +125°C PIN-PACKAGE 28 Plastic DIP 28 Wide SO Dice* 28 Plastic DIP 28 Wide SO 28 PLCC 28 CERDIP * Contact factory for dice specifications. A0 A1 A2 EN DG407 8-CHANNEL DIFFERENTIAL MULTIPLEXER DG406/DG407 Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers Topographies EN A0 DG406 A1 A2 A3 N.C. EN A0 DG407 A1 A2 N.C. N.C. S1 S2 S3 S4 S5 S6 S7 S8 1.98mm 4.67mm GND S9 S10 S11 S12 S13 S14 S15 S16 N.C. S1A S2A S3A S4A S5A S6A S7A S8A 1.98mm 4.67mm GND S1B S2B S3B S4B S5B S6B S7B S8B DB N.C. = NO INTERNAL CONNECTION TRANSISTOR COUNT 269 SUBSTRATE IS INTERNALLY CONNECTED TO V+ TRANSISTOR COUNT 269 SUBSTRATE IS INTERNALLY CONNECTED TO V+ Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 12 Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 2003 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.

PDF Datasheet Preview

DG406/DG407

Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers

Maxim’s redesigned DG406 and DG407 CMOS analog multiplexers now feature guaranteed matching between channels max and flatness over the specified signal range max . These low on-resistance muxes max conduct equally well in either direction and feature guaranteed low charge injection 15pC max . In addition, these new muxes offer low input off-leakage current over than 5nA at +85°C.

The DG406 is a 1 of 16 multiplexer/demultiplexer and the DG407 is a dual 8-channel multiplexer/demultiplexer. Both muxes operate with a +4.5V to +30V single supply and with ±4.5V to ±20V dual supplies. ESD protection is guaranteed to be greater than 2000V per Method of MIL-STD These improved muxes are pin-compatible plug-in upgrades for the industry standard DG406 and DG407.

Sample-and-Hold Circuits

Test Equipment

Guidance and Control Systems

Communications Systems

Data-Acquisition Systems

Audio Signal Routing

Configurations
o Pin-Compatible Plug-In Upgrade for Industry Standard DG406/DG407
o Guaranteed Matching Between Channels, Max o Guaranteed On-Resistance Flatness, Max o Guaranteed Low Charge Injection, 15pC Max o Low On-Resistance Max o Input Leakage, 5nA Max at +85°C o Low Power Consumption, 1.25mW Max o Rail-to-Rail Signal Handling o Digital Input Controls TTL/CMOS Compatible o ESD Protection >2000V per Method
Ordering Information

PART

TEMP RANGE

PIN-PACKAGE

DG406CJ
0°C to +70°C
28 Plastic DIP

DG406CWI DG406C/D
0°C to +70°C 0°C to +70°C
28 Wide SO Dice*

DG406DJ DG406DWI DG406DN DG406AK
-40°C to +85°C -40°C to +85°C -40°C to +85°C -55°C to +125°C
28 Plastic DIP 28 Wide SO 28 PLCC 28 CERDIP
Ordering Information continued at end of data sheet. * Contact factory for dice specifications.

Diagrams

TOP VIEW

V+ 1 N.C. 2 N.C. 3 S16 4 S15 5 S14 6 S13 7 S12 8 S11 9 S10 10

S9 11 GND 12 N.C. 13

A3 14

DG406

DG407 at end of data sheet. DIP/SO
28 D 27 V26 S8 25 S7 24 S6 23 S5 22 S4 21 S3 20 S2 19 S1 18 EN 17 A0 16 A1 15 A2

CMOS DECODERS/DRIVERS

A0 A1 A2 A3 EN

DG406 16-CHANNEL SINGLE-ENDED MULTIPLEXER

DG407 at end of data sheet.

Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at

DG406/DG407

Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers

ABSOLUTE MAXIMUM RATINGS

Voltage Referenced to VV+ 44V GND 25V

Digital Inputs, S, D Note 1 .................... V- - 2V to V+ + 2V or 30mA whichever occurs first

Continuous Current any terminal Peak Current, S or D
pulsed at 1ms, 10% duty cycle max ..........................100mA Continuous Power Dissipation TA = +70°C

Plastic DIP derate 9.09mW/°C above +70°C ............727mW

Wide SO derate 12.50mW/°C above +70°C ............1000mW PLCC derate 10.53mW/°C above +70°C ..................842mW CERDIP derate 16.67mW/°C above +70°C .............1333mW Operating Temperature Ranges DG406/DG407C_ to +70°C DG406/DG407D_ to +85°C DG406/DG407AK to +125°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature soldering, 10sec .............................+300°C

Note 1 Signals on S_, D_, A0, A1, A2, A3, or EN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current ratings.

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

ELECTRICAL Supplies

V+ = 15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.

PARAMETER

CONDITIONS

MIN TYP MAX Note 2

SWITCH

Analog Signal Range

VANALOG Note 3

Drain-Source On-Resistance rDS ON

IS = -1.0mA, VD = ±10V

TA = +25°C TA = TMIN to TMAX
60 100 125

On-Resistance Matching Between Channels

IS = -1.0mA, VD = ±10V Note 4

TA = +25°C TA = TMIN to TMAX

On-Resistance Flatness
rFLAT

IS = -1.0mA, VD = ±5V or 0V

TA = +25°C TA = TMIN to TMAX

Source-Off Leakage Current Note 5

IS OFF

VD = +10V, VS = ±10V, VEN = 0V

TA = +25°C

TA = TMIN C, D
to TMAX

Drain-Off Leakage Current Note 5

ID OFF

VD = ±10V, VS = +10V, VEN = 0V

VD = +10V, VS = ±10V, VEN = 0V
_Ordering Information continued

PART DG407CJ DG407CWI DG407C/D DG407DJ DG407DWI DG407DN DG407AK

TEMP. RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -55°C to +125°C

PIN-PACKAGE 28 Plastic DIP 28 Wide SO Dice* 28 Plastic DIP 28 Wide SO 28 PLCC 28 CERDIP
* Contact factory for dice specifications.

A0 A1 A2 EN

DG407 8-CHANNEL DIFFERENTIAL MULTIPLEXER

DG406/DG407

Improved, 16-Channel/Dual 8-Channel, CMOS Analog Multiplexers

Topographies

EN A0

DG406

A1 A2 A3 N.C.

EN A0

DG407

A1 A2 N.C. N.C.

S1 S2 S3 S4 S5 S6 S7 S8
1.98mm
4.67mm GND

S9 S10 S11 S12 S13 S14 S15 S16 N.C.

S1A S2A S3A S4A S5A S6A S7A S8A
1.98mm
4.67mm GND

S1B S2B S3B S4B S5B S6B S7B S8B DB

N.C. = NO INTERNAL CONNECTION

TRANSISTOR COUNT 269 SUBSTRATE IS INTERNALLY CONNECTED TO V+

TRANSISTOR COUNT 269 SUBSTRATE IS INTERNALLY CONNECTED TO V+

Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
2003 Maxim Integrated Products

Printed USA
is a registered trademark of Maxim Integrated Products.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DG406DN Datasheet file may be downloaded here without warranties.

Datasheet ID: DG406DN 647144