MX29SL800CBTI-90G

MX29SL800CBTI-90G Datasheet

MX29SL800C T/B MX29SL802C T/B

Part	Datasheet
MX29SL800CBTI-90G	MX29SL800CBTI-90G (pdf)

Related Parts	Information
MX29SL800CTXEI-90G	MX29SL800CTXEI-90G
MX29SL802CBXHI-90G	MX29SL802CBXHI-90G
MX29SL800CTTI-90G	MX29SL800CTTI-90G
MX29SL802CTXHI-90G	MX29SL802CTXHI-90G
MX29SL800CBXEC-90G	MX29SL800CBXEC-90G
MX29SL800CBXEI-90G	MX29SL800CBXEI-90G
MX29SL800CBXBI-90G	MX29SL800CBXBI-90G
MX29SL800CTXBI-90G	MX29SL800CTXBI-90G

PDF Datasheet Preview
MX29SL800C T/B MX29SL802C T/B 8M-BIT [1M x 8 / 512K x 16] SINGLE VOLTAGE 1.8V ONLY FLASH MEMORY GENERAL FEATURES • Single Power Supply Operation - to volt for read, erase, and program operations • 1,048,576 x 8 / 524,288 x 16 switchable • Boot Sector Architecture - T = Top Boot Sector - B = Bottom Boot Sector • Sector Structure - 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x 1, and 64K-Byte x 15 • Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotected allows code changes in previously locked sectors • Latch-up protected to 100mA from -1V to Vcc + 1V • Compatible with JEDEC standard - Pinout and software compatible to single power supply Flash PERFORMANCE • High Performance - Access time 90ns - Byte/Word program time 12us/18us typical - Erase time 1.3s/sector, 18s/chip typical • Low Power Consumption - Low active read current 6mA maximum at 5MHz - Low standby current 1uA typical • Minimum 100,000 erase/program cycle • 10 years data retention SOFTWARE FEATURES • Erase Suspend/ Erase Resume - Suspends sector erase operation to read data from or program data to another sector which is not being erased • Status Reply - Data# Polling & Toggle bits provide detection of program and erase operation completion • Support Common Flash Interface CFI HARDWARE FEATURES • Ready/Busy# RY/BY# Output - Provides a hardware method of detecting program and erase operation completion • Hardware Reset# Input - Provides a hardware method to reset the internal state machine to read mode PACKAGE • 48-Pin TSOP • 48-Ball CSP LFBGA/TFBGA/WFBGA • 48-Ball XFLGA • All Pb-free devices are RoHS Compliant P/N:PM1244 1 PIN CONFIGURATIONS 48 TSOP Standard Type 12mm x 20mm RESET# RY/BY# MX29SL800C T/B MX29SL802C T/B BYTE# Q15/A-1 48-Ball CSP Ball Pitch = mm , Top View, Balls Facing Down BYTE# Q15/ SET# RY/BY# P/N:PM1244 MX29SL800C T/B MX29SL802C T/B 48-Ball XFLGA Land Pitch = 0.5mm, Package Height = 0.5mm , Top View, Balls Facing Down RESET# GND OE# Q9 BYTE# Q12 Q13 Q15/ 48-Ball WFBGA Balls Facing Down, 4 x 6 x mm for 29SL802C A6 A17 NC WE# NC A7 NC NC A10 A13 A14 A12 A15 CE# Q8 Q10 ORDERING INFORMATION PART NO. MX29SL800CTTC-90G ACCESS TIME ns MX29SL800CBTC-90G MX29SL800CTXBC-90G 90 MX29SL800CBXBC-90G 90 MX29SL800CTXEC-90G 90 MX29SL800CBXEC-90G 90 MX29SL800CTTI-90G MX29SL800CBTI-90G MX29SL800CTXBI-90G MX29SL800CBXBI-90G 90 MX29SL800CTXEI-90G MX29SL800CBXEI-90G 90 MX29SL802CTXHI-90G 4 x 6 x 0.75mm MX29SL802CBXHI-90G 90 4 x 6 x 0.75mm MX29SL800CTGBI-90G 90 4 x 6 x 0.5mm MX29SL800CBGBI-90G 90 4 x 6 x 0.5mm OPERATING Current MAX. mA STANDBY Current MAX. uA PACKAGE Remark 48-Pin TSOP Pb-free Normal Type 48-Pin TSOP Pb-free Normal Type 48-ball CSP Pb-free Ball Size:0.3mm 48-ball CSP Pb-free Ball Size:0.3mm 48-ball CSP Pb-free Ball Size:0.4mm 48-ball CSP Pb-free Ball Size:0.4mm Modified Ordering Information Modified Switching Test Circuits Removed part no. MX29SL800CTXHI-90G & MX29SL800CBXHI-90G Page P1 P58 All P59 P1,3,53,54, P59 P50 P3,53,59 Date APR/20/2006 JUN/20/2006 AUG/14/2006 AUG/17/2006 NOV/06/2006 NOV/14/2006 NOV/14/2007 DEC/18/2007 P52 P17 P32 P52 P21 P52,53 FEB/25/2008 MAR/18/2008 NOV/20/2008 P/N:PM1244 MX29SL800C T/B MX29SL802C T/B Macronix's products are not designed, manufactured, or intended for use for any high risk applications in which the failure of a single component could cause death, personal injury, severe physical damage, or other substantial harm to persons or property, such as life-support systems, high temperature automotive, medical, aircraft and military application. Macronix and its suppliers will not be liable to you and/or any third party for any claims, injuries or damages that may be incurred due to use of Macronix's products in the prohibited applications. MACRONIX INTERNATIONAL CO., LTD. Headquarters Macronix, Int'l Co., Ltd. 16, Li-Hsin Road, Science Park, Hsinchu, Taiwan, R.O.C. Tel +886-3-5786688 Fax +886-3-5632888 Macronix America, Inc. 680 North McCarthy Blvd. Milpitas, CA 95035, U.S.A. Tel +1-408-262-8887 Fax +1-408-262-8810 Email: Macronix Asia Limited. NKF Bldg. 5F, 1-2 Higashida-cho, Kawasaki-ku Kawasaki-shi, Kanagawa Pref. 210-0005, Japan Tel +81-44-246-9100 Fax +81-44-246-9105 Macronix Hong Kong Co., Limited. 702-703, 7/F, Building 9, Hong Kong Science Park, 5 Science Park West Avenue, Sha Tin, N.T. Tel +86-852-2607-4289 Fax +86-852-2607-4229 Taipei Office Macronix, Int'l Co., Ltd. 19F, 4, Min-Chuan E. Road, Sec. 3, Taipei, Taiwan, R.O.C. Tel +886-2-2509-3300 Fax +886-2-2509-2200 Macronix Europe N.V. Koningin Astridlaan 59, Bus 1 1780 Wemmel Belgium Tel +32-2-456-8020 Fax +32-2-456-8021 Singapore Office Macronix Pte. Ltd. 1 Marine Parade Central #11-03 Parkway Centre Singapore 449408 Tel +65-6346-5505 Fax +65-6348-8096 MACRONIX INTERNATIONAL CO., LTD. reserves the right to change product and specifications without notice.

PDF Datasheet Preview

MX29SL800C T/B MX29SL802C T/B
8M-BIT [1M x 8 / 512K x 16] SINGLE VOLTAGE 1.8V ONLY FLASH MEMORY

GENERAL FEATURES
• Single Power Supply Operation
- to volt for read, erase, and program operations
• 1,048,576 x 8 / 524,288 x 16 switchable
• Boot Sector Architecture
- T = Top Boot Sector - B = Bottom Boot Sector
• Sector Structure - 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x 1, and 64K-Byte x 15
• Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotected allows code changes in previously locked sectors
• Latch-up protected to 100mA from -1V to Vcc + 1V
• Compatible with JEDEC standard - Pinout and software compatible to single power supply Flash

PERFORMANCE
• High Performance
- Access time 90ns - Byte/Word program time 12us/18us typical - Erase time 1.3s/sector, 18s/chip typical
• Low Power Consumption - Low active read current 6mA maximum at 5MHz - Low standby current 1uA typical
• Minimum 100,000 erase/program cycle
• 10 years data retention

SOFTWARE FEATURES
• Erase Suspend/ Erase Resume
- Suspends sector erase operation to read data from or program data to another sector which is not being erased
• Status Reply
- Data# Polling & Toggle bits provide detection of program and erase operation completion
• Support Common Flash Interface CFI

HARDWARE FEATURES
• Ready/Busy# RY/BY# Output
- Provides a hardware method of detecting program and erase operation completion
• Hardware Reset# Input
- Provides a hardware method to reset the internal state machine to read mode

PACKAGE
• 48-Pin TSOP
• 48-Ball CSP LFBGA/TFBGA/WFBGA
• 48-Ball XFLGA
• All Pb-free devices are RoHS Compliant

P/N:PM1244 1

PIN CONFIGURATIONS 48 TSOP Standard Type 12mm x 20mm

RESET#

RY/BY#

MX29SL800C T/B MX29SL802C T/B

BYTE#

Q15/A-1
48-Ball CSP Ball Pitch = mm , Top View, Balls Facing Down

BYTE#

Q15/

SET#

RY/BY#

P/N:PM1244

MX29SL800C T/B MX29SL802C T/B
48-Ball XFLGA Land Pitch = 0.5mm, Package Height = 0.5mm , Top View, Balls Facing Down

RESET#

GND OE#

Q9 BYTE#

Q12 Q13

Q15/
48-Ball WFBGA Balls Facing Down, 4 x 6 x mm for 29SL802C

A6 A17 NC WE# NC

A7 NC

NC A10

A13 A14

A12 A15

CE# Q8 Q10
ORDERING INFORMATION

PART NO. MX29SL800CTTC-90G

ACCESS TIME ns

MX29SL800CBTC-90G

MX29SL800CTXBC-90G 90

MX29SL800CBXBC-90G 90

MX29SL800CTXEC-90G 90

MX29SL800CBXEC-90G 90

MX29SL800CTTI-90G

MX29SL800CBTI-90G

MX29SL800CTXBI-90G

MX29SL800CBXBI-90G 90

MX29SL800CTXEI-90G

MX29SL800CBXEI-90G 90

MX29SL802CTXHI-90G
4 x 6 x 0.75mm

MX29SL802CBXHI-90G 90 4 x 6 x 0.75mm

MX29SL800CTGBI-90G 90 4 x 6 x 0.5mm

MX29SL800CBGBI-90G 90 4 x 6 x 0.5mm

OPERATING Current MAX. mA

STANDBY Current MAX. uA

PACKAGE

Remark
48-Pin TSOP

Pb-free

Normal Type
48-Pin TSOP

Pb-free

Normal Type
48-ball CSP

Pb-free

Ball Size:0.3mm
48-ball CSP

Pb-free

Ball Size:0.3mm
48-ball CSP

Pb-free

Ball Size:0.4mm
48-ball CSP

Pb-free

Ball Size:0.4mm
Modified Ordering Information

Modified Switching Test Circuits

Removed part no. MX29SL800CTXHI-90G &

MX29SL800CBXHI-90G

Page P1 P58 All P59 P1,3,53,54, P59 P50 P3,53,59

Date APR/20/2006 JUN/20/2006 AUG/14/2006 AUG/17/2006 NOV/06/2006 NOV/14/2006

NOV/14/2007 DEC/18/2007

P52 P17 P32 P52 P21 P52,53

FEB/25/2008 MAR/18/2008

NOV/20/2008

P/N:PM1244

MX29SL800C T/B MX29SL802C T/B

Macronix's products are not designed, manufactured, or intended for use for any high risk applications in which the failure of a single component could cause death, personal injury, severe physical damage, or other substantial harm to persons or property, such as life-support systems, high temperature automotive, medical, aircraft and military application. Macronix and its suppliers will not be liable to you and/or any third party for any claims, injuries or damages that may be incurred due to use of Macronix's products in the prohibited applications.

MACRONIX INTERNATIONAL CO., LTD.

Headquarters Macronix, Int'l Co., Ltd.
16, Li-Hsin Road, Science Park, Hsinchu, Taiwan, R.O.C. Tel +886-3-5786688 Fax +886-3-5632888

Macronix America, Inc.
680 North McCarthy Blvd. Milpitas, CA 95035, U.S.A. Tel +1-408-262-8887 Fax +1-408-262-8810 Email:

Macronix Asia Limited.

NKF Bldg. 5F, 1-2 Higashida-cho, Kawasaki-ku Kawasaki-shi, Kanagawa Pref. 210-0005, Japan Tel +81-44-246-9100 Fax +81-44-246-9105

Macronix Hong Kong Co., Limited.
702-703, 7/F, Building 9, Hong Kong Science Park, 5 Science Park West Avenue, Sha Tin, N.T. Tel +86-852-2607-4289 Fax +86-852-2607-4229

Taipei Office Macronix, Int'l Co., Ltd.
19F, 4, Min-Chuan E. Road, Sec. 3, Taipei, Taiwan, R.O.C. Tel +886-2-2509-3300 Fax +886-2-2509-2200

Macronix Europe N.V.

Koningin Astridlaan 59, Bus 1 1780 Wemmel Belgium Tel +32-2-456-8020 Fax +32-2-456-8021

Singapore Office Macronix Pte. Ltd.
1 Marine Parade Central #11-03 Parkway Centre Singapore 449408 Tel +65-6346-5505 Fax +65-6348-8096

MACRONIX INTERNATIONAL CO., LTD. reserves the right to change product and specifications without notice.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MX29SL800CBTI-90G Datasheet file may be downloaded here without warranties.

Datasheet ID: MX29SL800CBTI-90G 646966