MT-70

MT-70 Datasheet

MT-70 Microtorch

Part	Datasheet
MT-70	MT-70 (pdf)

Related Parts	Information
MT-70P	MT-70P

PDF Datasheet Preview
MT-70 Microtorch Instructions MT-70 IS SHIPPED WITHOUT FUEL. Content and Parts Identification Flame Guard Aperture Ignition button Fuel Adjustment wheel Removable stand Safety lock Filler valve Shutter lever Hands Free On/OFF slide ONE YEAR FULL WARRANTY Your Master MT-70 butane powered Microtorch tool was carefully tested and inspected before it was shipped from the factory. We warrant this product to be free from defects in materials and workmanship under normal use and service for one year from date of purchase. In the event of a defect in materials or workmanship, we will either repair or replace, without charge, at our option, any part which in our judgment shows evidence of such defect. This warranty does not apply if the MT-70 has been misused, abused, altered, tampered with or used with butane fuel other than Master Appliance Ultratane butane fuel. At the end of the warranty period, Master Appliance shall be under no further obligation expressed or implied. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Master Appliance assumes no responsibility for and this warranty shall not cover any incidental or consequential damages from any defect in this product or its use. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to you. This warranty gives you specific rights and you may also have other rights which may vary from state to state. For warranty repair a proof of purchase receipt or other appropriate proof of date is required with your return for warranty repair to Master Appliance. All warranty claims must be made to Master Appliance and not the distributor. We decline responsibility where repairs have been made or attempted by others. Any different guarantee made by others is not authorized by us. If a warranty claim is to be made please return your MT-70 prepaid, with proof of purchase and a note describing the problem to our customer service department. See below. For repair service we charge a flat rate fee. Please call Master Appliance for the flat rate charge. Return your MT-70 prepaid, with a note describing the problem. Remove gas before shipment. Master Appliance Corp. 2420 - 18th St., Racine, WI 53403 Phone 262-633-7791 Fax 262-633-9745 LOCK OFF ON OFF THE MT-70 MICROTORCH DOES NOT CONTAIN BUTANE GAS WHEN PURCHASED GAS REFILLING • Use only Master Ultratane Butane Fuel. • Make sure that the fuel adjustment wheel 2 is in “off” - position. • Shake gas container a few times to warm fuel up. • Insert the container nozzle tip vertically down into the gas refill opening 7 . Use a pumping action for best results. fig 1 • After filling allow a few minutes for the gas to stabilize. LIGHTING • Turn fuel adjustment wheel 2 counterclockwise 2/3 of a turn. • Using both hands, pull safety lock down and hold with one hand, while simultaneously depressing trigger with free hand. Flame will ignite instantly. fig. 2 • For hands free use, follow instructions above. When trigger is COMPLETELY depressed, move the hands free on/off slide to the right. fig. 5 FLAME/TEMPERATURE ADJUSTMENT • Adjust the torch flame by turning the fuel adjustment wheel clock- wise - or counterclockwise Adjust the flame to approximately 1/2 to 1 in. 10-25 mm in length when using. Counterclockwise + gives you a longer broad flame, clockwise - gives you a shorter pinpoint flame. Don’t make the flame too long as it will only waste the gas and make the flame unstable. fig. 3 STORAGE • Turn fuel adjustment wheel clockwise - to off. If engaged, move on/off slide lock to the left to shut off the gas flow. fig. 5 • Make sure that the torch/tips are cool before storing or leaving unattended. CAUTION Keep out of reach of children. Do not touch flame guard when hot! Butane gas is extremely flammable, please handle with care. Always point away from eyes and body when igniting or operating. Do not store under direct sunlight or anywhere that will exceed 104°F/40°C. Make sure that the on/off adjustment knob fig. 5 is firmly closed and the flame is completely extinguished after using. Under no circumstances should you attempt to repair a damaged torch. After using, let the tool cool down before storing. WARNING The Department of Transportation Hazardous material Regulations forbid the carriage of butane or other flammable gas products on passenger aircraft. Do not pack this item or any other flammable gas item, in any checked or carry-on baggage. WARNING This product, when used for soldering and similar applications, produces chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Designers and Manufacturers of Heat Tools Master Appliance Corp. 2420 - 18th St., Racine, WI 53403 Phone 262-633-7791 Fax 262-633-9745 MT-70

PDF Datasheet Preview

MT-70 Microtorch

Instructions

MT-70 IS SHIPPED WITHOUT FUEL.

Content and Parts Identification

Flame Guard Aperture Ignition button

Fuel Adjustment wheel Removable stand

Safety lock

Filler valve

Shutter lever

Hands Free On/OFF slide

ONE YEAR FULL WARRANTY

Your Master MT-70 butane powered Microtorch tool was carefully tested and inspected before it was shipped from the factory. We warrant this product to be free from defects in materials and workmanship under normal use and service for one year from date of purchase. In the event of a defect in materials or workmanship, we will either repair or replace, without charge, at our option, any part which in our judgment shows evidence of such defect.

This warranty does not apply if the MT-70 has been misused, abused, altered, tampered with or used with butane fuel other than Master Appliance Ultratane butane fuel. At the end of the warranty period, Master Appliance shall be under no further obligation expressed or implied. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Master Appliance assumes no responsibility for and this warranty shall not cover any incidental or consequential damages from any defect in this product or its use. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to you.

This warranty gives you specific rights and you may also have other rights which may vary from state to state.

For warranty repair a proof of purchase receipt or other appropriate proof of date is required with your return for warranty repair to Master Appliance. All warranty claims must be made to Master Appliance and not the distributor. We decline responsibility where repairs have been made or attempted by others. Any different guarantee made by others is not authorized by us. If a warranty claim is to be made please return your MT-70 prepaid, with proof of purchase and a note describing the problem to our customer service department. See below.

For repair service we charge a flat rate fee. Please call Master Appliance for the flat rate charge. Return your MT-70 prepaid, with a note describing the problem. Remove gas before shipment.

Master Appliance Corp. 2420 - 18th St., Racine, WI 53403 Phone 262-633-7791 Fax 262-633-9745

LOCK OFF

ON OFF

THE MT-70 MICROTORCH DOES NOT CONTAIN BUTANE GAS WHEN PURCHASED

GAS REFILLING
• Use only Master Ultratane Butane Fuel.
• Make sure that the fuel adjustment wheel 2 is in “off” - position.
• Shake gas container a few times to warm fuel up.
• Insert the container nozzle tip vertically down into the gas refill
opening 7 . Use a pumping action for best results. fig 1
• After filling allow a few minutes for the gas to stabilize.

LIGHTING
• Turn fuel adjustment wheel 2 counterclockwise 2/3 of a turn.
• Using both hands, pull safety lock down and hold with one hand,
while simultaneously depressing trigger with free hand. Flame will ignite instantly. fig. 2
• For hands free use, follow instructions above. When trigger is COMPLETELY depressed, move the hands free on/off slide to the right. fig. 5

FLAME/TEMPERATURE ADJUSTMENT
• Adjust the torch flame by turning the fuel adjustment wheel clock-
wise - or counterclockwise Adjust the flame to approximately 1/2 to 1 in. 10-25 mm in length when using. Counterclockwise + gives you a longer broad flame, clockwise - gives you a shorter pinpoint flame. Don’t make the flame too long as it will only waste the gas and make the flame unstable. fig. 3

STORAGE
• Turn fuel adjustment wheel clockwise - to off. If engaged, move
on/off slide lock to the left to shut off the gas flow. fig. 5
• Make sure that the torch/tips are cool before storing or
leaving unattended.

CAUTION Keep out of reach of children. Do not touch flame guard when hot! Butane gas is extremely flammable, please handle with care. Always point away from eyes and body when igniting
or operating. Do not store under direct sunlight or anywhere that will exceed
104°F/40°C. Make sure that the on/off adjustment knob fig. 5 is firmly
closed and the flame is completely extinguished after using. Under no circumstances should you attempt to repair a
damaged torch. After using, let the tool cool down before storing.

WARNING The Department of Transportation Hazardous material Regulations forbid the carriage of butane or other flammable gas products on passenger aircraft. Do not pack this item or any other flammable gas item, in any checked or carry-on baggage.

WARNING This product, when used for soldering and similar applications, produces chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Designers and Manufacturers of Heat Tools

Master Appliance Corp. 2420 - 18th St., Racine, WI 53403 Phone 262-633-7791 Fax 262-633-9745

MT-70

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MT-70 Datasheet file may be downloaded here without warranties.

Datasheet ID: MT-70 647103